[Nasıl] BURG Kullanarak Temalı Önyükleme Ekranı Oluşturma (Quantal - Güncel)

Başlatan alquirel, 11 Haziran 2010 - 09:33:42

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa 1 ... 9 10 11
Kullanıcı Eylemleri

araknafobia

#225
13 Şubat 2013 - 15:38:52
@if
Az önce yaptım dediklerinizi, yine olmadı.
Ancak şunu fark ettim onu belirteyim ben laptop ve bir de ekran ile kullanıyorum sistemimi.Bu gün okula götürdüm açtım tema düzgün bir şekilde göründü.
Eve geldim ekranı bağladım yine bozuldu.Bende ekran kablosunu çıkardım düzeldi.
Ekranım bağlı iken temalar bozuk oluyor.Bu düzeltilecebilecek bir durum mudur?
Bu arada ek bilgi olarak ekranımı direk (ismini bilmiyorum tanımlayacağım) klasik masaüstü bilgisayarların ekranını bağlar gibi bağladım.HMDI felan değil yani...
Kablo resmi:
Kod Seç
http://images.gittigidiyor.com/4844/SLINE-VGA-MONITOR-BAGLANTI-KABLOSU-10m__48446614_0.jpg

if

#226
13 Şubat 2013 - 17:35:43
@araknafobia, pek bir şey bulamadım şimdilik. Harici ekranı bağlama şekliyle alâkalı değildir sanırım. Harici ekranın çözünürlüğü nedir?

araknafobia

#227
13 Şubat 2013 - 21:15:54
@if,
Monitör çözünürlüğü :1600x900
Sadece laptop olarak sorun yok zaten düzgün çalışıyor.Ekran işin içine girince sapıtıyor.
İlginç bir hata yazılımsal değil heralde ama ne olabilir bende çözemedim...Yine de ilginiz için teşekkürler...

if

#228
13 Şubat 2013 - 21:25:02
Kod Seç
GRUB_GFXMODE=1600x900 olarak değiştirelim.

hadon

#229
13 Şubat 2013 - 21:40:55
İf merhaba.

Araya giriyorum ama kısa bir sorum var; bunu Debian üzerinde yapabilir miyim?
:)  :)  :)

if

#230
13 Şubat 2013 - 21:54:55
Merhaba @hadon. Ubuntu'ya kurulabiliniyorsa Debian'a da kurulabilinir diye düşünüyorum. Depo varsa eklenebilir, yoksa sitesinde nasıl derleneceği anlatılıyor. Belki Ubuntu için olan depo bile kullanılabiliniyordur.

hadon

#231
13 Şubat 2013 - 22:01:55
Teşekkür ediyorum. Boş bir zamanımda biraz araştırayım.

İyi akşamlar.
:)  :)  :)

if

#232
13 Şubat 2013 - 22:07:07
Rica ederim, iyi akşamlar.

tlg

#233
18 Şubat 2013 - 13:40:42
Çözünürlüğü ayarlayablir miyiz? Şuan bende en yüksek, 1024*768 görünüyor.

araknafobia

#234
18 Şubat 2013 - 18:12:11
@if,
Kod Seç
GRUB_GFXMODE=1600x900
Bu da işe yaramadı...

if

#235
18 Şubat 2013 - 19:29:51
@araknafobia,
Kod Seç
cat /var/log/Xorg.0.log > xorg.log
dmesg > dmesg.log komutları ardından ev dizininde iki adet .log uzantılı dosya oluşacak. Onların içeriğini buraya geçin.

araknafobia

#236
22 Şubat 2013 - 16:25:50
@if;
dmesg.log
Kod Seç
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-23-generic (buildd@aatxe) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #35-Ubuntu SMP Thu Jan 24 13:05:29 UTC 2013 (Ubuntu 3.5.0-23.35-generic 3.5.7.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac8efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bac8f000-0x00000000bae26fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae27000-0x00000000bae2efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae2f000-0x00000000bae50fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae51000-0x00000000bae70fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae71000-0x00000000baf1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baf1f000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: LENOVO HuronRiver Platform/Emerald Lake, BIOS 45CN34WW 05/12/2011
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1bfe00 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 180000000 mask FC0000000 write-back
[    0.000000]   7 base 1BFE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36bfe000-0x37feffff]
[    0.000000] Allocated new RAMDISK: [mem 0x3580c000-0x36bfd9a9]
[    0.000000] Move RAMDISK from [mem 0x36bfe000-0x37fef9a9] to [mem 0x3580c000-0x36bfd9a9]
[    0.000000] ACPI: RSDP 000f0110 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT baffe120 0008C (v01 LENOVO CB-01    00000001 LENO 00000001)
[    0.000000] ACPI: FACP bafee000 000F4 (v03 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: DSDT baff1000 09B3E (v02 LENOVO  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS baf3e000 00040
[    0.000000] ACPI: SLIC baffd000 00176 (v01 LENOVO CB-01    00000001 LENO 00000001)
[    0.000000] ACPI: SSDT baffb000 01068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! baff0000 000A5 (v32 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: HPET bafed000 00038 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: APIC bafec000 00098 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: MCFG bafeb000 0003C (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: SSDT bafea000 00954 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT bafe9000 007C2 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT bafe8000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI bafe7000 0003E (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: UEFI bafe6000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI bafe5000 00242 (v01 LENOVO CB-01    00000001 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 6274MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0xbfdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xbac8efff]
[    0.000000]   node   0: [mem 0xbafff000-0xbaffffff]
[    0.000000]   node   0: [mem 0x00000000-0xbfdfffff]
[    0.000000] On node 0 totalpages: 1550877
[    0.000000] free_area_init_node: node 0, pgdat c18a4900, node_mem_map f200c200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 12549 pages used for memmap
[    0.000000]   HighMem zone: 1310093 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7b7a000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1536544
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=d5e5b950-da74-45e1-a8c8-2337c3294927 ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 14675840 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:001bfe00)
[    0.000000] Memory: 6099456k/7337984k available (5965k kernel code, 104052k reserved, 2936k data, 756k init, 5290568k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18b2000 - 0xc196f000   ( 756 kB)
[    0.000000]       .data : 0xc15d3464 - 0xc18b17c0   (2936 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d3464   (5965 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f1c0a000 soft=f1c0c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2394.633 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.26 BogoMIPS (lpj=9578532)
[    0.000074] pid_max: default: 32768 minimum: 301
[    0.000132] Security Framework initialized
[    0.000177] AppArmor: AppArmor initialized
[    0.000211] Yama: becoming mindful.
[    0.000281] Mount-cache hash table entries: 512
[    0.000502] Initializing cgroup subsys cpuacct
[    0.000538] Initializing cgroup subsys memory
[    0.000579] Initializing cgroup subsys devices
[    0.000614] Initializing cgroup subsys freezer
[    0.000649] Initializing cgroup subsys blkio
[    0.000683] Initializing cgroup subsys perf_event
[    0.000743] Disabled fast string operations
[    0.000778] CPU: Physical Processor ID: 0
[    0.000812] CPU: Processor Core ID: 0
[    0.000848] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.000848] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000909] mce: CPU supports 7 MCE banks
[    0.000952] CPU0: Thermal monitoring enabled (TM1)
[    0.000993] using mwait in idle threads.
[    0.003232] ACPI: Core revision 20120320
[    0.009817] ftrace: allocating 24607 entries in 49 pages
[    0.021676] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.022113] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061774] CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz stepping 07
[    0.168053] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.168173] PEBS disabled due to CPU errata.
[    0.168208] ... version:                3
[    0.168242] ... bit width:              48
[    0.168276] ... generic registers:      4
[    0.168310] ... value mask:             0000ffffffffffff
[    0.168346] ... max period:             000000007fffffff
[    0.168382] ... fixed-purpose events:   3
[    0.168415] ... event mask:             000000070000000f
[    0.168636] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.168773] CPU 1 irqstacks, hard=f1d54000 soft=f1d56000
[    0.179063] Initializing CPU#1
[    0.179830] Disabled fast string operations
[    0.168775] Booting Node   0, Processors  #1
[    0.182017] CPU 2 irqstacks, hard=f1d90000 soft=f1d92000
[    0.192366] Initializing CPU#2
[    0.193146] Disabled fast string operations
[    0.182113]  #2
[    0.195316] CPU 3 irqstacks, hard=f1d9c000 soft=f1d9e000
[    0.205664] Initializing CPU#3
[    0.206444] Disabled fast string operations
[    0.195412]  #3
[    0.208582] Brought up 4 CPUs
[    0.209252] Total of 4 processors activated (19157.06 BogoMIPS).
[    0.212782] devtmpfs: initialized
[    0.212958] EVM: security.selinux
[    0.212991] EVM: security.SMACK64
[    0.213024] EVM: security.capability
[    0.213101] PM: Registering ACPI NVS region [mem 0xbae27000-0xbae2efff] (32768 bytes)
[    0.213154] PM: Registering ACPI NVS region [mem 0xbae51000-0xbae70fff] (131072 bytes)
[    0.213209] PM: Registering ACPI NVS region [mem 0xbaf1f000-0xbaf9efff] (524288 bytes)
[    0.214067] dummy:
[    0.214129] RTC time: 16:18:18, date: 02/22/13
[    0.214199] NET: Registered protocol family 16
[    0.214311] Trying to unpack rootfs image as initramfs...
[    0.214354] EISA bus registered
[    0.214437] ACPI: bus type pci registered
[    0.214532] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.214587] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.214625] PCI: Using MMCONFIG for extended config space
[    0.214661] PCI: Using configuration type 1 for base access
[    0.215803] bio: create slab <bio-0> at 0
[    0.215923] ACPI: Added _OSI(Module Device)
[    0.215958] ACPI: Added _OSI(Processor Device)
[    0.215997] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.216033] ACPI: Added _OSI(Processor Aggregator Device)
[    0.217812] ACPI: EC: Look up EC in DSDT
[    0.219583] ACPI: Executed 1 blocks of module-level executable AML code
[    0.256004] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.256389] ACPI: SSDT baf0f718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.256920] ACPI: Dynamic OEM Table Load:
[    0.256986] ACPI: SSDT   (null) 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.260129] ACPI: SSDT baf10a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.260688] ACPI: Dynamic OEM Table Load:
[    0.260754] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.279986] ACPI: SSDT bae4fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.280515] ACPI: Dynamic OEM Table Load:
[    0.280581] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.318107] ACPI: Interpreter enabled
[    0.318149] ACPI: (supports S0 S1 S3 S4 S5)
[    0.318283] ACPI: Using IOAPIC for interrupt routing
[    0.323930] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.324146] ACPI: No dock devices found.
[    0.324183] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.324555] \_SB_.PCI0:_OSC invalid UUID
[    0.324556] _OSC request data:1 8 1f
[    0.324561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.325106] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.325145] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.325185] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.325237] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[    0.325288] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.325367] PCI host bridge to bus 0000:00
[    0.325402] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.325441] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.325479] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.325519] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    0.325558] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.325605] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.325645] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.325678] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.325699] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.325711] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.325717] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.325722] pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
[    0.325780] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.325805] pci 0000:00:16.0: reg 10: [mem 0xf1a05000-0xf1a0500f 64bit]
[    0.325883] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.325920] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.325943] pci 0000:00:1a.0: reg 10: [mem 0xf1a09000-0xf1a093ff]
[    0.326037] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.326067] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.326084] pci 0000:00:1b.0: reg 10: [mem 0xf1a00000-0xf1a03fff 64bit]
[    0.326156] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.326182] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.326265] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.326294] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.326377] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.326406] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.326489] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.326524] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.326547] pci 0000:00:1d.0: reg 10: [mem 0xf1a08000-0xf1a083ff]
[    0.326641] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.326670] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.326798] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[    0.326815] pci 0000:00:1f.2: reg 10: [io  0x40b8-0x40bf]
[    0.326824] pci 0000:00:1f.2: reg 14: [io  0x40cc-0x40cf]
[    0.326832] pci 0000:00:1f.2: reg 18: [io  0x40b0-0x40b7]
[    0.326841] pci 0000:00:1f.2: reg 1c: [io  0x40c8-0x40cb]
[    0.326849] pci 0000:00:1f.2: reg 20: [io  0x4090-0x409f]
[    0.326858] pci 0000:00:1f.2: reg 24: [io  0x4080-0x408f]
[    0.326909] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.326926] pci 0000:00:1f.3: reg 10: [mem 0xf1a04000-0xf1a040ff 64bit]
[    0.326947] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.326986] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[    0.327003] pci 0000:00:1f.5: reg 10: [io  0x40a8-0x40af]
[    0.327011] pci 0000:00:1f.5: reg 14: [io  0x40c4-0x40c7]
[    0.327020] pci 0000:00:1f.5: reg 18: [io  0x40a0-0x40a7]
[    0.327028] pci 0000:00:1f.5: reg 1c: [io  0x40c0-0x40c3]
[    0.327037] pci 0000:00:1f.5: reg 20: [io  0x4070-0x407f]
[    0.327045] pci 0000:00:1f.5: reg 24: [io  0x4060-0x406f]
[    0.327122] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
[    0.327132] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[    0.327142] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.327153] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.327160] pci 0000:01:00.0: reg 24: [io  0x3000-0x307f]
[    0.327168] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    0.327225] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.327235] pci 0000:01:00.1: reg 10: [mem 0xf1000000-0xf1003fff]
[    0.331814] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.331853] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.331856] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.331860] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.331907] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.332036] pci 0000:03:00.0: [8086:0084] type 00 class 0x028000
[    0.332082] pci 0000:03:00.0: reg 10: [mem 0xf1900000-0xf1901fff 64bit]
[    0.332305] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.339814] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.339857] pci 0000:00:1c.1:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.339992] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000
[    0.340061] pci 0000:04:00.0: reg 10: [io  0x2000-0x20ff]
[    0.340182] pci 0000:04:00.0: reg 18: [mem 0xf1804000-0xf1804fff 64bit pref]
[    0.340257] pci 0000:04:00.0: reg 20: [mem 0xf1800000-0xf1803fff 64bit pref]
[    0.340592] pci 0000:04:00.0: supports D1 D2
[    0.340594] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.347830] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.347871] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.347880] pci 0000:00:1c.3:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.347900] pci_bus 0000:00: on NUMA node 0
[    0.347905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.348055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.348089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.348124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.348173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.348253] \_SB_.PCI0:_OSC invalid UUID
[    0.348254] _OSC request data:1 1f 1f
[    0.348258]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.348324] \_SB_.PCI0:_OSC invalid UUID
[    0.348325] _OSC request data:1 0 1d
[    0.348329]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.348380] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.351528] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.351803] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.352071] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.352338] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.352605] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.352917] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.353228] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.353495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.353813] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.353871] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.353924] vgaarb: loaded
[    0.353956] vgaarb: bridge control possible 0000:01:00.0
[    0.353992] vgaarb: no bridge control possible 0000:00:02.0
[    0.354228] SCSI subsystem initialized
[    0.354308] libata version 3.00 loaded.
[    0.354331] ACPI: bus type usb registered
[    0.354384] usbcore: registered new interface driver usbfs
[    0.354429] usbcore: registered new interface driver hub
[    0.354489] usbcore: registered new device driver usb
[    0.354612] PCI: Using ACPI for IRQ routing
[    0.356207] PCI: pci_cache_line_size set to 64 bytes
[    0.356290] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.356291] e820: reserve RAM buffer [mem 0xbac8f000-0xbbffffff]
[    0.356294] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.356296] e820: reserve RAM buffer [mem 0x1bfe00000-0x1bfffffff]
[    0.356382] NetLabel: Initializing
[    0.356416] NetLabel:  domain hash size = 128
[    0.356450] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.356493] NetLabel:  unlabeled traffic allowed by default
[    0.356598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.356779] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.358827] Switching to clocksource hpet
[    0.364719] AppArmor: AppArmor Filesystem Enabled
[    0.364777] pnp: PnP ACPI init
[    0.364821] ACPI: bus type pnp registered
[    0.365165] pnp 00:00: [bus 00-3e]
[    0.365168] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.365170] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.365172] pnp 00:00: [io  0x0d00-0xffff window]
[    0.365173] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.365175] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.365177] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.365179] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.365180] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.365182] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.365184] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.365185] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.365187] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.365188] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.365190] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.365192] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.365193] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.365195] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.365197] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[    0.365198] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.365256] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.365269] pnp 00:01: [io  0x0000-0x001f]
[    0.365270] pnp 00:01: [io  0x0081-0x0091]
[    0.365272] pnp 00:01: [io  0x0093-0x009f]
[    0.365273] pnp 00:01: [io  0x00c0-0x00df]
[    0.365275] pnp 00:01: [dma 4]
[    0.365296] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.365303] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.365322] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.365385] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.365405] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.365414] pnp 00:04: [io  0x00f0]
[    0.365422] pnp 00:04: [irq 13]
[    0.365442] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.365452] pnp 00:05: [io  0x002e-0x002f]
[    0.365454] pnp 00:05: [io  0x004e-0x004f]
[    0.365456] pnp 00:05: [io  0x0061]
[    0.365458] pnp 00:05: [io  0x0063]
[    0.365459] pnp 00:05: [io  0x0065]
[    0.365461] pnp 00:05: [io  0x0067]
[    0.365462] pnp 00:05: [io  0x0070]
[    0.365464] pnp 00:05: [io  0x0080]
[    0.365465] pnp 00:05: [io  0x0092]
[    0.365466] pnp 00:05: [io  0x00b2-0x00b3]
[    0.365468] pnp 00:05: [io  0x1000-0x100f]
[    0.365470] pnp 00:05: [io  0xffff]
[    0.365471] pnp 00:05: [io  0xffff]
[    0.365473] pnp 00:05: [io  0x0400-0x0453]
[    0.365474] pnp 00:05: [io  0x0458-0x047f]
[    0.365476] pnp 00:05: [io  0x0500-0x057f]
[    0.365477] pnp 00:05: [io  0x0068-0x006f]
[    0.365479] pnp 00:05: [mem 0xfe800000-0xfe80ffff]
[    0.365522] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.365561] system 00:05: [io  0xffff] has been reserved
[    0.365598] system 00:05: [io  0xffff] has been reserved
[    0.365636] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.365674] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.365712] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.365751] system 00:05: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.365790] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365798] pnp 00:06: [io  0x0070-0x0077]
[    0.365802] pnp 00:06: [irq 8]
[    0.365823] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.365849] pnp 00:07: [io  0x0454-0x0457]
[    0.365885] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.365923] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.365976] pnp 00:08: [io  0x0060]
[    0.365978] pnp 00:08: [io  0x0064]
[    0.365983] pnp 00:08: [irq 1]
[    0.366004] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.366015] pnp 00:09: [irq 12]
[    0.366039] pnp 00:09: Plug and Play ACPI device, IDs SYN0326 SYN0300 SYN0002 PNP0f13 (active)
[    0.366132] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.366133] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    0.366135] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    0.366136] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    0.366138] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[    0.366140] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.366141] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    0.366143] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    0.366144] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    0.366146] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    0.366147] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
[    0.366184] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.366224] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.366264] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.366303] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.366343] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.366381] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.366421] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.366459] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.366499] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[    0.366539] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.366579] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.366619] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.366819] pnp 00:0b: [mem 0x20000000-0x201fffff]
[    0.366821] pnp 00:0b: [mem 0x40000000-0x401fffff]
[    0.366872] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[    0.366912] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[    0.366964] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.366986] pnp: PnP ACPI: found 12 devices
[    0.367021] ACPI: ACPI bus type pnp unregistered
[    0.367056] PnPBIOS: Disabled by ACPI PNP
[    0.403517] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.403618] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1080000-0xf10fffff pref]
[    0.403671] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.403708] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.403747] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.403788] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.403842] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.403888] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.403929] pci 0000:00:1c.1:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.403975] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.404014] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.404058] pci 0000:00:1c.3:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.404152] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.404154] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.404156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.404158] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.404160] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.404161] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.404163] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[    0.404165] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.404167] pci_bus 0000:03: resource 1 [mem 0xf1900000-0xf19fffff]
[    0.404169] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.404171] pci_bus 0000:04: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.404202] NET: Registered protocol family 2
[    0.404295] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.404470] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.404709] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.404836] TCP: Hash tables configured (established 131072 bind 65536)
[    0.404875] TCP: reno registered
[    0.404908] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.404949] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.405034] NET: Registered protocol family 1
[    0.405082] pci 0000:00:02.0: Boot video device
[    0.405190] PCI: CLS 64 bytes, default 64
[    0.405661] audit: initializing netlink socket (disabled)
[    0.405707] type=2000 audit(1361549898.292:1): initialized
[    0.426774] highmem bounce pool size: 64 pages
[    0.426818] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.428749] VFS: Disk quotas dquot_6.5.2
[    0.428824] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.429305] fuse init (API version 7.19)
[    0.429410] msgmni has been set to 1579
[    0.429786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.429862] io scheduler noop registered
[    0.429898] io scheduler deadline registered (default)
[    0.429938] io scheduler cfq registered
[    0.430079] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.430267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.430323] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.430415] intel_idle: MWAIT substates: 0x21120
[    0.430416] intel_idle: v0.4 model 0x2A
[    0.430417] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.574002] Freeing initrd memory: 20424k freed
[    0.598848] ACPI: AC Adapter [ADP1] (off-line)
[    0.599026] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.599103] ACPI: Lid Switch [LID0]
[    0.599168] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.599223] ACPI: Sleep Button [SLPB]
[    0.599834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.599886] ACPI: Power Button [PWRF]
[    0.599986] ACPI: Requesting acpi_cpufreq
[    0.605582] thermal LNXTHERM:00: registered as thermal_zone0
[    0.605621] ACPI: Thermal Zone [TZS0] (38 C)
[    0.605779] thermal LNXTHERM:01: registered as thermal_zone1
[    0.605816] ACPI: Thermal Zone [TZS1] (18 C)
[    0.605866] ACPI: Battery Slot [BAT0] (battery present)
[    0.605931] GHES: HEST is not enabled!
[    0.606034] isapnp: Scanning for PnP cards...
[    0.606049] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.606768] ACPI: Battery Slot [BAT0] (battery present)
[    0.607376] Linux agpgart interface v0.103
[    0.608692] brd: module loaded
[    0.609380] loop: module loaded
[    0.609531] ata_piix 0000:00:1f.2: version 2.13
[    0.609546] ata_piix 0000:00:1f.2: MAP [
[    0.609581]  P0 P2 P1 P3 ]
[    0.762400] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.762627] scsi0 : ata_piix
[    0.762722] scsi1 : ata_piix
[    0.762793] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
[    0.762835] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
[    0.762892] ata_piix 0000:00:1f.5: MAP [
[    0.762949]  P0 -- P1 -- ]
[    0.763073] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.763228] scsi2 : ata_piix
[    0.763315] scsi3 : ata_piix
[    0.763381] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19
[    0.763423] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19
[    0.763783] Fixed MDIO Bus: probed
[    0.763863] tun: Universal TUN/TAP device driver, 1.6
[    0.763898] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.763982] PPP generic driver version 2.4.2
[    0.764062] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.764129] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.764132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.764172] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.764249] ehci_hcd 0000:00:1a.0: debug port 2
[    0.768160] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.768173] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1a09000
[    0.778357] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.778416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.778455] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.778507] usb usb1: Product: EHCI Host Controller
[    0.778542] usb usb1: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[    0.778581] usb usb1: SerialNumber: 0000:00:1a.0
[    0.778730] hub 1-0:1.0: USB hub found
[    0.778767] hub 1-0:1.0: 2 ports detected
[    0.778861] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.778864] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.778903] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.778976] ehci_hcd 0000:00:1d.0: debug port 2
[    0.782879] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.782893] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1a08000
[    0.794332] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.794386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.794425] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.794477] usb usb2: Product: EHCI Host Controller
[    0.794513] usb usb2: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[    0.794551] usb usb2: SerialNumber: 0000:00:1d.0
[    0.794697] hub 2-0:1.0: USB hub found
[    0.794733] hub 2-0:1.0: 2 ports detected
[    0.794815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.794869] uhci_hcd: USB Universal Host Controller Interface driver
[    0.794951] usbcore: registered new interface driver libusual
[    0.795025] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.797304] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.797343] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.797479] mousedev: PS/2 mouse device common for all mice
[    0.797660] rtc_cmos 00:06: RTC can wake from S4
[    0.797814] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.797878] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.797957] device-mapper: uevent: version 1.0.3
[    0.798050] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.798126] EISA: Probing bus 0 at eisa.0
[    0.798160] EISA: Cannot allocate resource for mainboard
[    0.798197] Cannot allocate resource for EISA slot 1
[    0.798233] Cannot allocate resource for EISA slot 2
[    0.798270] Cannot allocate resource for EISA slot 3
[    0.798306] Cannot allocate resource for EISA slot 4
[    0.798374] Cannot allocate resource for EISA slot 5
[    0.798409] Cannot allocate resource for EISA slot 6
[    0.798445] Cannot allocate resource for EISA slot 7
[    0.798481] Cannot allocate resource for EISA slot 8
[    0.798518] EISA: Detected 0 cards.
[    0.798628] cpuidle: using governor ladder
[    0.798762] cpuidle: using governor menu
[    0.798796] EFI Variables Facility v0.08 2004-May-17
[    0.798996] ashmem: initialized
[    0.799144] TCP: cubic registered
[    0.799261] NET: Registered protocol family 10
[    0.799462] NET: Registered protocol family 17
[    0.799504] Key type dns_resolver registered
[    0.799576] Using IPI No-Shortcut mode
[    0.799699] PM: Hibernation image not present or could not be loaded.
[    0.799708] registered taskstats version 1
[    0.801765] Key type trusted registered
[    0.803682] Key type encrypted registered
[    0.805663]   Magic number: 1:596:338
[    0.805711] thermal thermal_zone1: hash matches
[    0.805753] tty tty59: hash matches
[    0.805841] rtc_cmos 00:06: setting system clock to 2013-02-22 16:18:19 UTC (1361549899)
[    0.806426] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.806463] EDD information not available.
[    0.811806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.959608] isapnp: No Plug & Play device found
[    1.089911] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.093469] ata4: SATA link down (SStatus 0 SControl 300)
[    1.222273] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.222342] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.222729] hub 1-1:1.0: USB hub found
[    1.222887] hub 1-1:1.0: 6 ports detected
[    1.237816] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.261923] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B1AS, 8.20, max UDMA/100
[    1.293894] ata3.00: configured for UDMA/100
[    1.333641] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.401518] Refined TSC clocksource calibration: 2394.556 MHz.
[    1.401594] Switching to clocksource tsc
[    1.465996] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.466069] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.466499] hub 2-1:1.0: USB hub found
[    1.466642] hub 2-1:1.0: 6 ports detected
[    1.537394] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[    1.632668] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52f
[    1.632755] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.632803] usb 1-1.3: Product: USB Receiver
[    1.632835] usb 1-1.3: Manufacturer: Logitech
[    1.705325] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
[    1.788944] ata2.00: failed to resume link (SControl 0)
[    1.929472] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=58ea
[    1.929560] usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.929607] usb 1-1.5: Product: Lenovo easy camera
[    1.929641] usb 1-1.5: Manufacturer: 5618006211B754SV
[    1.929674] usb 1-1.5: SerialNumber: 200901010001
[    2.000864] usb 2-1.4: new full-speed USB device number 3 using ehci_hcd
[    2.097351] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e00d
[    2.097439] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.097487] usb 2-1.4: Product: Broadcom Bluetooth 2.1 Device
[    2.097521] usb 2-1.4: Manufacturer: Broadcom Corp
[    2.097555] usb 2-1.4: SerialNumber: 3859F9F6CE0A
[    2.119771] ata2.00: SATA link down (SStatus 4 SControl 0)
[    2.119822] ata2.01: SATA link down (SStatus 0 SControl 300)
[    2.119877] ata1.01: failed to resume link (SControl 0)
[    2.172561] usb 2-1.6: new high-speed USB device number 4 using ehci_hcd
[    2.265287] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0139
[    2.265341] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.265389] usb 2-1.6: Product: USB2.0-CRW
[    2.265421] usb 2-1.6: Manufacturer: Generic
[    2.265453] usb 2-1.6: SerialNumber: 20100201396000000
[    2.272265] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.272312] ata1.01: SATA link down (SStatus 4 SControl 0)
[    2.280721] ata1.00: ATA-8: WDC WD7500BPVT-24HXZT1, 02.01A02, max UDMA/133
[    2.280801] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.296706] ata1.00: configured for UDMA/133
[    2.297011] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-2 02.0 PQ: 0 ANSI: 5
[    2.297169] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.297215] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.297270] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.297357] sd 0:0:0:0: [sda] Write Protect is off
[    2.297393] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.297404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.367513]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[    2.368374] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.378226] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B1AS  8.20 PQ: 0 ANSI: 5
[    2.393873] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.393948] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.394147] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.394330] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.394695] Freeing unused kernel memory: 756k freed
[    2.394941] Write protecting the kernel text: 5968k
[    2.395017] Write protecting the kernel read-only data: 2428k
[    2.395596] NX-protecting the kernel data: 4272k
[    2.408683] udevd[111]: starting version 175
[    2.432986] wmi: Mapper loaded
[    2.433611] [drm] Initialized drm 1.1.0 20060810
[    2.439119] i915 0000:00:02.0: setting latency timer to 64
[    2.439561] pci 0000:00:00.0: Intel Sandybridge Chipset
[    2.439786] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.440667] pci 0000:00:00.0: detected 65536K stolen memory
[    2.441085] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.441095] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.441138] [drm] Driver supports precise vblank timestamp query.
[    2.441310] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.441368] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    2.443626] usbcore: registered new interface driver usbhid
[    2.443667] usbhid: USB HID core driver
[    2.447400] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.447558] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
[    2.447757] r8169 0000:04:00.0: eth0: RTL8105e at 0xf8430000, f0:de:f1:6d:2d:03, XID 00a00000 IRQ 42
[    2.451560] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    2.451649] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    2.451691] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    2.451731] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[    2.477738] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
[    2.477898] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input0
[    2.479134] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input5
[    2.479878] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1
[    2.647772] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.947634] fbcon: inteldrmfb (fb0) is primary device
[    3.296707] Console: switching to colour frame buffer device 170x48
[    3.299560] fb0: inteldrmfb frame buffer device
[    3.299581] drm: registered panic notifier
[    3.301943] ACPI Error: Current brightness invalid (20120320/video-384)
[    3.302041] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.302112] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input6
[    3.306029] ACPI Error: Current brightness invalid (20120320/video-384)
[    3.306168] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.306227] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    3.306319] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.307299] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1a00a1)
[    3.309336] vga_switcheroo: enabled
[    3.309362] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    3.319120] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    3.319169] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[    3.319272] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    3.319304] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[    3.410606] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    3.410636] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[    3.410661] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    3.410683] [drm] nouveau 0000:01:00.0: Bios version 70.08.51.00
[    3.410710] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    3.410948] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    3.410978] [drm] nouveau 0000:01:00.0: DCB version 4.0
[    3.412007] [drm] nouveau 0000:01:00.0: DCB outp 00: 02001300 00000000
[    3.413024] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[    3.414023] [drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[    3.415007] [drm] nouveau 0000:01:00.0: DCB conn 02: 00002261
[    3.415987] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[    3.416964] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD5D7
[    3.439104] [drm] nouveau 0000:01:00.0: 0xD581: i2c wr fail: -6
[    3.480165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDC26
[    3.507885] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE2C
[    3.508776] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE30
[    3.509690] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEF18
[    3.510541] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEF7D
[    3.534343] [TTM] Zone  kernel: Available graphics memory: 415034 kiB
[    3.535227] [TTM] Zone highmem: Available graphics memory: 3060318 kiB
[    3.536076] [TTM] Initializing pool allocator
[    3.536916] [TTM] Initializing DMA pool allocator
[    3.537741] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
[    3.540457] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    3.545728] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.546542] [drm] No driver support for vblank timestamp query.
[    3.547344] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[    3.553463] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    3.554266] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
[    3.555077] [drm] nouveau 0000:01:00.0: 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[    3.555882] [drm] nouveau 0000:01:00.0: 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV
[    3.556686] [drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 324MHz voltage 980mV
[    3.561610] [drm] nouveau 0000:01:00.0: MM: using COPY1 for buffer copies
[    3.632923] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x120000, bo f651d200
[    3.633819] fb1: nouveaufb frame buffer device
[    3.634615] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
[    3.904580] uvesafb: Intel Corporation, Intel(R)Sandybridge Mobile Graphics Controller, Hardware Version 0.0, OEM: Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS, VBE v3.0
[    3.926325] uvesafb: NX protection is actively.We have better not to use the PMI.
[    4.091688] uvesafb: VBIOS/hardware supports DDC2 transfers
[    4.104765] uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz
[    4.104958] uvesafb: scrolling: redraw
[    4.107813] uvesafb: framebuffer at 0xe0000000, mapped to 0xfc200000, using 21600k, total 65472k
[    4.107860] fb2: VESA VGA frame buffer device
[    4.118511] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    4.118540] EXT4-fs (sda6): write access will be enabled during recovery
[    5.518409] EXT4-fs (sda6): recovery complete
[    5.533917] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.478721] Adding 6197244k swap on /dev/sda7.  Priority:-1 extents:1 across:6197244k
[   16.482878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.544301] udevd[411]: starting version 175
[   16.610218] mei 0000:00:16.0: setting latency timer to 64
[   16.610283] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[   16.618720] Linux video capture interface: v2.00
[   16.619104] Bluetooth: Core ver 2.16
[   16.619508] NET: Registered protocol family 31
[   16.619510] Bluetooth: HCI device and connection manager initialized
[   16.619512] Bluetooth: HCI socket layer initialized
[   16.619514] Bluetooth: L2CAP socket layer initialized
[   16.619519] Bluetooth: SCO socket layer initialized
[   16.619836] lp: driver loaded but no devices found
[   16.620608] uvcvideo: Found UVC 1.00 device Lenovo easy camera (0bda:58ea)
[   16.622469] cfg80211: Calling CRDA to update world regulatory domain
[   16.623193] usbcore: registered new interface driver btusb
[   16.624146] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   16.624154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.624156] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   16.624160] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   16.624164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.624167] ACPI Warning: 0x00000500-0x0000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   16.624172] ACPI Warning: 0x00000500-0x0000057f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[   16.624176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.624177] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.627391] input: Lenovo easy camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8
[   16.627473] usbcore: registered new interface driver uvcvideo
[   16.627474] USB Video Class driver (1.1.1)
[   16.629309] mei 0000:00:16.0: wd: failed to find the client
[   16.631174] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   16.631812] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   16.631815] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[   16.631915] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[   16.631917] iwlwifi 0000:03:00.0: pci_resource_base = f8468000
[   16.631919] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
[   16.632005] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
[   16.638192] scsi4 : SCSI emulation for RTS5139 USB card reader
[   16.639617] type=1400 audit(1361542715.354:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
[   16.640030] type=1400 audit(1361542715.354:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
[   16.640269] type=1400 audit(1361542715.354:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
[   16.640521] scsi 4:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   16.640526] usbcore: registered new interface driver rts5139
[   16.643171] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   16.644023] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   16.675509] input: Ideapad extra buttons as /devices/platform/ideapad/input/input9
[   16.690633] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[   16.691264] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   16.751960] acer_wmi: Acer Laptop ACPI-WMI Extras
[   16.759845] cfg80211: World regulatory domain updated:
[   16.759848] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.759850] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.759852] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.759854] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.759856] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.759858] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.774757] acer_wmi: Brightness must be controlled by acpi video driver
[   16.775013] input: Acer BMA150 accelerometer as /devices/virtual/input/input10
[   16.799013] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[   16.799715] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138
[   16.799882] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   16.799885] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   16.799886] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   16.799888] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   16.799890] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[   16.799892] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   16.799951] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   16.800475] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[   16.803202] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[   16.805688] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   16.813834] kvm: disabled by bios
[   16.819591] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6
[   16.819594] iwlwifi 0000:03:00.0: Device SKU: 0x50
[   16.819596] iwlwifi 0000:03:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[   16.819606] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   16.819681] Registered led device: phy0-led
[   16.819710] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   16.821881] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   16.892874] kvm: disabled by bios
[   16.895345] kvm: disabled by bios
[   16.995867] kvm: disabled by bios
[   17.247384] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.247449] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.247494] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   17.247824] hda_intel: Disabling MSI
[   17.247832] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   17.275722] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[   17.308251] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[   17.625644] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   17.979103] init: failsafe main process (912) killed by TERM signal
[   18.132660] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   18.132755] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   18.132830] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   18.132904] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   18.180681] type=1400 audit(1361542716.898:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=982 comm="apparmor_parser"
[   18.181020] type=1400 audit(1361542716.898:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=982 comm="apparmor_parser"
[   18.181102] type=1400 audit(1361542716.898:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=981 comm="apparmor_parser"
[   18.181166] type=1400 audit(1361542716.898:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=983 comm="apparmor_parser"
[   18.181464] type=1400 audit(1361542716.898:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=981 comm="apparmor_parser"
[   18.181526] type=1400 audit(1361542716.898:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=983 comm="apparmor_parser"
[   18.182591] type=1400 audit(1361542716.898:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=984 comm="apparmor_parser"
[   18.249664] ppdev: user-space parallel port driver
[   18.264638] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.264641] Bluetooth: BNEP filters: protocol multicast
[   18.266514] Bluetooth: RFCOMM TTY layer initialized
[   18.266517] Bluetooth: RFCOMM socket layer initialized
[   18.266519] Bluetooth: RFCOMM ver 1.11
[   18.804000] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   18.863697] init: anacron main process (1113) killed by TERM signal
[   18.866362] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   18.926558] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.936552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.141876] r8169 0000:04:00.0: eth0: link down
[   19.142007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.142401] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.369759] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[   19.580564] [drm] nouveau 0000:01:00.0: 906e not supported yet
[   19.951604] wlan0: authenticate with 64:70:02:d3:ed:04
[   19.961245] wlan0: send auth to 64:70:02:d3:ed:04 (try 1/3)
[   19.963431] wlan0: authenticated
[   19.965747] wlan0: associate with 64:70:02:d3:ed:04 (try 1/3)
[   19.969607] wlan0: RX AssocResp from 64:70:02:d3:ed:04 (capab=0x411 status=0 aid=1)
[   19.977238] wlan0: associated
[   19.977389] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   76.559621] CPU1: Package power limit notification (total events = 1)
[   76.559622] CPU0: Package power limit notification (total events = 1)
[   76.559624] CPU3: Package power limit notification (total events = 1)
[   76.559626] CPU2: Package power limit notification (total events = 1)
[   76.561562] CPU1: Package power limit normal
[   76.561563] CPU0: Package power limit normal
[   76.561565] CPU2: Package power limit normal
[   76.561566] CPU3: Package power limit normal

xorg.log
Kod Seç
[    18.518]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    18.518] X Protocol Version 11, Revision 0
[    18.518] Build Operating System: Linux 3.2.0-26-generic i686 Ubuntu
[    18.518] Current Operating System: Linux aNTUaN 3.5.0-23-generic #35-Ubuntu SMP Thu Jan 24 13:05:29 UTC 2013 i686
[    18.518] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=d5e5b950-da74-45e1-a8c8-2337c3294927 ro
[    18.518] Build Date: 27 November 2012  07:44:37AM
[    18.518] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
[    18.518] Current version of pixman: 0.26.0
[    18.518] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    18.518] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.519] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 22 16:18:37 2013
[    18.558] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.558] (==) No Layout section.  Using the first Screen section.
[    18.558] (==) No screen section available. Using defaults.
[    18.558] (**) |-->Screen "Default Screen Section" (0)
[    18.558] (**) |   |-->Monitor "<default monitor>"
[    18.558] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    18.558] (==) Automatically adding devices
[    18.558] (==) Automatically enabling devices
[    18.558] (==) Automatically adding GPU devices
[    18.558] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.558] Entry deleted from font path.
[    18.558] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    18.558] Entry deleted from font path.
[    18.558] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    18.558] Entry deleted from font path.
[    18.558] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    18.558] Entry deleted from font path.
[    18.558] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    18.558] Entry deleted from font path.
[    18.576] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    18.576] Entry deleted from font path.
[    18.576] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    18.576] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    18.576] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.577] (II) Loader magic: 0xb775d640
[    18.577] (II) Module ABI versions:
[    18.577] X.Org ANSI C Emulation: 0.4
[    18.577] X.Org Video Driver: 13.0
[    18.577] X.Org XInput driver : 18.0
[    18.577] X.Org Server Extension : 7.0
[    18.577] (II) config/udev: Adding drm device (/dev/dri/card1)
[    18.577] (II) config/udev: Adding drm device (/dev/dri/card0)
[    18.578] (--) PCI:*(0:0:2:0) 8086:0116:17aa:397d rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    18.578] (--) PCI: (0:1:0:0) 10de:0df4:17aa:397d rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    18.578] (II) Open ACPI successful (/var/run/acpid.socket)
[    18.578] Initializing built-in extension Generic Event Extension
[    18.578] Initializing built-in extension SHAPE
[    18.578] Initializing built-in extension MIT-SHM
[    18.578] Initializing built-in extension XInputExtension
[    18.578] Initializing built-in extension XTEST
[    18.578] Initializing built-in extension BIG-REQUESTS
[    18.578] Initializing built-in extension SYNC
[    18.578] Initializing built-in extension XKEYBOARD
[    18.578] Initializing built-in extension XC-MISC
[    18.578] Initializing built-in extension SECURITY
[    18.578] Initializing built-in extension XINERAMA
[    18.578] Initializing built-in extension XFIXES
[    18.578] Initializing built-in extension RENDER
[    18.578] Initializing built-in extension RANDR
[    18.578] Initializing built-in extension COMPOSITE
[    18.578] Initializing built-in extension DAMAGE
[    18.578] Initializing built-in extension MIT-SCREEN-SAVER
[    18.578] Initializing built-in extension DOUBLE-BUFFER
[    18.578] Initializing built-in extension RECORD
[    18.578] Initializing built-in extension DPMS
[    18.578] Initializing built-in extension X-Resource
[    18.578] Initializing built-in extension XVideo
[    18.578] Initializing built-in extension XVideo-MotionCompensation
[    18.578] Initializing built-in extension XFree86-VidModeExtension
[    18.578] Initializing built-in extension XFree86-DGA
[    18.578] Initializing built-in extension XFree86-DRI
[    18.578] Initializing built-in extension DRI2
[    18.578] (II) LoadModule: "glx"
[    18.669] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.669] (II) Module glx: vendor="X.Org Foundation"
[    18.669] compiled for 1.13.0, module version = 1.0.0
[    18.669] ABI class: X.Org Server Extension, version 7.0
[    18.669] (==) AIGLX enabled
[    18.669] Loading extension GLX
[    18.669] (==) Matched intel as autoconfigured driver 0
[    18.669] (==) Matched nvidia as autoconfigured driver 1
[    18.669] (==) Matched nouveau as autoconfigured driver 2
[    18.669] (==) Matched nv as autoconfigured driver 3
[    18.669] (==) Matched intel as autoconfigured driver 4
[    18.669] (==) Matched vesa as autoconfigured driver 5
[    18.669] (==) Matched modesetting as autoconfigured driver 6
[    18.669] (==) Matched fbdev as autoconfigured driver 7
[    18.669] (==) Assigned the driver to the xf86ConfigLayout
[    18.669] (II) LoadModule: "intel"
[    18.669] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    18.669] (II) Module intel: vendor="X.Org Foundation"
[    18.669] compiled for 1.13.0, module version = 2.20.9
[    18.669] Module class: X.Org Video Driver
[    18.669] ABI class: X.Org Video Driver, version 13.0
[    18.669] (II) LoadModule: "nvidia"
[    18.749] (WW) Warning, couldn't open module nvidia
[    18.750] (II) UnloadModule: "nvidia"
[    18.750] (II) Unloading nvidia
[    18.750] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    18.750] (II) LoadModule: "nouveau"
[    18.750] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    18.750] (II) Module nouveau: vendor="X.Org Foundation"
[    18.750] compiled for 1.13.0, module version = 1.0.2
[    18.751] Module class: X.Org Video Driver
[    18.751] ABI class: X.Org Video Driver, version 13.0
[    18.751] (II) LoadModule: "nv"
[    18.751] (WW) Warning, couldn't open module nv
[    18.751] (II) UnloadModule: "nv"
[    18.751] (II) Unloading nv
[    18.752] (EE) Failed to load module "nv" (module does not exist, 0)
[    18.752] (II) LoadModule: "vesa"
[    18.752] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.752] (II) Module vesa: vendor="X.Org Foundation"
[    18.752] compiled for 1.12.99.902, module version = 2.3.2
[    18.752] Module class: X.Org Video Driver
[    18.752] ABI class: X.Org Video Driver, version 13.0
[    18.752] (II) LoadModule: "modesetting"
[    18.753] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.753] (II) Module modesetting: vendor="X.Org Foundation"
[    18.753] compiled for 1.13.0, module version = 0.5.0
[    18.753] Module class: X.Org Video Driver
[    18.753] ABI class: X.Org Video Driver, version 13.0
[    18.753] (II) LoadModule: "fbdev"
[    18.753] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.753] (II) Module fbdev: vendor="X.Org Foundation"
[    18.753] compiled for 1.12.99.902, module version = 0.4.3
[    18.753] Module class: X.Org Video Driver
[    18.753] ABI class: X.Org Video Driver, version 13.0
[    18.753] (==) Matched intel as autoconfigured driver 0
[    18.753] (==) Matched nvidia as autoconfigured driver 1
[    18.753] (==) Matched nouveau as autoconfigured driver 2
[    18.754] (==) Matched nv as autoconfigured driver 3
[    18.754] (==) Matched intel as autoconfigured driver 4
[    18.754] (==) Matched vesa as autoconfigured driver 5
[    18.754] (==) Matched modesetting as autoconfigured driver 6
[    18.754] (==) Matched fbdev as autoconfigured driver 7
[    18.754] (==) Assigned the driver to the xf86ConfigLayout
[    18.754] (II) LoadModule: "intel"
[    18.754] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    18.754] (II) Module intel: vendor="X.Org Foundation"
[    18.754] compiled for 1.13.0, module version = 2.20.9
[    18.754] Module class: X.Org Video Driver
[    18.754] ABI class: X.Org Video Driver, version 13.0
[    18.754] (II) UnloadModule: "intel"
[    18.754] (II) Unloading intel
[    18.754] (II) Failed to load module "intel" (already loaded, -1217283166)
[    18.754] (II) LoadModule: "nvidia"
[    18.755] (WW) Warning, couldn't open module nvidia
[    18.755] (II) UnloadModule: "nvidia"
[    18.755] (II) Unloading nvidia
[    18.755] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    18.755] (II) LoadModule: "nouveau"
[    18.755] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    18.756] (II) Module nouveau: vendor="X.Org Foundation"
[    18.756] compiled for 1.13.0, module version = 1.0.2
[    18.756] Module class: X.Org Video Driver
[    18.756] ABI class: X.Org Video Driver, version 13.0
[    18.756] (II) UnloadModule: "nouveau"
[    18.756] (II) Unloading nouveau
[    18.756] (II) Failed to load module "nouveau" (already loaded, 0)
[    18.756] (II) LoadModule: "nv"
[    18.757] (WW) Warning, couldn't open module nv
[    18.757] (II) UnloadModule: "nv"
[    18.757] (II) Unloading nv
[    18.757] (EE) Failed to load module "nv" (module does not exist, 0)
[    18.757] (II) LoadModule: "vesa"
[    18.757] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.757] (II) Module vesa: vendor="X.Org Foundation"
[    18.757] compiled for 1.12.99.902, module version = 2.3.2
[    18.757] Module class: X.Org Video Driver
[    18.757] ABI class: X.Org Video Driver, version 13.0
[    18.757] (II) UnloadModule: "vesa"
[    18.757] (II) Unloading vesa
[    18.757] (II) Failed to load module "vesa" (already loaded, 0)
[    18.757] (II) LoadModule: "modesetting"
[    18.757] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.757] (II) Module modesetting: vendor="X.Org Foundation"
[    18.757] compiled for 1.13.0, module version = 0.5.0
[    18.757] Module class: X.Org Video Driver
[    18.757] ABI class: X.Org Video Driver, version 13.0
[    18.757] (II) UnloadModule: "modesetting"
[    18.757] (II) Unloading modesetting
[    18.757] (II) Failed to load module "modesetting" (already loaded, 0)
[    18.757] (II) LoadModule: "fbdev"
[    18.757] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.757] (II) Module fbdev: vendor="X.Org Foundation"
[    18.757] compiled for 1.12.99.902, module version = 0.4.3
[    18.757] Module class: X.Org Video Driver
[    18.757] ABI class: X.Org Video Driver, version 13.0
[    18.757] (II) UnloadModule: "fbdev"
[    18.757] (II) Unloading fbdev
[    18.757] (II) Failed to load module "fbdev" (already loaded, 0)
[    18.757] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[    18.758] (II) NOUVEAU driver Date:   Wed Sep 12 13:42:43 2012 +0200
[    18.758] (II) NOUVEAU driver for NVIDIA chipset families :
[    18.758] RIVA TNT        (NV04)
[    18.758] RIVA TNT2       (NV05)
[    18.758] GeForce 256     (NV10)
[    18.758] GeForce 2       (NV11, NV15)
[    18.758] GeForce 4MX     (NV17, NV18)
[    18.758] GeForce 3       (NV20)
[    18.758] GeForce 4Ti     (NV25, NV28)
[    18.758] GeForce FX      (NV3x)
[    18.758] GeForce 6       (NV4x)
[    18.758] GeForce 7       (G7x)
[    18.758] GeForce 8       (G8x)
[    18.758] GeForce GTX 200 (NVA0)
[    18.758] GeForce GTX 400 (NVC0)
[    18.758] (II) VESA: driver for VESA chipsets: vesa
[    18.758] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.758] (II) FBDEV: driver for framebuffer: fbdev
[    18.758] (++) using VT number 7

[    18.758] (II) intel(0): using device path '/dev/dri/card0'
[    18.758] (WW) Falling back to old probe method for vesa
[    18.758] (WW) Falling back to old probe method for modesetting
[    18.758] (WW) Falling back to old probe method for fbdev
[    18.758] (II) Loading sub module "fbdevhw"
[    18.758] (II) LoadModule: "fbdevhw"
[    18.758] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    18.758] (II) Module fbdevhw: vendor="X.Org Foundation"
[    18.758] compiled for 1.13.0, module version = 0.0.2
[    18.758] ABI class: X.Org Video Driver, version 13.0
[    18.758] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    18.758] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    18.758] (==) intel(0): RGB weight 888
[    18.758] (==) intel(0): Default visual is TrueColor
[    18.758] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    18.758] (**) intel(0): Relaxed fencing enabled
[    18.758] (**) intel(0): Wait on SwapBuffers? enabled
[    18.758] (**) intel(0): Triple buffering? enabled
[    18.758] (**) intel(0): Framebuffer tiled
[    18.758] (**) intel(0): Pixmaps tiled
[    18.758] (**) intel(0): 3D buffers tiled
[    18.758] (**) intel(0): SwapBuffers wait enabled
[    18.758] (==) intel(0): video overlay key set to 0x101fe
[    18.758] (II) intel(0): Output LVDS1 has no monitor section
[    18.758] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    18.916] (II) intel(0): Output VGA1 has no monitor section
[    18.916] (II) intel(0): Output HDMI1 has no monitor section
[    18.964] (II) intel(0): Output DP1 has no monitor section
[    18.964] (II) intel(0): EDID for output LVDS1
[    18.964] (II) intel(0): Manufacturer: LGD  Model: 2dc  Serial#: 0
[    18.964] (II) intel(0): Year: 2010  Week: 0
[    18.964] (II) intel(0): EDID Version: 1.3
[    18.964] (II) intel(0): Digital Display Input
[    18.964] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    18.964] (II) intel(0): Gamma: 2.20
[    18.964] (II) intel(0): No DPMS capabilities specified
[    18.964] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    18.964] (II) intel(0): First detailed timing is preferred mode
[    18.964] (II) intel(0): redX: 0.613 redY: 0.371   greenX: 0.350 greenY: 0.606
[    18.964] (II) intel(0): blueX: 0.152 blueY: 0.099   whiteX: 0.313 whiteY: 0.329
[    18.964] (II) intel(0): Manufacturer's mask: 0
[    18.964] (II) intel(0): Supported detailed timing:
[    18.964] (II) intel(0): clock: 70.0 MHz   Image Size:  344 x 194 mm
[    18.964] (II) intel(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1492 h_border: 0
[    18.964] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 782 v_border: 0
[    18.964] (II) intel(0):  LG Display
[    18.964] (II) intel(0):  LP156WH4-TLA1
[    18.964] (II) intel(0): EDID (in hex):
[    18.964] (II) intel(0): 00ffffffffffff0030e4dc0200000000
[    18.964] (II) intel(0): 00140103802213780a09159d5f599b27
[    18.964] (II) intel(0): 19505400000001010101010101010101
[    18.964] (II) intel(0): 010101010101581b567e50000e302430
[    18.964] (II) intel(0): 350058c2100000190000000000000000
[    18.964] (II) intel(0): 00000000000000000000000000fe004c
[    18.964] (II) intel(0): 4720446973706c61790a2020000000fe
[    18.964] (II) intel(0): 004c503135365748342d544c41310009
[    18.964] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    18.964] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    18.964] (II) intel(0): Printing probed modes for output LVDS1
[    18.964] (II) intel(0): Modeline "1366x768"x60.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    18.964] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    18.964] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    18.964] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    18.964] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    18.964] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    18.964] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    19.116] (II) intel(0): EDID for output VGA1
[    19.116] (II) intel(0): Manufacturer: SAM  Model: 499  Serial#: 1129132592
[    19.116] (II) intel(0): Year: 2009  Week: 16
[    19.116] (II) intel(0): EDID Version: 1.3
[    19.116] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    19.116] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    19.116] (II) intel(0): Max Image Size [cm]: horiz.: 44  vert.: 25
[    19.116] (II) intel(0): Gamma: 2.20
[    19.116] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[    19.116] (II) intel(0): First detailed timing is preferred mode
[    19.116] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    19.116] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    19.116] (II) intel(0): Supported established timings:
[    19.116] (II) intel(0): 720x400@70Hz
[    19.116] (II) intel(0): 640x480@60Hz
[    19.116] (II) intel(0): 640x480@67Hz
[    19.116] (II) intel(0): 640x480@72Hz
[    19.116] (II) intel(0): 640x480@75Hz
[    19.116] (II) intel(0): 800x600@56Hz
[    19.116] (II) intel(0): 800x600@60Hz
[    19.116] (II) intel(0): 800x600@72Hz
[    19.116] (II) intel(0): 800x600@75Hz
[    19.116] (II) intel(0): 832x624@75Hz
[    19.116] (II) intel(0): 1024x768@60Hz
[    19.116] (II) intel(0): 1024x768@70Hz
[    19.116] (II) intel(0): 1024x768@75Hz
[    19.116] (II) intel(0): 1280x1024@75Hz
[    19.116] (II) intel(0): 1152x864@75Hz
[    19.116] (II) intel(0): Manufacturer's mask: 0
[    19.116] (II) intel(0): Supported standard timings:
[    19.116] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    19.116] (II) intel(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    19.116] (II) intel(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    19.116] (II) intel(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    19.116] (II) intel(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    19.116] (II) intel(0): Supported detailed timing:
[    19.116] (II) intel(0): clock: 97.8 MHz   Image Size:  443 x 249 mm
[    19.116] (II) intel(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1760 h_border: 0
[    19.116] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 908 v_blanking: 926 v_border: 0
[    19.116] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    19.116] (II) intel(0): Monitor name: SyncMaster
[    19.116] (II) intel(0): Serial No: H9LS410924
[    19.116] (II) intel(0): EDID (in hex):
[    19.116] (II) intel(0): 00ffffffffffff004c2d990430324d43
[    19.116] (II) intel(0): 101301030e2c19782aee91a3544c9926
[    19.116] (II) intel(0): 0f5054bfef80714f8100950081408180
[    19.116] (II) intel(0): 0101010101012f2640a060841a303020
[    19.116] (II) intel(0): 3500bbf91000001a000000fd00384b1e
[    19.116] (II) intel(0): 510e000a202020202020000000fc0053
[    19.116] (II) intel(0): 796e634d61737465720a2020000000ff
[    19.116] (II) intel(0): 0048394c533431303932340a20200069
[    19.116] (II) intel(0): Printing probed modes for output VGA1
[    19.116] (II) intel(0): Modeline "1600x900"x60.0   97.75  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.5 kHz eP)
[    19.116] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    19.116] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    19.116] (II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    19.116] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    19.116] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    19.116] (II) intel(0): Modeline "1366x768"x60.0   85.89  1366 1439 1583 1800  768 769 772 795 -hsync +vsync (47.7 kHz)
[    19.116] (II) intel(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    19.116] (II) intel(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[    19.116] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[    19.116] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    19.116] (II) intel(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz e)
[    19.116] (II) intel(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    19.116] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    19.116] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    19.116] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.116] (II) intel(0): Modeline "1024x576"x60.0   46.97  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[    19.116] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    19.116] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    19.116] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    19.116] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.116] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    19.116] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    19.116] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    19.116] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    19.116] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    19.116] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.116] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.117] (II) intel(0): EDID for output HDMI1
[    19.168] (II) intel(0): EDID for output DP1
[    19.168] (II) intel(0): Output LVDS1 connected
[    19.168] (II) intel(0): Output VGA1 connected
[    19.168] (II) intel(0): Output HDMI1 disconnected
[    19.168] (II) intel(0): Output DP1 disconnected
[    19.168] (II) intel(0): Using exact sizes for initial modes
[    19.168] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    19.168] (II) intel(0): Output VGA1 using initial mode 1366x768
[    19.168] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.168] (II) intel(0): Kernel page flipping support detected, enabling
[    19.168] (==) intel(0): DPI set to (96, 96)
[    19.168] (II) Loading sub module "fb"
[    19.168] (II) LoadModule: "fb"
[    19.168] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.402] (II) Module fb: vendor="X.Org Foundation"
[    19.402] compiled for 1.13.0, module version = 1.0.0
[    19.402] ABI class: X.Org ANSI C Emulation, version 0.4
[    19.402] (II) Loading sub module "dri2"
[    19.402] (II) LoadModule: "dri2"
[    19.402] (II) Module "dri2" already built-in
[    19.402] (II) Loading sub module "dri"
[    19.402] (II) LoadModule: "dri"
[    19.402] (II) Module "dri" already built-in
[    19.402] (II) NOUVEAU(G0): Loaded DRI module
[    19.402] (II) [drm] DRM interface version 1.4
[    19.402] (II) [drm] DRM open master succeeded.
[    19.402] (--) NOUVEAU(G0): Chipset: "NVIDIA NVc1"
[    19.403] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    19.403] (==) NOUVEAU(G0): RGB weight 888
[    19.403] (==) NOUVEAU(G0): Default visual is TrueColor
[    19.403] (==) NOUVEAU(G0): Using HW cursor
[    19.403] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[    19.403] (==) NOUVEAU(G0): Page flipping enabled
[    19.403] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[    19.452] (II) NOUVEAU(G0): Output VGA-2 has no monitor section
[    19.497] (II) NOUVEAU(G0): EDID for output VGA-2
[    19.497] (II) NOUVEAU(G0): Printing probed modes for output VGA-2
[    19.497] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.497] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.497] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    19.497] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    19.497] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    19.497] (II) NOUVEAU(G0): Output VGA-2 connected
[    19.497] (II) NOUVEAU(G0): Using exact sizes for initial modes
[    19.497] (II) NOUVEAU(G0): Output VGA-2 using initial mode 1024x768
[    19.497] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.497] (--) NOUVEAU(G0): Virtual size is 1366x768 (pitch 0)
[    19.497] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    19.497] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.497] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    19.497] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.497] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    19.497] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    19.497] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    19.497] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    19.497] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    19.497] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    19.497] (==) NOUVEAU(G0): DPI set to (96, 96)
[    19.497] (II) Loading sub module "fb"
[    19.497] (II) LoadModule: "fb"
[    19.498] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.498] (II) Module fb: vendor="X.Org Foundation"
[    19.498] compiled for 1.13.0, module version = 1.0.0
[    19.498] ABI class: X.Org ANSI C Emulation, version 0.4
[    19.498] (II) Loading sub module "exa"
[    19.498] (II) LoadModule: "exa"
[    19.498] (II) Loading /usr/lib/xorg/modules/libexa.so
[    19.498] (II) Module exa: vendor="X.Org Foundation"
[    19.498] compiled for 1.13.0, module version = 2.6.0
[    19.498] ABI class: X.Org Video Driver, version 13.0
[    19.498] (II) Loading sub module "shadowfb"
[    19.498] (II) LoadModule: "shadowfb"
[    19.498] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    19.498] (II) Module shadowfb: vendor="X.Org Foundation"
[    19.498] compiled for 1.13.0, module version = 1.0.0
[    19.498] ABI class: X.Org ANSI C Emulation, version 0.4
[    19.498] (II) UnloadModule: "vesa"
[    19.498] (II) Unloading vesa
[    19.498] (II) UnloadModule: "modesetting"
[    19.498] (II) Unloading modesetting
[    19.498] (II) UnloadModule: "fbdev"
[    19.498] (II) Unloading fbdev
[    19.498] (II) UnloadSubModule: "fbdevhw"
[    19.498] (II) Unloading fbdevhw
[    19.498] (==) Depth 24 pixmap format is 32 bpp
[    19.499] (II) NOUVEAU(G0): Opened GPU channel 1
[    19.502] (II) NOUVEAU(G0): DRM doesn't support sync-to-vblank
[    19.502] (II) NOUVEAU(G0): [DRI2] Setup complete
[    19.502] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    19.502] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    19.502] (II) EXA(256): Driver allocated offscreen pixmaps
[    19.502] (II) EXA(256): Driver registered support for the following operations:
[    19.502] (II)         Solid
[    19.502] (II)         Copy
[    19.502] (II)         Composite (RENDER acceleration)
[    19.502] (II)         UploadToScreen
[    19.502] (II)         DownloadFromScreen
[    19.502] (==) NOUVEAU(G0): Backing store disabled
[    19.502] (==) NOUVEAU(G0): Silken mouse enabled
[    19.502] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    19.502] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    19.502] (==) NOUVEAU(G0): DPMS enabled
[    19.502] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.502] (II) intel(0): [DRI2] Setup complete
[    19.502] (II) intel(0): [DRI2]   DRI driver: i965
[    19.502] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    19.503] (II) UXA(0): Driver registered support for the following operations:
[    19.503] (II)         solid
[    19.503] (II)         copy
[    19.503] (II)         composite (RENDER acceleration)
[    19.503] (II)         put_image
[    19.503] (II)         get_image
[    19.503] (==) intel(0): Backing store disabled
[    19.503] (==) intel(0): Silken mouse enabled
[    19.503] (II) intel(0): Initializing HW Cursor
[    19.503] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.503] (==) intel(0): DPMS enabled
[    19.503] (==) intel(0): Intel XvMC decoder enabled
[    19.503] (II) intel(0): Set up textured video
[    19.503] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    19.503] (II) intel(0): direct rendering: DRI2 Enabled
[    19.503] (==) intel(0): hotplug detection: "enabled"
[    19.803] (--) RandR disabled
[    19.811] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    19.811] (II) AIGLX: enabled GLX_INTEL_swap_event
[    19.811] (II) AIGLX: enabled GLX_ARB_create_context
[    19.811] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    19.811] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    19.811] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    19.811] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    19.811] (II) AIGLX: Loaded and initialized i965
[    19.811] (II) GLX: Initialized DRI2 GL provider for screen 0
[    19.811] (II) intel(0): Setting screen physical size to 361 x 203
[    19.852] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    19.854] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    19.854] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.854] (II) LoadModule: "evdev"
[    19.854] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.854] (II) Module evdev: vendor="X.Org Foundation"
[    19.854] compiled for 1.13.0, module version = 2.7.3
[    19.854] Module class: X.Org XInput Driver
[    19.854] ABI class: X.Org XInput driver, version 18.0
[    19.854] (II) Using input driver 'evdev' for 'Power Button'
[    19.854] (**) Power Button: always reports core events
[    19.854] (**) evdev: Power Button: Device: "/dev/input/event2"
[    19.854] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.854] (--) evdev: Power Button: Found keys
[    19.854] (II) evdev: Power Button: Configuring as keyboard
[    19.854] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    19.854] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.854] (**) Option "xkb_rules" "evdev"
[    19.854] (**) Option "xkb_model" "pc105"
[    19.854] (**) Option "xkb_layout" "tr"
[    19.856] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    19.856] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    19.856] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.856] (II) Using input driver 'evdev' for 'Video Bus'
[    19.856] (**) Video Bus: always reports core events
[    19.856] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    19.856] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.856] (--) evdev: Video Bus: Found keys
[    19.856] (II) evdev: Video Bus: Configuring as keyboard
[    19.857] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7"
[    19.857] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    19.857] (**) Option "xkb_rules" "evdev"
[    19.857] (**) Option "xkb_model" "pc105"
[    19.857] (**) Option "xkb_layout" "tr"
[    19.857] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    19.857] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.857] (II) Using input driver 'evdev' for 'Video Bus'
[    19.857] (**) Video Bus: always reports core events
[    19.857] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    19.857] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.857] (--) evdev: Video Bus: Found keys
[    19.857] (II) evdev: Video Bus: Configuring as keyboard
[    19.857] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input6/event6"
[    19.857] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    19.857] (**) Option "xkb_rules" "evdev"
[    19.857] (**) Option "xkb_model" "pc105"
[    19.857] (**) Option "xkb_layout" "tr"
[    19.857] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    19.857] (II) No input driver specified, ignoring this device.
[    19.857] (II) This device may have been added with another device file.
[    19.857] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    19.857] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    19.858] (II) Using input driver 'evdev' for 'Sleep Button'
[    19.858] (**) Sleep Button: always reports core events
[    19.858] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    19.858] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    19.858] (--) evdev: Sleep Button: Found keys
[    19.858] (II) evdev: Sleep Button: Configuring as keyboard
[    19.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    19.858] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    19.858] (**) Option "xkb_rules" "evdev"
[    19.858] (**) Option "xkb_model" "pc105"
[    19.858] (**) Option "xkb_layout" "tr"
[    19.858] (II) config/udev: Adding drm device (/dev/dri/card1)
[    19.858] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[    19.858] (II) No input driver specified, ignoring this device.
[    19.858] (II) This device may have been added with another device file.
[    19.858] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[    19.858] (II) No input driver specified, ignoring this device.
[    19.858] (II) This device may have been added with another device file.
[    19.858] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[    19.858] (II) No input driver specified, ignoring this device.
[    19.858] (II) This device may have been added with another device file.
[    19.859] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[    19.859] (II) No input driver specified, ignoring this device.
[    19.859] (II) This device may have been added with another device file.
[    19.859] (II) config/udev: Adding drm device (/dev/dri/card0)
[    19.859] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[    19.859] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    19.859] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    19.859] (**) Logitech USB Receiver: always reports core events
[    19.859] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[    19.859] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    19.859] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    19.859] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    19.859] (--) evdev: Logitech USB Receiver: Found relative axes
[    19.859] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    19.859] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    19.859] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    19.859] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    19.859] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.859] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4/event4"
[    19.859] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[    19.859] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    19.859] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    19.859] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    19.859] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    19.859] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    19.859] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    19.859] (II) No input driver specified, ignoring this device.
[    19.859] (II) This device may have been added with another device file.
[    19.860] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    19.860] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.860] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    19.860] (**) Logitech USB Receiver: always reports core events
[    19.860] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[    19.860] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    19.860] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    19.860] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    19.860] (--) evdev: Logitech USB Receiver: Found relative axes
[    19.860] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    19.860] (--) evdev: Logitech USB Receiver: Found absolute axes
[    19.860] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    19.860] (--) evdev: Logitech USB Receiver: Found keys
[    19.860] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    19.860] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    19.860] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    19.860] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    19.860] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input5/event5"
[    19.860] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    19.860] (**) Option "xkb_rules" "evdev"
[    19.860] (**) Option "xkb_model" "pc105"
[    19.860] (**) Option "xkb_layout" "tr"
[    19.860] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    19.860] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    19.860] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    19.860] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    19.860] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    19.860] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    19.860] (II) config/udev: Adding input device Lenovo easy camera (/dev/input/event8)
[    19.860] (**) Lenovo easy camera: Applying InputClass "evdev keyboard catchall"
[    19.860] (II) Using input driver 'evdev' for 'Lenovo easy camera'
[    19.860] (**) Lenovo easy camera: always reports core events
[    19.860] (**) evdev: Lenovo easy camera: Device: "/dev/input/event8"
[    19.860] (--) evdev: Lenovo easy camera: Vendor 0xbda Product 0x58ea
[    19.860] (--) evdev: Lenovo easy camera: Found keys
[    19.860] (II) evdev: Lenovo easy camera: Configuring as keyboard
[    19.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
[    19.860] (II) XINPUT: Adding extended input device "Lenovo easy camera" (type: KEYBOARD, id 12)
[    19.860] (**) Option "xkb_rules" "evdev"
[    19.860] (**) Option "xkb_model" "pc105"
[    19.860] (**) Option "xkb_layout" "tr"
[    19.861] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    19.861] (II) No input driver specified, ignoring this device.
[    19.861] (II) This device may have been added with another device file.
[    19.861] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    19.861] (II) No input driver specified, ignoring this device.
[    19.861] (II) This device may have been added with another device file.
[    19.861] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    19.861] (II) No input driver specified, ignoring this device.
[    19.861] (II) This device may have been added with another device file.
[    19.861] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    19.861] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.861] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.861] (**) AT Translated Set 2 keyboard: always reports core events
[    19.861] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    19.861] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.861] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.861] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.861] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    19.861] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    19.861] (**) Option "xkb_rules" "evdev"
[    19.861] (**) Option "xkb_model" "pc105"
[    19.861] (**) Option "xkb_layout" "tr"
[    19.862] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[    19.862] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    19.862] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    19.862] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    19.862] (II) LoadModule: "synaptics"
[    19.862] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.862] (II) Module synaptics: vendor="X.Org Foundation"
[    19.862] compiled for 1.12.99.905, module version = 1.6.2
[    19.862] Module class: X.Org XInput Driver
[    19.862] ABI class: X.Org XInput driver, version 18.0
[    19.862] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    19.862] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.862] (**) Option "Device" "/dev/input/event14"
[    19.862] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    19.862] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    19.862] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.863] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[    19.863] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    19.863] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    19.863] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    19.863] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    19.863] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    19.863] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    19.863] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    19.863] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    19.863] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    19.863] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    19.863] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    19.863] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[    19.863] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    19.863] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    19.863] (**) Ideapad extra buttons: always reports core events
[    19.863] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event9"
[    19.863] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    19.863] (--) evdev: Ideapad extra buttons: Found keys
[    19.863] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    19.863] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input9/event9"
[    19.863] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[    19.863] (**) Option "xkb_rules" "evdev"
[    19.863] (**) Option "xkb_model" "pc105"
[    19.863] (**) Option "xkb_layout" "tr"
[    19.865] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event10)
[    19.865] (II) No input driver specified, ignoring this device.
[    19.865] (II) This device may have been added with another device file.
[    19.865] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    19.865] (II) No input driver specified, ignoring this device.
[    19.865] (II) This device may have been added with another device file.
[    20.472] (II) intel(0): EDID vendor "LGD", prod id 732
[    20.472] (II) intel(0): Printing DDC gathered Modelines:
[    20.472] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    21.577] (II) intel(0): EDID vendor "LGD", prod id 732
[    21.577] (II) intel(0): Printing DDC gathered Modelines:
[    21.577] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    34.117] (II) intel(0): EDID vendor "LGD", prod id 732
[    34.117] (II) intel(0): Printing DDC gathered Modelines:
[    34.117] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    34.496] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[    35.623] (II) intel(0): EDID vendor "LGD", prod id 732
[    35.623] (II) intel(0): Printing DDC gathered Modelines:
[    35.623] (II) intel(0): Modeline "1366x768"x0.0   70.00  1366 1402 1450 1492  768 771 776 782 -hsync -vsync (46.9 kHz eP)
[    37.770] (II) XKB: reuse xkmfile /var/lib/xkb/server-B18A79FB7622D55D72505D318BB9CB39546EB153.xkm
[    57.876] (II) intel(0): EDID vendor "SAM", prod id 1177
[    57.876] (II) intel(0): Using hsync ranges from config file
[    57.876] (II) intel(0): Using vrefresh ranges from config file
[    57.876] (II) intel(0): Printing DDC gathered Modelines:
[    57.876] (II) intel(0): Modeline "1600x900"x0.0   97.75  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.5 kHz eP)
[    57.876] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    57.876] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    57.876] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    57.876] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    57.876] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    57.876] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    57.876] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    57.876] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    57.876] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    57.876] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    57.876] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    57.876] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    57.876] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    57.876] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    57.876] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    57.876] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    57.876] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    57.876] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    57.876] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

if

#237
22 Şubat 2013 - 16:41:04
@araknafobia,
Kod Seç
sudo burg-mkconfig -o /boot/burg/burg.cfg komutundan sonra dener misiniz?

araknafobia

#238
23 Şubat 2013 - 12:11:25
@if,
Malesef bir değişiklik yok...

engin20020

#239
28 Mayıs 2013 - 21:31:37
Arkadaşlar 13.04 için yukarıda verilen komutları kullandım ancak olmadı .nette araştırdım bu sayfada yapılan anlatım ile işlem tamam. buyrun.
http://www.unixmen.com/how-to-install-burg-boot-loader-in-ubuntu-1304-and-linuxmint/

heartsmagic

#240
29 Mayıs 2013 - 14:45:25
@engin20020, yukarıdaki komutlar dediğin hangileri? Bu başlığın ilk iletisindeki anlatım senin verdiğin bağlantı ile aynı zaten.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

adokas

#241
14 Ekim 2013 - 23:00:52
Merhaba arkadaşlar 12.10 sürümü için
Kod Seç
sudo burg-install "/dev/sda" yazdığımda;

Kod Seç
sudo: burg-install: command not found cevabı alıyorum herhangi bir çözüm önerisi olan var mı?

bytan

#242
15 Ekim 2013 - 02:59:26
Çıktısı nedir?

Kod Seç
dpkg -l | grep burg
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

adokas

#243
15 Ekim 2013 - 23:23:31
Hiç bir çıktı almıyorum gerçekten ilginç;

Kod Seç
ali@ubuntu:~$ dpkg -l | grep burg
ali@ubuntu:~$

bytan

#244
16 Ekim 2013 - 02:31:26
Kurulum gerçekleşmediyse normaldir. Burg kurulumu için hangi adımları uyguladın?
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

adokas

#245
16 Ekim 2013 - 11:22:17
Kod Seç
sudo add-apt-repository ppa:n-muench/burg

Bu kodu kullanmıştım kurmak için.

heartsmagic

#246
16 Ekim 2013 - 16:57:50
@adokas, o komut sadece depoyu ekler, paketi kurmaz. Devamını yaptın mı?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

harunkaraca

#247
17 Nisan 2014 - 06:57:43
yeterince gelişmiş degil ama görsel.

ByLoLo123

#248
10 Haziran 2014 - 03:06:54
Kod Seç
sudo burg-install "/dev/sda"

Komutunun ardından ;

Kod Seç
/usr/sbin/burg-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
/usr/sbin/burg-setup: warn: Embedding is not possible.  GRUB can only be installed in this setup by using blocklists.  However, blocklists are UNRELIABLE and their use is discouraged..
/usr/sbin/burg-setup: error: if you really want blocklists, use --force.

Çıktısı alıyorum , ne yapmam gerek ?

Bu arada aranıza yeni katıldım :)

heartsmagic

#249
11 Haziran 2014 - 02:21:04
--force parametresi denenebilir ancak sorun yaşatır mı bilemiyorum. Disk GPT gibi görünüyor haliyle.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.
Yazdır
Yukarı git Sayfa 1 ... 9 10 11
Kullanıcı Eylemleri