Ubuntu başlarken, 9.04'a ilk geçtiğimden beri, IO APIC resources cannot read gibisinden bir satır geldikten sonra açılmaya başlıyor. Tam okuyamadan geçtiği için yazı tam böyle olmayabilir. Bunun nedeni nedir?
Biraz araştırdım da hatanın doğrusu şu sanırım?
Alıntı YapIO APIC resources could not be allocated
Evet evet buydu.
Aşağıdaki adreste bir çözüm anlatılmış. Kernel değişkenlerini bilmediğim için daha bilgili bir arkadaşın çözümü anlatması daha iyi olur. :)
http://ubuntu-virginia.ubuntuforums.org/showthread.php?p=7695056
Bu linkteki gibi hatalar almıyorum ben yalnız. Sadece "starting up..." dan sonraki satırı alıyorum. Orada da çıkan o soldaki rakamlar aynı mı hatırlamıyorum. Daha doğrusu tam göremeden geçtiği için...
Sorun olacak bir hata oldugunu sanmiyorum. VirtualBoxta da IO APIC aktif etmezsen ayni hatayi aliyorsun :) Ne oldugunu ögrenmek istiyorsan, http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller buraya bakabilirsin.
Yok, zaten görünürde bir sorun çıkardığı yok. Fakat belki bilmediğim, anlamadığım bir şekilde sisteme, performansa ne bileyim başka bir şeye etki ediyordur diye danışayım dedim.
Menu.lst dosyanda kernel satırına aşağıdakini ekleyerek deneme yapabilirsin:
noapic nolapic acpi=off
Soldaki rakamlar sürekli değişirler. Sadece zamanı gösteriyorlar. Söylendiği gibi öyle mühim bir durum değil.
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid 95083077-92c9-4dbb-bb12-0cf2ac3ec3a9
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=95083077-92c9-4dbb-bb12-0cf2ac3ec3a9 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
Bunların altına mı? Her bir Ubuntu Kerneli için yapmam gerekiyor mu?
Denem amaçlı sadece bu girdi de, kernel satırının sonuna splash kelimesinden sonra ekleyin.
Yaptım ama yine de aynı hata gözüküyor başlangıçta. BIOS'tan baktım, orada da kapalı APIC'le ilgili olan şey.
Bu hatayı GRUB geçtikten sonra alıyorsun değil mi?
head -n -50 /var/log/dmesg
çıktısını buraya yapıştırır mısın?
Evet, grub'tan Ubuntu'yu seçtikten sonra "starting" dedikten sonraki satırda geliyor, sonra hemen Ubuntu yükleme ekranı geliyor.
Çıktı biraz uzun:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378ba000 - 37fefefe
[ 0.000000] Allocated new RAMDISK: 0087d000 - 00fb2efe
[ 0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fefefd to 0087d000 - 00fb2efd
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087d000 - 0000fb2efe] NEW RAMDISK ==> [000087d000 - 0000fb2efe]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=UUID=95083077-92c9-4dbb-bb12-0cf2ac3ec3a9 ro quiet splash noapic nolapic acpi=off
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2806.704 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5242240 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1018512k/1048512k available (4115k kernel code, 29252k reserved, 2199k data, 532k init, 143304k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.40 BogoMIPS (lpj=11226816)
[ 0.004049] Security Framework initialized
[ 0.004067] SELinux: Disabled at boot.
[ 0.004098] AppArmor: AppArmor initialized
[ 0.004118] Mount-cache hash table entries: 512
[ 0.004344] Initializing cgroup subsys ns
[ 0.004351] Initializing cgroup subsys cpuacct
[ 0.004355] Initializing cgroup subsys memory
[ 0.004363] Initializing cgroup subsys freezer
[ 0.004384] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004388] CPU: L2 cache: 512K
[ 0.004393] CPU: Hyper-Threading is disabled
[ 0.004417] Checking 'hlt' instruction... OK.
[ 0.020874] SMP alternatives: switching to UP code
[ 0.120787] Freeing SMP alternatives: 18k freed
[ 0.120899] weird, boot CPU (#0) not listedby the BIOS.
[ 0.120902] SMP motherboard not detected.
[ 0.120906] Local APIC not detected. Using dummy APIC emulation.
[ 0.120908] SMP disabled
[ 0.121582] Brought up 1 CPUs
[ 0.121587] Total of 1 processors activated (5613.40 BogoMIPS).
[ 0.121610] CPU0 attaching NULL sched-domain.
[ 0.124431] net_namespace: 776 bytes
[ 0.124449] Booting paravirtualized kernel on bare hardware
[ 0.124743] Time: 11:54:45 Date: 08/27/09
[ 0.124751] regulator: core version 0.5
[ 0.124800] NET: Registered protocol family 16
[ 0.124964] EISA bus registered
[ 0.157300] PCI: PCI BIOS revision 2.10 entry at 0xfb550, last bus=1
[ 0.157303] PCI: Using configuration type 1 for base access
[ 0.158457] ACPI: Interpreter disabled.
[ 0.158649] SCSI subsystem initialized
[ 0.158699] libata version 3.00 loaded.
[ 0.158762] usbcore: registered new interface driver usbfs
[ 0.158784] usbcore: registered new interface driver hub
[ 0.158818] usbcore: registered new device driver usb
[ 0.158951] PCI: Probing PCI hardware
[ 0.158956] PCI: Probing PCI hardware (bus 00)
[ 0.159019] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.159101] pci 0000:00:01.0: supports D1
[ 0.159145] pci 0000:00:09.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.159152] pci 0000:00:09.0: reg 14 32bit mmio: [0xe3000000-0xe30000ff]
[ 0.159179] pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[ 0.159189] pci 0000:00:09.0: supports D1 D2
[ 0.159191] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[ 0.159196] pci 0000:00:09.0: PME# disabled
[ 0.159232] pci 0000:00:0a.0: reg 10 io port: [0xc400-0xc4ff]
[ 0.159272] pci 0000:00:0a.0: supports D1 D2
[ 0.159331] pci 0000:00:10.0: reg 20 io port: [0xc800-0xc81f]
[ 0.159350] pci 0000:00:10.0: supports D1 D2
[ 0.159352] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159356] pci 0000:00:10.0: PME# disabled
[ 0.159411] pci 0000:00:10.1: reg 20 io port: [0xcc00-0xcc1f]
[ 0.159431] pci 0000:00:10.1: supports D1 D2
[ 0.159433] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159437] pci 0000:00:10.1: PME# disabled
[ 0.159489] pci 0000:00:10.2: reg 20 io port: [0xd000-0xd01f]
[ 0.159508] pci 0000:00:10.2: supports D1 D2
[ 0.159510] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159515] pci 0000:00:10.2: PME# disabled
[ 0.159549] pci 0000:00:10.3: reg 10 32bit mmio: [0xe3001000-0xe30010ff]
[ 0.159587] pci 0000:00:10.3: supports D1 D2
[ 0.159589] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159593] pci 0000:00:10.3: PME# disabled
[ 0.159665] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.159672] pci 0000:00:11.0: quirk: region 0400-047f claimed by vt8235 PM
[ 0.159677] pci 0000:00:11.0: quirk: region 0500-050f claimed by vt8235 SMB
[ 0.159739] pci 0000:00:11.1: reg 20 io port: [0xd400-0xd40f]
[ 0.159798] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.159838] pci 0000:00:11.5: supports D1 D2
[ 0.159875] pci 0000:00:12.0: reg 10 io port: [0xe000-0xe0ff]
[ 0.159883] pci 0000:00:12.0: reg 14 32bit mmio: [0xe3002000-0xe30020ff]
[ 0.159917] pci 0000:00:12.0: supports D1 D2
[ 0.159919] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159923] pci 0000:00:12.0: PME# disabled
[ 0.159981] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff]
[ 0.160011] pci 0000:01:00.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff]
[ 0.160032] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.160082] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.160087] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.160917] pci 0000:00:11.0: VIA IRQ router [1106:3177]
[ 0.161051] Bluetooth: Core ver 2.13
[ 0.161051] NET: Registered protocol family 31
[ 0.161051] Bluetooth: HCI device and connection manager initialized
[ 0.161051] Bluetooth: HCI socket layer initialized
[ 0.161051] NET: Registered protocol family 8
[ 0.161051] NET: Registered protocol family 20
[ 0.161051] NetLabel: Initializing
[ 0.161051] NetLabel: domain hash size = 128
[ 0.161051] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.161051] NetLabel: unlabeled traffic allowed by default
[ 0.161051] AppArmor: AppArmor Filesystem Enabled
[ 0.161051] pnp: PnP ACPI: disabled
[ 0.161051] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.161051] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf90
[ 0.161051] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfc0, dseg 0xf0000
[ 0.161872] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[ 0.161891] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[ 0.161894] system 00:07: iomem range 0xfffe0000-0xffffffff has been reserved
[ 0.161897] system 00:07: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 0.161900] system 00:07: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.161903] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[ 0.161910] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.161913] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.161915] system 00:08: iomem range 0xf8000-0xfffff could not be reserved
[ 0.161918] system 00:08: iomem range 0xcc800-0xcffff has been reserved
[ 0.162122] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.162124] pci 0000:00:01.0: IO window: disabled
[ 0.162130] pci 0000:00:01.0: MEM window: 0xe0000000-0xe1ffffff
[ 0.162135] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 0.162153] pci 0000:00:01.0: setting latency timer to 64
[ 0.162157] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.162159] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.162161] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.162163] bus: 01 index 1 mmio: [0xe0000000-0xe1ffffff]
[ 0.162166] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff]
[ 0.162168] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.162176] NET: Registered protocol family 2
[ 0.162227] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.162227] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.165160] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.165953] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.165959] TCP reno registered
[ 0.166207] NET: Registered protocol family 1
[ 0.166398] checking if image is initramfs... it is
[ 0.793021] Freeing initrd memory: 7383k freed
[ 0.793115] cpufreq: No nForce2 chipset.
[ 0.793295] audit: initializing netlink socket (disabled)
[ 0.793325] type=2000 audit(1251374085.791:1): initialized
[ 0.800129] highmem bounce pool size: 64 pages
[ 0.800138] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.801358] VFS: Disk quotas dquot_6.5.1
[ 0.801422] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.802112] fuse init (API version 7.10)
[ 0.802206] msgmni has been set to 1724
[ 0.802445] alg: No test for stdrng (krng)
[ 0.802461] io scheduler noop registered
[ 0.802463] io scheduler anticipatory registered
[ 0.802465] io scheduler deadline registered
[ 0.802487] io scheduler cfq registered (default)
[ 0.802503] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.802598] pci 0000:01:00.0: Boot video device
[ 0.802706] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.802717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.802805] isapnp: Scanning for PnP cards...
[ 1.156866] isapnp: No Plug & Play device found
[ 1.158024] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.158124] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.158542] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.159391] brd: module loaded
[ 1.159738] loop: module loaded
[ 1.159834] Fixed MDIO Bus: probed
[ 1.159842] PPP generic driver version 2.4.2
[ 1.159908] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.159986] Driver 'sd' needs updating - please use bus_type methods
[ 1.159997] Driver 'sr' needs updating - please use bus_type methods
[ 1.160547] pata_via 0000:00:11.1: version 0.3.3
[ 1.160782] scsi0 : pata_via
[ 1.160912] scsi1 : pata_via
[ 1.160955] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd400 irq 14
[ 1.160959] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd408 irq 15
[ 1.324485] ata1.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
[ 1.324489] ata1.00: 80293248 sectors, multi 16: LBA
[ 1.340366] ata1.00: configured for UDMA/133
[ 1.512277] ata2.00: ATAPI: HL-DT-ST GCE-8527B, 1.01, max UDMA/33
[ 1.512313] ata2.01: ATAPI: GCR-8523B, 1.01, max MWDMA2
[ 1.544169] ata2.00: configured for UDMA/33
[ 1.560614] ata2.01: configured for MWDMA2
[ 1.561100] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
[ 1.561226] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors: (41.1 GB/38.2 GiB)
[ 1.561246] sd 0:0:0:0: [sda] Write Protect is off
[ 1.561249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.561277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.561360] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors: (41.1 GB/38.2 GiB)
[ 1.561376] sd 0:0:0:0: [sda] Write Protect is off
[ 1.561379] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.561406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.561410] sda: sda1 sda2 sda3
[ 1.601288] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.601354] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.601707] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8527B 1.01 PQ: 0 ANSI: 5
[ 1.605198] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.605203] Uniform CD-ROM driver Revision: 3.20
[ 1.605329] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.605387] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.608058] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-ROM GCR-8523B 1.01 PQ: 0 ANSI: 5
[ 1.613401] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 1.613487] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.613530] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.613713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.613770] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 1.613842] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 1.613890] ehci_hcd 0000:00:10.3: irq 11, io mem 0xe3001000
[ 1.623917] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 1.623999] usb usb1: configuration #1 chosen from 1 choice
[ 1.624035] hub 1-0:1.0: USB hub found
[ 1.624046] hub 1-0:1.0: 6 ports detected
[ 1.624175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.624196] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.624258] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.624308] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.624330] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000c800
[ 1.624427] usb usb2: configuration #1 chosen from 1 choice
[ 1.624454] hub 2-0:1.0: USB hub found
[ 1.624464] hub 2-0:1.0: 2 ports detected
[ 1.624570] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.624617] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.624640] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000cc00
[ 1.624722] usb usb3: configuration #1 chosen from 1 choice
[ 1.624749] hub 3-0:1.0: USB hub found
[ 1.624758] hub 3-0:1.0: 2 ports detected
[ 1.624859] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.624905] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.624929] uhci_hcd 0000:00:10.2: irq 3, io base 0x0000d000
[ 1.625019] usb usb4: configuration #1 chosen from 1 choice
[ 1.625045] hub 4-0:1.0: USB hub found
[ 1.625056] hub 4-0:1.0: 2 ports detected
[ 1.625228] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 1.625551] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.625561] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.625698] mice: PS/2 mouse device common for all mice
[ 1.625807] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.625834] rtc0: alarms up to one day, 114 bytes nvram
[ 1.625926] device-mapper: uevent: version 1.0.3
[ 1.626071] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.626130] device-mapper: multipath: version 1.0.5 loaded
[ 1.626134] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.626248] EISA: Probing bus 0 at eisa.0
[ 1.626288] EISA: Detected 0 cards.
[ 1.626322] cpuidle: using governor ladder
[ 1.626325] cpuidle: using governor menu
[ 1.626893] TCP cubic registered
[ 1.626974] NET: Registered protocol family 10
[ 1.627406] lo: Disabled Privacy Extensions
[ 1.627728] NET: Registered protocol family 17
[ 1.627754] Bluetooth: L2CAP ver 2.11
[ 1.627756] Bluetooth: L2CAP socket layer initialized
[ 1.627761] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.627763] Bluetooth: SCO socket layer initialized
[ 1.627813] Bluetooth: RFCOMM socket layer initialized
[ 1.627824] Bluetooth: RFCOMM TTY layer initialized
[ 1.627826] Bluetooth: RFCOMM ver 1.10
[ 1.627871] IO APIC resources could be not be allocated.
[ 1.627958] Using IPI No-Shortcut mode
[ 1.628073] registered taskstats version 1
[ 1.628174] Magic number: 5:99:935
[ 1.628278] rtc_cmos 00:03: setting system clock to 2009-08-27 11:54:46 UTC (1251374086)
[ 1.628282] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.628284] EDD information not available.
[ 1.629081] Freeing unused kernel memory: 532k freed
[ 1.629199] Write protecting the kernel text: 4116k
[ 1.629241] Write protecting the kernel read-only data: 1528k
[ 1.658620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Local APIC not detected. Using dummy APIC emulation.
Sanırım bu yüzden o hatayı veriyor. Ancak neden verdiğini araştırıyorum
Teşekkürler. Peki biraz önce kernel satırına eklediğim, sistemi kapatmaya etki eder mi? Çünkü sistemi kapat dedim zaman "system halted" yazısı çıkıyor, fakat işlemci fanı ve diğer birimler çalışmaya devam ediyor?
Evet sistemi kapatmaya da etki eder. Zaten işe yaramadıysa silebilirsiniz eklediklerinizi.
Silmeme rağmen düzelmedi?
Ekleme: Tamam kernel satırına acpi=force ekleyince sistem kendini düzgün kapatmaya başladı. Ama açılıştaki IO Apic için çözümlere hala açığım. :)
Bu sorun kernel donanım uyumsuzluğuyla alakalı anladığım kadarıyla. Yeni gelecek kernel güncellemesiyle düzelebilir belki. Bu arada Mandriva Grub ekranında kernel parametreleri eklenebiliyormuş ve bu sorun için de hazır değer vardı.
Sanırım bir sonraki kernel güncellemesini beklemek en iyisi. Teşekkürler yardımlar için. Başlığı çözüldü olarak değiştiriyorum. :)