merhaba arkadaşlar. ubuntuyu kurdum ve sitede anlattiğiniz yöntemler ile (envy, harware drivers) ekran kartimi tanitmayi denedim. Tanitabildimmi bilmiyorum ama çözünürlüğümü yükseltmek için /etc/X11/xorg.conf dosyasına baktım ve çözünürlük ile ilgili birşey bulamadım. bana yardımcı olabilirmisiniz. ekran kartım nvidia mx/400
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "tr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
Option "NoLogo" "True"
Driver "nvidia"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
Option "AddARGBGLXVisuals" "True"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection
Section "Module"
Load "glx"
EndSection
Settings başlığı altında normal yoldan değişmiyor mu çözünürlük.
"Settings>preferences>çözünürlük"(başka sistemdeyim adı aklıma gelmedi)
maximum 1024x768 var
Alıntı yapılan: cookie - 20 Haziran 2008 - 10:45:21
maximum 1024x768 var
Şuan başka sistemdeyim. Bütün notlarım evde kaldı.
Ama çok net hatırlıyorum forumda böyle bir yazı var.
Araçtırırsanız...
peki. sağolasın. birazdaha araştırayım
lspci | grep VGA
ve glxinfo | grep render
çıktılarını vermen gerek, yüklenip yüklenmediğini görmek için.
buyur,,
root@cookie:~# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
root@cookie:~# glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce2 MX/AGP/SSE2
Tamam sürücülerin düzgün yüklenmiş ve 3D desteğin var. Yapılacak şey çözünürlük değerlerini xorg.conf dosyasına eklemek:
Alıntı YapSection "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
Bu şekilde..Mesela ben bu örnekte 1280x1024 ekledim. Sen de ekran kartın+monitörün en fazla kaç destekliyorsa o değerleri eklemelisin.
abicim biryerde hata mı yaptım? dediğini yaptım, bilgisayarımı yeniden başlattım demin çözünürlük 1024x768 di şimdi 800x600oldu. 1280x1024 >tercihler>ekran çözünürlüğünde de yok . acaba kopyalarken bir hata mı yaptım. xorg.confu yolluyorum
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Option "AddARGBGLXVisuals" "True"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "UseFBDev" "true"
Option "NoLogo" "True"
Driver "nvidia"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "tr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Alıntı YapSection "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Option "AddARGBGLXVisuals" "True"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1280x1024@60" "1024x768@75" "800x600@75" "800x600@75" "640x480@75"
EndSubSection
EndSection
EndSubSection yazarak SubSection kısmını kapamamışsın ki. Aynen bu şekilde yap. Ayrıca monitör kaç inch (15,17,19)?
17''
Tamam o zaman, verdiğim değerler uygun. Ayrıca xorg.confu değiştirip kaydettikten sonra X'i yeniden başlatman gerek, ctr+alt+backspace kombinasyonuyla.
yaptım, x'i yeniden başlattım. şu an çözünürlüğüm 1024x768 ama yine >sistem>Tercihler> Ekran çözünürlük ü açtığımda 1280x1024 yine yok. :-[
Alıntı YapSection "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Option "AddARGBGLXVisuals" "True"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "800x600" "640x480"
EndSubSection
EndSection
Şeklinde bir daha dene. Sebebini anlayamadım.
çok sağol abi. bu sefer oldu. :) ama bişey sormak istiyorum demin neden olmadı ???
"1280x1024@75" gibi yenilenme hızı değeri eklemekten dolayı olmuş olabilir, ufak bir yazım hatasından olablir, kısacası sebebi çok. Çünkü xorg.conf dosyası en ufak bir hatada yazılan değeri okumaz ya da X'in başlamasına engel olur. Dikkatli düzenlemek gerek, X açılmazsa komut satırından sudo nano /etc/X11/xorg.conf
ile nano düzenleyecisiyle düzenlenebilir.
çok sağol :)