ubuntu PRO/Wireless 2200BG [Calexico2] Network parola hata

zenmate · 22 Aralık 2015 - 00:17:32

dmesg > dmesg_dosya

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-19-generic (buildd@lgw01-31) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #23-Ubuntu SMP Wed Nov 11 11:38:40 UTC 2015 (Ubuntu 4.2.0-19.23-generic 4.2.6)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004f7cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000004f7d0000-0x000000004f7efbff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004f7efc00-0x000000004f7fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000004f7fb000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq nx6110 (PY401ES#AB8)/3088, BIOS 68DTD Ver. F.03 02/25/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x4f7d0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF0000000 write-back
[    0.000000]   2 base 04F800000 mask FFF800000 uncachable
[    0.000000]   3 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 256MB, type WB
[    0.000000] reg 2, base: 1272MB, range: 8MB, type UC
[    0.000000] reg 3, base: 4175488KB, range: 128KB, type UC
[    0.000000] total RAM covered: 1272M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 256MB, type WB
[    0.000000] reg 2, base: 1272MB, range: 8MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[    0.000000]  [mem 0x20000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01cde000, 0x01cdefff] PGTABLE
[    0.000000] BRK [0x01cdf000, 0x01cdffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33f1c000-0x35f85fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE270 000014 (v00 HP    )
[    0.000000] ACPI: RSDT 0x000000004F7EFC84 000034 (v01 HP     099C     25020520 HP   00000001)
[    0.000000] ACPI: FACP 0x000000004F7EFC00 000084 (v02 HP     099C     00000002 HP   00000001)
[    0.000000] ACPI: DSDT 0x000000004F7EFD50 0078E5 (v01 HP     DAU00    00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000004F7FAE80 000040
[    0.000000] ACPI: APIC 0x000000004F7EFCB8 00005A (v01 HP     099C     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x000000004F7EFD14 00003C (v01 HP     099C     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000004F7F7635 000371 (v01 HP     HPQPpc   00001001 MSFT 0100000E)
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] 379MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000004f7cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000004f7cffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004f7cffff]
[    0.000000] On node 0 totalpages: 325486
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 97234 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0x4f800000-0x4fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x50000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f6cc4000 s47116 r0 d30708 u77824
[    0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 323256
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-19-generic root=/dev/mapper/ubuntu--mate--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0004f7d0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1239104K/1301944K available (7576K kernel code, 742K rwdata, 3020K rodata, 928K init, 796K bss, 62840K reserved, 0K cma-reserved, 388936K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b16000 - 0xc1bfe000   ( 928 kB)
                     .data : 0xc17665f0 - 0xc1b14b00   (3769 kB)
                     .text : 0xc1000000 - 0xc17665f0   (7577 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6832000 soft=f6834000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.038 MHz processor
[    0.008018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.07 BogoMIPS (lpj=6384152)
[    0.008026] pid_max: default: 32768 minimum: 301
[    0.008040] ACPI: Core revision 20150619
[    0.023023] ACPI: All ACPI Tables successfully acquired
[    0.023057] Security Framework initialized
[    0.023077] AppArmor: AppArmor initialized
[    0.023080] Yama: becoming mindful.
[    0.023181] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.023185] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.023578] Initializing cgroup subsys blkio
[    0.023586] Initializing cgroup subsys memory
[    0.023602] Initializing cgroup subsys devices
[    0.023607] Initializing cgroup subsys freezer
[    0.023613] Initializing cgroup subsys net_cls
[    0.023618] Initializing cgroup subsys perf_event
[    0.023624] Initializing cgroup subsys net_prio
[    0.023629] Initializing cgroup subsys hugetlb
[    0.023661] Disabled fast string operations
[    0.023672] mce: CPU supports 5 MCE banks
[    0.023684] CPU0: Thermal monitoring enabled (TM2)
[    0.023700] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.023703] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.037164] Freeing SMP alternatives memory: 28K (c1bfe000 - c1c05000)
[    0.044023] ftrace: allocating 30221 entries in 60 pages
[    0.056169] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.056641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)
[    0.100000] Performance Events: p6 PMU driver.
[    0.100000] ... version:                0
[    0.100000] ... bit width:              32
[    0.100000] ... generic registers:      2
[    0.100000] ... value mask:             00000000ffffffff
[    0.100000] ... max period:             000000007fffffff
[    0.100000] ... fixed-purpose events:   0
[    0.100000] ... event mask:             0000000000000003
[    0.100000] x86: Booted up 1 node, 1 CPUs
[    0.100000] smpboot: Total of 1 processors activated (3192.07 BogoMIPS)
[    0.100000] devtmpfs: initialized
[    0.100000] evm: security.selinux
[    0.100000] evm: security.SMACK64
[    0.100000] evm: security.SMACK64EXEC
[    0.100000] evm: security.SMACK64TRANSMUTE
[    0.100000] evm: security.SMACK64MMAP
[    0.100000] evm: security.ima
[    0.100000] evm: security.capability
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] PM: Registering ACPI NVS region [mem 0x4f7efc00-0x4f7fafff] (46080 bytes)
[    0.100000] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.100000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.100049] pinctrl core: initialized pinctrl subsystem
[    0.100256] RTC time: 22:11:30, date: 12/21/15
[    0.100470] NET: Registered protocol family 16
[    0.100860] EISA bus registered
[    0.100866] cpuidle: using governor ladder
[    0.100870] cpuidle: using governor menu
[    0.101032] ACPI: bus type PCI registered
[    0.101036] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.101161] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.101166] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.101168] PCI: Using MMCONFIG for extended config space
[    0.101170] PCI: Using configuration type 1 for base access
[    0.104433] ACPI: Added _OSI(Module Device)
[    0.104436] ACPI: Added _OSI(Processor Device)
[    0.104439] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.104442] ACPI: Added _OSI(Processor Aggregator Device)
[    0.130181] ACPI : EC: EC started
[    0.136103] ACPI: Interpreter enabled
[    0.136125] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.136133] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.136154] ACPI: (supports S0 S3 S4 S5)
[    0.136157] ACPI: Using IOAPIC for interrupt routing
[    0.136210] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.140828] ACPI: Power Resource [C19E] (on)
[    0.141184] ACPI: Power Resource [C1A6] (on)
[    0.141567] ACPI: Power Resource [C1AD] (on)
[    0.142442] ACPI: Power Resource [C1BD] (on)
[    0.150587] ACPI: Power Resource [C250] (off)
[    0.150679] ACPI: Power Resource [C251] (off)
[    0.150769] ACPI: Power Resource [C252] (off)
[    0.150864] ACPI: Power Resource [C253] (off)
[    0.157406] ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
[    0.157417] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.157426] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.163083] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.163087] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.163091] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.163095] acpi PNP0A08:00: host bridge window [mem 0x4f800000-0xfec00fff window] (ignored)
[    0.163099] acpi PNP0A08:00: host bridge window [mem 0xfec02000-0xffffffff window] (ignored)
[    0.163103] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff window] (ignored)
[    0.163106] PCI: root bus 00: using default resources
[    0.163407] PCI host bridge to bus 0000:00
[    0.163412] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.163416] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.163420] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.163433] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.163600] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[    0.163615] pci 0000:00:02.0: reg 0x10: [mem 0xd0400000-0xd047ffff]
[    0.163623] pci 0000:00:02.0: reg 0x14: [io  0x7000-0x7007]
[    0.163631] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.163638] pci 0000:00:02.0: reg 0x1c: [mem 0xd0480000-0xd04bffff]
[    0.163790] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[    0.163804] pci 0000:00:02.1: reg 0x10: [mem 0xd0500000-0xd057ffff]
[    0.164009] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.164068] pci 0000:00:1d.0: reg 0x20: [io  0x2000-0x201f]
[    0.164211] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.164297] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.164355] pci 0000:00:1d.1: reg 0x20: [io  0x2020-0x203f]
[    0.164492] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.164575] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.164633] pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
[    0.164770] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.164855] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.164912] pci 0000:00:1d.3: reg 0x20: [io  0x2060-0x207f]
[    0.165048] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.165142] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.165176] pci 0000:00:1d.7: reg 0x10: [mem 0xd0580000-0xd05803ff]
[    0.165261] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.165338] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.165424] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.165565] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.165653] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[    0.165681] pci 0000:00:1e.2: reg 0x10: [io  0x2100-0x21ff]
[    0.165694] pci 0000:00:1e.2: reg 0x14: [io  0x2200-0x223f]
[    0.165708] pci 0000:00:1e.2: reg 0x18: [mem 0xd0581000-0xd05811ff]
[    0.165721] pci 0000:00:1e.2: reg 0x1c: [mem 0xd0582000-0xd05820ff]
[    0.165774] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.165925] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[    0.165954] pci 0000:00:1e.3: reg 0x10: [io  0x2400-0x24ff]
[    0.165967] pci 0000:00:1e.3: reg 0x14: [io  0x2500-0x257f]
[    0.166039] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.166197] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.166312] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.166324] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.166331] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.166337] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0500-057f
[    0.166479] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[    0.166500] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.166513] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.166526] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.166539] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.166552] pci 0000:00:1f.1: reg 0x20: [io  0x2580-0x258f]
[    0.166578] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.166582] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.166585] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.166588] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.166872] pci 0000:02:04.0: [8086:4220] type 00 class 0x028000
[    0.166909] pci 0000:02:04.0: reg 0x10: [mem 0xd0000000-0xd0000fff]
[    0.167013] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[    0.167137] pci 0000:02:06.0: [104c:8031] type 02 class 0x060700
[    0.167173] pci 0000:02:06.0: reg 0x10: [mem 0xd0001000-0xd0001fff]
[    0.167205] pci 0000:02:06.0: supports D1 D2
[    0.167209] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.167334] pci 0000:02:06.2: [104c:8032] type 00 class 0x0c0010
[    0.167370] pci 0000:02:06.2: reg 0x10: [mem 0xd0002000-0xd00027ff]
[    0.167386] pci 0000:02:06.2: reg 0x14: [mem 0xd0004000-0xd0007fff]
[    0.167480] pci 0000:02:06.2: supports D1 D2
[    0.167484] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[    0.167616] pci 0000:02:0e.0: [14e4:170c] type 00 class 0x020000
[    0.167647] pci 0000:02:0e.0: reg 0x10: [mem 0xd000e000-0xd000ffff]
[    0.167732] pci 0000:02:0e.0: supports D1 D2
[    0.167736] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.167877] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.167887] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd03fffff]
[    0.167896] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.167900] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.167977] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.167985] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.167990] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.167997] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[    0.168004] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[    0.168015] pci_bus 0000:00: on NUMA node 0
[    0.169649] ACPI: PCI Interrupt Link [C0D7] (IRQs 10 *11)
[    0.169826] ACPI: PCI Interrupt Link [C0D8] (IRQs *10 11)
[    0.170000] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
[    0.170173] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[    0.170346] ACPI: PCI Interrupt Link [C0ED] (IRQs *10 11)
[    0.170519] ACPI: PCI Interrupt Link [C0EE] (IRQs 10 *11)
[    0.170693] ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11)
[    0.170853] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
[    0.171859] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.171917] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.172112] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.172116] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.172122] vgaarb: loaded
[    0.172125] vgaarb: bridge control possible 0000:00:02.0
[    0.172665] SCSI subsystem initialized
[    0.172731] libata version 3.00 loaded.
[    0.172789] ACPI: bus type USB registered
[    0.172833] usbcore: registered new interface driver usbfs
[    0.172854] usbcore: registered new interface driver hub
[    0.172878] usbcore: registered new device driver usb
[    0.173156] PCI: Using ACPI for IRQ routing
[    0.183082] PCI: pci_cache_line_size set to 64 bytes
[    0.183143] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.183146] e820: reserve RAM buffer [mem 0x4f7d0000-0x4fffffff]
[    0.183378] NetLabel: Initializing
[    0.183381] NetLabel:  domain hash size = 128
[    0.183383] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.183403] NetLabel:  unlabeled traffic allowed by default
[    0.183736] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.183746] hpet clockevent registered
[    0.183755] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.183762] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.183768] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.185070] clocksource: Switched to clocksource hpet
[    0.200299] AppArmor: AppArmor Filesystem Enabled
[    0.200482] pnp: PnP ACPI init
[    0.200803] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.200810] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.200815] system 00:00: [mem 0x00100000-0x4f7fffff] could not be reserved
[    0.200823] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.201374] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.201432] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.201497] pnp 00:03: Plug and Play ACPI device, IDs SYN0112 SYN0100 SYN0002 PNP0f13 (active)
[    0.201740] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.201746] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.201751] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.201756] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202705] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.202710] system 00:05: [io  0x1000-0x107f] could not be reserved
[    0.202715] system 00:05: [io  0x1100-0x113f] has been reserved
[    0.202719] system 00:05: [io  0x1200-0x121f] has been reserved
[    0.202724] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.202728] system 00:05: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.202733] system 00:05: [mem 0xfed20000-0xff41ffff] could not be reserved
[    0.202737] system 00:05: [mem 0xfed90000-0xfed9afff] has been reserved
[    0.202743] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.203116] system 00:06: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.203121] system 00:06: [mem 0xfec01000-0xfec01fff] has been reserved
[    0.203127] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.203146] pnp: PnP ACPI: found 7 devices
[    0.203156] PnPBIOS: Disabled by ACPI PNP
[    0.241377] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.241420] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.241424] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.241431] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.241444] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.241450] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.241455] pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.241468] pci 0000:00:1e.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.241476] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.241481] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.241485] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.241490] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.241494] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.241498] pci 0000:02:06.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.241502] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.241507] pci 0000:02:06.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.241515] pci 0000:02:06.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref]
[    0.241522] pci 0000:02:06.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[    0.241526] pci 0000:02:06.0: BAR 13: assigned [io  0x3000-0x30ff]
[    0.241530] pci 0000:02:06.0: BAR 14: assigned [io  0x3400-0x34ff]
[    0.241535] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.241538] pci 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[    0.241546] pci 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[    0.241553] pci 0000:02:06.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[    0.241560] pci 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff]
[    0.241567] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.241572] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.241580] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd03fffff]
[    0.241592] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.241596] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.241600] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.241604] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd03fffff]
[    0.241608] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.241611] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.241615] pci_bus 0000:03: resource 0 [io  0x3000-0x30ff]
[    0.241619] pci_bus 0000:03: resource 1 [io  0x3400-0x34ff]
[    0.241623] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[    0.241626] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff]
[    0.241699] NET: Registered protocol family 2
[    0.242058] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.242094] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.242157] TCP: Hash tables configured (established 8192 bind 8192)
[    0.242231] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.242249] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.242329] NET: Registered protocol family 1
[    0.242364] pci 0000:00:02.0: Video device with shadowed ROM
[    0.244174] PCI: CLS 64 bytes, default 64
[    0.244285] Trying to unpack rootfs image as initramfs...
[    1.337606] Freeing initrd memory: 33192K (f3f1c000 - f5f86000)
[    1.338036] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    1.338172] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.338371] Scanning for low memory corruption every 60 seconds
[    1.338958] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.338992] Initialise system trusted keyring
[    1.339043] audit: initializing netlink subsys (disabled)
[    1.339089] audit: type=2000 audit(1450735891.336:1): initialized
[    1.339624] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.343669] zpool: loaded
[    1.343673] zbud: loaded
[    1.343803] VFS: Disk quotas dquot_6.6.0
[    1.343893] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.344944] fuse init (API version 7.23)
[    1.345258] Key type big_key registered
[    1.345653] Key type asymmetric registered
[    1.345658] Asymmetric key parser 'x509' registered
[    1.345690] bounce: pool size: 64 pages
[    1.345770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.345821] io scheduler noop registered
[    1.345827] io scheduler deadline registered (default)
[    1.345901] io scheduler cfq registered
[    1.346137] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.346153] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.346232] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.346235] vesafb: scrolling: redraw
[    1.346238] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.346268] vesafb: framebuffer at 0xc0000000, mapped to 0xf8600000, using 3072k, total 3072k
[    1.346467] Console: switching to colour frame buffer device 128x48
[    1.346515] fb0: VESA VGA frame buffer device
[    1.346554] intel_idle: does not run on family 6 model 13
[    1.348137] ACPI: AC Adapter [C16B] (on-line)
[    1.348278] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.348286] ACPI: Sleep Button [C1E0]
[    1.348379] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.348431] ACPI: Lid Switch [C1E1]
[    1.348528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.348533] ACPI: Power Button [PWRF]
[    1.350379] tsc: Marking TSC unstable due to TSC halts in idle
[    1.350393] ACPI: acpi_idle registered with cpuidle
[    1.372217] thermal LNXTHERM:00: registered as thermal_zone0
[    1.372221] ACPI: Thermal Zone [TZ1] (72 C)
[    1.390310] thermal LNXTHERM:01: registered as thermal_zone1
[    1.390314] ACPI: Thermal Zone [TZ2] (49 C)
[    1.404536] thermal LNXTHERM:02: registered as thermal_zone2
[    1.404539] ACPI: Thermal Zone [TZ3] (32 C)
[    1.404932] GHES: HEST is not enabled!
[    1.405188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.407320] isapnp: Scanning for PnP cards...
[    1.414575] Linux agpgart interface v0.103
[    1.414678] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    1.414703] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.415628] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.459568] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.464703] brd: module loaded
[    1.466788] loop: module loaded
[    1.467098] ata_piix 0000:00:1f.1: version 2.13
[    1.468564] scsi host0: ata_piix
[    1.468777] scsi host1: ata_piix
[    1.468871] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2580 irq 14
[    1.468874] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2588 irq 15
[    1.469058] libphy: Fixed MDIO Bus: probed
[    1.469063] tun: Universal TUN/TAP device driver, 1.6
[    1.469065] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.469169] PPP generic driver version 2.4.2
[    1.469312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.469320] ehci-pci: EHCI PCI platform driver
[    1.469587] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.469599] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.469616] ehci-pci 0000:00:1d.7: debug port 1
[    1.473541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.473591] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0580000
[    1.473782] ata2: port disabled--ignoring
[    1.517373] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.517485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.517489] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.517493] usb usb1: Product: EHCI Host Controller
[    1.517496] usb usb1: Manufacturer: Linux 4.2.0-19-generic ehci_hcd
[    1.517500] usb usb1: SerialNumber: 0000:00:1d.7
[    1.517752] hub 1-0:1.0: USB hub found
[    1.517767] hub 1-0:1.0: 8 ports detected
[    1.518335] ehci-platform: EHCI generic platform driver
[    1.518356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.518362] ohci-pci: OHCI PCI platform driver
[    1.518386] ohci-platform: OHCI generic platform driver
[    1.518404] uhci_hcd: USB Universal Host Controller Interface driver
[    1.518611] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.518621] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.518630] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.518656] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
[    1.518732] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.518736] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.518740] usb usb2: Product: UHCI Host Controller
[    1.518743] usb usb2: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.518747] usb usb2: SerialNumber: 0000:00:1d.0
[    1.520100] hub 2-0:1.0: USB hub found
[    1.520113] hub 2-0:1.0: 2 ports detected
[    1.520889] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.520899] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.520908] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.520942] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002020
[    1.521019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.521023] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.521026] usb usb3: Product: UHCI Host Controller
[    1.521030] usb usb3: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.521033] usb usb3: SerialNumber: 0000:00:1d.1
[    1.521251] hub 3-0:1.0: USB hub found
[    1.521263] hub 3-0:1.0: 2 ports detected
[    1.521635] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.521645] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.521653] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.521685] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    1.521760] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.521764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.521767] usb usb4: Product: UHCI Host Controller
[    1.521771] usb usb4: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.521774] usb usb4: SerialNumber: 0000:00:1d.2
[    1.521983] hub 4-0:1.0: USB hub found
[    1.521995] hub 4-0:1.0: 2 ports detected
[    1.522382] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.522391] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.522401] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.522434] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00002060
[    1.522507] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.522511] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.522514] usb usb5: Product: UHCI Host Controller
[    1.522517] usb usb5: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.522521] usb usb5: SerialNumber: 0000:00:1d.3
[    1.522748] hub 5-0:1.0: USB hub found
[    1.522760] hub 5-0:1.0: 2 ports detected
[    1.523052] i8042: PNP: PS/2 Controller [PNP0303:C1BA,PNP0f13:C1BB] at 0x60,0x64 irq 1,12
[    1.524679] i8042: Detected active multiplexing controller, rev 1.1
[    1.525363] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.525371] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.525467] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.525533] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.525600] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.525887] mousedev: PS/2 mouse device common for all mice
[    1.526183] rtc_cmos 00:01: RTC can wake from S4
[    1.526388] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.526423] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.526441] i2c /dev entries driver
[    1.526566] device-mapper: uevent: version 1.0.3
[    1.526701] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.526748] platform eisa.0: Probing EISA bus 0
[    1.526808] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.526812] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.526817] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.526835] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.526843] platform eisa.0: EISA: Detected 0 cards
[    1.526872] cpufreq-nforce2: No nForce2 chipset.
[    1.526884] ledtrig-cpu: registered to indicate activity on CPUs
[    1.526904] PCCT header not found.
[    1.527383] NET: Registered protocol family 10
[    1.527856] NET: Registered protocol family 17
[    1.527877] Key type dns_resolver registered
[    1.528211] Using IPI No-Shortcut mode
[    1.528455] Loading compiled-in X.509 certificates
[    1.534927] Loaded X.509 cert 'Build time autogenerated kernel key: da99c1365ea7a9eee106ce16700ccbcac73f098e'
[    1.534957] registered taskstats version 1
[    1.534988] zswap: loading zswap
[    1.534992] zswap: using zbud pool
[    1.535000] zswap: using lzo compressor
[    1.539198] Key type trusted registered
[    1.542333] ACPI: Battery Slot [C16D] (battery present)
[    1.542491] ACPI: Battery Slot [C16C] (battery absent)
[    1.590217] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.590439] Key type encrypted registered
[    1.590450] AppArmor: AppArmor sha1 policy hashing enabled
[    1.590456] ima: No TPM chip found, activating TPM-bypass!
[    1.590497] evm: HMAC attrs: 0x1
[    1.590850]   Magic number: 11:566:199
[    1.591029] rtc_cmos 00:01: setting system clock to 2015-12-21 22:11:31 UTC (1450735891)
[    1.594207] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.594210] EDD information not available.
[    1.594342] PM: Hibernation image not present or could not be loaded.
[    1.770467] isapnp: No Plug & Play device found
[    1.770481] ata1.00: ATA-6: TOSHIBA MK4026GAX, PA103G, max UDMA/100
[    1.770485] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.770494] ata1.01: ATAPI: DV-28E-C, A.4L, max MWDMA2
[    1.776398] ata1.00: configured for UDMA/100
[    1.792325] ata1.01: configured for MWDMA2
[    1.793615] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4026GA 3G   PQ: 0 ANSI: 5
[    1.793968] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.799271] scsi 0:0:1:0: CD-ROM            TEAC     DV-28E-C         A.4L PQ: 0 ANSI: 5
[    1.799359] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.821270] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    1.821274] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.821442] sd 0:0:0:0: [sda] Write Protect is off
[    1.821447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.821486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.821842] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.822094] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.897632]  sda: sda1 sda2 < sda5 >
[    1.898128] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.898631] Freeing unused kernel memory: 928K (c1b16000 - c1bfe000)
[    1.898719] Write protecting the kernel text: 7580k
[    1.898761] Write protecting the kernel read-only data: 3024k
[    1.898763] NX-protecting the kernel data: 4708k
[    1.917900] random: udevadm urandom read with 13 bits of entropy available
[    2.049136] ACPI: Video Device [C054] (multi-head: yes  rom: no  post: no)
[    2.049487] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.078932] wmi: Mapper loaded
[    2.216664] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    2.241372] [drm] Initialized drm 1.1.0 20060810
[    2.276142] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[    2.276154] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    2.276162] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    2.276169] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    2.360180] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1701863c7b5, max_idle_ns: 440795278530 ns
[    2.372199] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[    2.372262] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    2.392811] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:12:79:c6:8e:5e
[    2.428216] usb 2-1: New USB device found, idVendor=045e, idProduct=009d
[    2.428223] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.428228] usb 2-1: Product: Microsoft Wireless Optical Desktop® 2.10
[    2.428231] usb 2-1: Manufacturer: Microsft
[    2.428524] firewire_ohci 0000:02:06.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.452941] [drm] Memory usable by graphics device = 256M
[    2.452950] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    2.452953] fb: switching to inteldrmfb from VESA VGA
[    2.453009] Console: switching to colour dummy device 80x25
[    2.454050] [drm] Replacing VGA console driver
[    2.457426] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.457432] [drm] Driver supports precise vblank timestamp query.
[    2.457558] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.461825] hidraw: raw HID events driver (C) Jiri Kosina
[    2.588412] usbcore: registered new interface driver usbhid
[    2.588418] usbhid: USB HID core driver
[    2.605571] input: Microsft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:045E:009D.0001/input/input13
[    2.660471] microsoft 0003:045E:009D.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1/input0
[    2.673876] input: Microsft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:045E:009D.0002/input/input14
[    2.728756] microsoft 0003:045E:009D.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1/input1
[    2.835538] [drm] initialized overlay support
[    2.835782] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[    2.928192] firewire_core 0000:02:06.2: created device fw0: GUID 718b500029c115a6, S400
[    3.010186] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0/0x0, board id: 0, fw id: 35334
[    3.010196] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    3.047323] fbcon: inteldrmfb (fb0) is primary device
[    3.047769] Console: switching to colour frame buffer device 128x48
[    3.047819] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.047823] i915 0000:00:02.0: registered panic notifier
[    3.064495] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[    4.069213] random: nonblocking pool is initialized
[    6.654097] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    7.853631] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    8.034641] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    8.034832] systemd[1]: Detected architecture x86.
[    8.050000] systemd[1]: Set hostname to <kevin-HP-Compaq-nx6110-PY401ES-AB8>.
[    8.708041] systemd[1]: NetworkManager.service: Cannot add dependency job, ignoring: Unit NetworkManager.service failed to load: No such file or directory.
[    8.709325] systemd[1]: Reached target User and Group Name Lookups.
[    8.709437] systemd[1]: Reached target Encrypted Volumes.
[    8.709705] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.709772] systemd[1]: Created slice Root Slice.
[    8.709835] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.709994] systemd[1]: Created slice System Slice.
[    8.710149] systemd[1]: Listening on Journal Audit Socket.
[    8.710274] systemd[1]: Created slice User and Session Slice.
[    8.710322] systemd[1]: Listening on udev Kernel Socket.
[    8.710382] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.710438] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.710595] systemd[1]: Created slice system-getty.slice.
[    8.710622] systemd[1]: Reached target Remote File Systems (Pre).
[    8.710762] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.710788] systemd[1]: Reached target Slices.
[    8.711761] systemd[1]: Starting Increase datagram queue length...
[    8.711832] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.711941] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.712060] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.712149] systemd[1]: Listening on udev Control Socket.
[    8.712226] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.712317] systemd[1]: Listening on Journal Socket.
[    8.713274] systemd[1]: Starting udev Coldplug all Devices...
[    8.714219] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.715217] systemd[1]: Mounting Huge Pages File System...
[    8.879264] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.880276] systemd[1]: Started Braille Device Support.
[    8.883678] systemd[1]: Starting Setup Virtual Console...
[    8.884661] systemd[1]: Starting Uncomplicated firewall...
[    8.885619] systemd[1]: Mounting POSIX Message Queue File System...
[    8.886650] systemd[1]: Started Read required files in advance.
[    9.177055] systemd[1]: Starting Load Kernel Modules...
[    9.180948] systemd[1]: Mounting Debug File System...
[    9.182815] systemd[1]: Started Setup Virtual Console.
[    9.266931] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.268250] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.367200] systemd[1]: Started Uncomplicated firewall.
[    9.580882] systemd[1]: Mounted Huge Pages File System.
[    9.580959] systemd[1]: Mounted Debug File System.
[    9.580997] systemd[1]: Mounted POSIX Message Queue File System.
[    9.581389] systemd[1]: Started Increase datagram queue length.
[    9.581993] systemd[1]: Listening on Syslog Socket.
[    9.583013] systemd[1]: Starting Journal Service...
[    9.699670] systemd[1]: Started udev Coldplug all Devices.
[   10.381746] lp: driver loaded but no devices found
[   10.462869] ppdev: user-space parallel port driver
[   11.183156] systemd[1]: Started Journal Service.
[   11.544867] lib80211: common routines for IEEE802.11 drivers
[   11.544873] lib80211_crypt: registered algorithm 'NULL'
[   11.625594] libipw: 802.11 data/management/control stack, git-1.1.13
[   11.625600] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   11.681935] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   11.681940] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   11.682228] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   12.101918] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[   14.054189] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   14.741991] systemd-journald[223]: Received request to flush runtime journal from PID 1
[   15.703919] intel_rng: FWH not detected
[   15.720371] NET: Registered protocol family 23
[   15.773191] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:099c]
[   15.773216] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   15.773223] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[   15.773227] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   15.773234] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[   15.923582] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000103B (\_SB_.C002.C003.C085) (20150619/utaddress-254)
[   15.923596] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.923602] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C096) (20150619/utaddress-254)
[   15.923609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.923612] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C096) (20150619/utaddress-254)
[   15.923619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.923621] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.012816] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[   16.012826] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   16.012833] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   16.012846] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[   16.012850] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[   16.014146]  excluding 0x3000-0x30ff 0x3400-0x34ff
[   16.019838] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd03fffff]
[   16.019844] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd03fffff:
[   16.019849]  excluding 0xd0000000-0xd003ffff
[   17.113637] ipw2200 0000:02:04.0 wlp2s4: renamed from eth1
[   17.597420] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   17.598425]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   17.599159] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   17.599543]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   17.599898] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   17.601228]  clean
[   17.601256] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   17.601892]  clean
[   17.601919] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   17.601926]  excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[   17.601962] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   17.601982]  clean
[   17.602003] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   17.602022]  clean
[   17.602044] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   17.602699]  clean
[   17.686279] input: HP WMI hotkeys as /devices/virtual/input/input16
[   18.288044] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55042 usecs (2652 samples)
[   18.288052] snd_intel8x0 0000:00:1e.2: clocking to 48000
[   19.601502] cfg80211: World regulatory domain updated:
[   19.601512] cfg80211:  DFS Master region: unset
[   19.601516] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   19.601520] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   19.601524] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   19.601527] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   19.601531] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   19.601535] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   19.601539] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   19.601542] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   19.601545] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   21.925907] Adding 1298428k swap on /dev/mapper/ubuntu--mate--vg-swap_1.  Priority:-1 extents:1 across:1298428k FS
[   29.550914] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   29.576570] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   37.564357] audit: type=1400 audit(1450735927.472:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=496 comm="apparmor_parser"
[   37.564374] audit: type=1400 audit(1450735927.472:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=496 comm="apparmor_parser"
[   37.569251] audit: type=1400 audit(1450735927.476:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=496 comm="apparmor_parser"
[   37.569267] audit: type=1400 audit(1450735927.476:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
[   37.569278] audit: type=1400 audit(1450735927.476:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=496 comm="apparmor_parser"
[   37.569288] audit: type=1400 audit(1450735927.476:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
[   37.572485] audit: type=1400 audit(1450735927.480:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=496 comm="apparmor_parser"
[   37.577180] audit: type=1400 audit(1450735927.484:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=496 comm="apparmor_parser"
[   37.577195] audit: type=1400 audit(1450735927.484:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=496 comm="apparmor_parser"
[   37.577205] audit: type=1400 audit(1450735927.484:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=496 comm="apparmor_parser"
[   44.661939] Non-volatile memory driver v1.3
[   48.080913] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.816221] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   51.816229] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   51.816451] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   51.927024] b44 ssb0:0 eth0: powering down PHY
[   51.944976] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.816243] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   54.816253] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   54.816385] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   62.464716] ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
[   93.178839] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[   93.317823] b44 ssb0:0 eth0: powering down PHY
[   93.331200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   93.388374] b44 ssb0:0 eth0: powering down PHY
[   93.496695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   95.226706] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[   95.243762] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[   95.417997] b44 ssb0:0 eth0: powering down PHY
[   95.427364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   98.816224] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   98.816236] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   98.816343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  117.999473] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  118.276018] b44 ssb0:0 eth0: powering down PHY
[  118.291198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  118.659037] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  118.727151] b44 ssb0:0 eth0: powering down PHY
[  118.737367] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  119.014360] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  119.264968] b44 ssb0:0 eth0: powering down PHY
[  119.275369] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  121.287037] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s4: link becomes ready
[  122.816220] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  122.816234] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  122.816350] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  129.254616] ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
[  153.175177] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  153.198300] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  153.472015] b44 ssb0:0 eth0: powering down PHY
[  153.487392] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  153.614144] b44 ssb0:0 eth0: powering down PHY
[  153.794407] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  156.816220] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  156.816231] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  156.816343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Kod Seç

ls -l /lib/firmware/ipw*

Kod Seç

kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$ ls -l /lib/firmware/ipw*
-rw-r--r-- 1 root root 191154 Ara 17 23:11 /lib/firmware/ipw2200-bss.fw
-rw-r--r-- 1 root root 185428 Ara 17 23:11 /lib/firmware/ipw2200-ibss.fw
-rw-r--r-- 1 root root 187836 Ara 17 23:11 /lib/firmware/ipw2200-sniffer.fw
kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$

heartsmagic · 22 Aralık 2015 - 00:40:04

Tamam firmware hatasından kurtulmuşuz ama bu sefer de birilerinin 3.1 yönündeki şikayetlerini gördüm. 3.0'a bir düşürelim bakalım fakat sendeki sorun bağlanamama sorunu, insanlar kararsızlık yaşıyorlar. Haliyle çözüm yolunda ümidim az fakat denemekten zarar gelmez. Şunları uygula lütfen:

Kod Seç

sudo mv /lib/firmware/ipw* $HOME
wget http://pkgs.fedoraproject.org/repo/pkgs/ipw2200-firmware/ipw2200-fw-3.0.tgz/34a5ed3702006f5470ebfd513e04d9eb/ipw2200-fw-3.0.tgz
tar xvf ipw2200-fw-3.0.tgz
sudo mv ipw2200-fw-3.0/ipw* /lib/firmware/

Ardından sistemi yeniden başlatıp bir önceki iletimdeki çıktıları buraya geç lütfen.

zenmate · 22 Aralık 2015 - 23:57:05

Kod Seç

dmesg > dmesg_dosya

Kod Seç

kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$ dmesg > dmesg_dosya
kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$

Kod Seç

ls -l /lib/firmware/ipw*

Kod Seç

kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$ ls -l /lib/firmware/ipw*
-rw-r--r-- 1 kevin kevin 191142 Mar  7  2006 /lib/firmware/ipw2200-bss.fw
-rw-r--r-- 1 kevin kevin 185660 Mar  7  2006 /lib/firmware/ipw2200-ibss.fw
-rw-r--r-- 1 kevin kevin 187836 Mar  7  2006 /lib/firmware/ipw2200-sniffer.fw
kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$

wifi bağlanmadı bağlantı hatası : geçersiz parola dedi

heartsmagic · 23 Aralık 2015 - 00:00:33

dmesg_dosya isimli dosyanın içeriğini geçmemişsin buraya, geçersen güzel olur.
Ağ parolasında Türkçe karakter vs. var mı? Gerçi Türkçe karakter de ayarlanabiliyor muydu onu da hatırlamıyorum.
Şu an Wicd mi Ağ Yöneticisi mi kullanıyorsun?

zenmate · 23 Aralık 2015 - 00:19:24

Alıntı Yapdmesg_dosya isimli dosyanın içeriğini geçmemişsin buraya, geçersen güzel olur.

geçtim ama komuta hiç birşey vermedi

heartsmagic · 23 Aralık 2015 - 00:50:04

Komut çıktı vermez zaten, dosya oluşur komutu verdiğin yerde söylediğim gibi. İsmi dmesg_dosya, ev dizinindedir muhtemelen. Onu açıp içeriğini buraya aktaracaksın daha önce yaptığın gibi.
Ağa bağlanmaya çalışıp hata aldıktan sonra:

Kod Seç

gedit /var/log/wicd
ile açılan dosyanın da içeriğini buraya geç lütfen.

zenmate · 23 Aralık 2015 - 07:59:33

Kod Seç

dmesg > dmesg_dosya

Kod Seç

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-19-generic (buildd@lgw01-31) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #23-Ubuntu SMP Wed Nov 11 11:38:40 UTC 2015 (Ubuntu 4.2.0-19.23-generic 4.2.6)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004f7cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000004f7d0000-0x000000004f7efbff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004f7efc00-0x000000004f7fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000004f7fb000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq nx6110 (PY401ES#AB8)/3088, BIOS 68DTD Ver. F.03 02/25/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x4f7d0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF0000000 write-back
[    0.000000]   2 base 04F800000 mask FFF800000 uncachable
[    0.000000]   3 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 256MB, type WB
[    0.000000] reg 2, base: 1272MB, range: 8MB, type UC
[    0.000000] reg 3, base: 4175488KB, range: 128KB, type UC
[    0.000000] total RAM covered: 1272M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 256MB, type WB
[    0.000000] reg 2, base: 1272MB, range: 8MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[    0.000000]  [mem 0x20000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01cde000, 0x01cdefff] PGTABLE
[    0.000000] BRK [0x01cdf000, 0x01cdffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33f1c000-0x35f85fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE270 000014 (v00 HP    )
[    0.000000] ACPI: RSDT 0x000000004F7EFC84 000034 (v01 HP     099C     25020520 HP   00000001)
[    0.000000] ACPI: FACP 0x000000004F7EFC00 000084 (v02 HP     099C     00000002 HP   00000001)
[    0.000000] ACPI: DSDT 0x000000004F7EFD50 0078E5 (v01 HP     DAU00    00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000004F7FAE80 000040
[    0.000000] ACPI: APIC 0x000000004F7EFCB8 00005A (v01 HP     099C     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x000000004F7EFD14 00003C (v01 HP     099C     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000004F7F7635 000371 (v01 HP     HPQPpc   00001001 MSFT 0100000E)
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] 379MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000004f7cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000004f7cffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000004f7cffff]
[    0.000000] On node 0 totalpages: 325486
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 97234 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0x4f800000-0x4fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x50000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f6cc4000 s47116 r0 d30708 u77824
[    0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 323256
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-19-generic root=/dev/mapper/ubuntu--mate--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0004f7d0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1239104K/1301944K available (7576K kernel code, 742K rwdata, 3020K rodata, 928K init, 796K bss, 62840K reserved, 0K cma-reserved, 388936K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b16000 - 0xc1bfe000   ( 928 kB)
                     .data : 0xc17665f0 - 0xc1b14b00   (3769 kB)
                     .text : 0xc1000000 - 0xc17665f0   (7577 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6832000 soft=f6834000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1595.986 MHz processor
[    0.012018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.97 BogoMIPS (lpj=6383944)
[    0.012025] pid_max: default: 32768 minimum: 301
[    0.012044] ACPI: Core revision 20150619
[    0.027881] ACPI: All ACPI Tables successfully acquired
[    0.027932] Security Framework initialized
[    0.027957] AppArmor: AppArmor initialized
[    0.027960] Yama: becoming mindful.
[    0.028076] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.028080] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.028439] Initializing cgroup subsys blkio
[    0.028446] Initializing cgroup subsys memory
[    0.028460] Initializing cgroup subsys devices
[    0.028465] Initializing cgroup subsys freezer
[    0.028471] Initializing cgroup subsys net_cls
[    0.028476] Initializing cgroup subsys perf_event
[    0.028482] Initializing cgroup subsys net_prio
[    0.028487] Initializing cgroup subsys hugetlb
[    0.028514] Disabled fast string operations
[    0.028525] mce: CPU supports 5 MCE banks
[    0.028536] CPU0: Thermal monitoring enabled (TM2)
[    0.028550] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.028553] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.041981] Freeing SMP alternatives memory: 28K (c1bfe000 - c1c05000)
[    0.048023] ftrace: allocating 30221 entries in 60 pages
[    0.064169] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.064645] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.108000] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.60GHz (fam: 06, model: 0d, stepping: 08)
[    0.108000] Performance Events: p6 PMU driver.
[    0.108000] ... version:                0
[    0.108000] ... bit width:              32
[    0.108000] ... generic registers:      2
[    0.108000] ... value mask:             00000000ffffffff
[    0.108000] ... max period:             000000007fffffff
[    0.108000] ... fixed-purpose events:   0
[    0.108000] ... event mask:             0000000000000003
[    0.108000] x86: Booted up 1 node, 1 CPUs
[    0.108000] smpboot: Total of 1 processors activated (3191.97 BogoMIPS)
[    0.108000] devtmpfs: initialized
[    0.108000] evm: security.selinux
[    0.108000] evm: security.SMACK64
[    0.108000] evm: security.SMACK64EXEC
[    0.108000] evm: security.SMACK64TRANSMUTE
[    0.108000] evm: security.SMACK64MMAP
[    0.108000] evm: security.ima
[    0.108000] evm: security.capability
[    0.108000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.108000] PM: Registering ACPI NVS region [mem 0x4f7efc00-0x4f7fafff] (46080 bytes)
[    0.108000] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.108000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108054] pinctrl core: initialized pinctrl subsystem
[    0.108262] RTC time:  5:25:49, date: 12/23/15
[    0.108476] NET: Registered protocol family 16
[    0.108865] EISA bus registered
[    0.108872] cpuidle: using governor ladder
[    0.108876] cpuidle: using governor menu
[    0.109038] ACPI: bus type PCI registered
[    0.109042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.109166] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.109171] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.109173] PCI: Using MMCONFIG for extended config space
[    0.109176] PCI: Using configuration type 1 for base access
[    0.112438] ACPI: Added _OSI(Module Device)
[    0.112442] ACPI: Added _OSI(Processor Device)
[    0.112444] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.112447] ACPI: Added _OSI(Processor Aggregator Device)
[    0.138189] ACPI : EC: EC started
[    0.144104] ACPI: Interpreter enabled
[    0.144126] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.144134] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.144155] ACPI: (supports S0 S3 S4 S5)
[    0.144158] ACPI: Using IOAPIC for interrupt routing
[    0.144210] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.148325] ACPI: Power Resource [C19E] (on)
[    0.148681] ACPI: Power Resource [C1A6] (on)
[    0.149063] ACPI: Power Resource [C1AD] (on)
[    0.149937] ACPI: Power Resource [C1BD] (on)
[    0.158084] ACPI: Power Resource [C250] (off)
[    0.158176] ACPI: Power Resource [C251] (off)
[    0.158266] ACPI: Power Resource [C252] (off)
[    0.158361] ACPI: Power Resource [C253] (off)
[    0.164901] ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
[    0.164912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.164921] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.170576] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.170580] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.170584] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.170588] acpi PNP0A08:00: host bridge window [mem 0x4f800000-0xfec00fff window] (ignored)
[    0.170592] acpi PNP0A08:00: host bridge window [mem 0xfec02000-0xffffffff window] (ignored)
[    0.170595] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff window] (ignored)
[    0.170598] PCI: root bus 00: using default resources
[    0.170899] PCI host bridge to bus 0000:00
[    0.170905] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.170909] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.170912] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.170926] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.171092] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[    0.171108] pci 0000:00:02.0: reg 0x10: [mem 0xd0400000-0xd047ffff]
[    0.171116] pci 0000:00:02.0: reg 0x14: [io  0x7000-0x7007]
[    0.171123] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.171131] pci 0000:00:02.0: reg 0x1c: [mem 0xd0480000-0xd04bffff]
[    0.171283] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[    0.171297] pci 0000:00:02.1: reg 0x10: [mem 0xd0500000-0xd057ffff]
[    0.171500] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.171558] pci 0000:00:1d.0: reg 0x20: [io  0x2000-0x201f]
[    0.171701] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.171787] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.171845] pci 0000:00:1d.1: reg 0x20: [io  0x2020-0x203f]
[    0.171982] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.172068] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.172126] pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
[    0.172262] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.172347] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.172405] pci 0000:00:1d.3: reg 0x20: [io  0x2060-0x207f]
[    0.172541] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.172635] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.172669] pci 0000:00:1d.7: reg 0x10: [mem 0xd0580000-0xd05803ff]
[    0.172755] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.172831] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.172918] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.173058] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.173146] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[    0.173174] pci 0000:00:1e.2: reg 0x10: [io  0x2100-0x21ff]
[    0.173187] pci 0000:00:1e.2: reg 0x14: [io  0x2200-0x223f]
[    0.173200] pci 0000:00:1e.2: reg 0x18: [mem 0xd0581000-0xd05811ff]
[    0.173213] pci 0000:00:1e.2: reg 0x1c: [mem 0xd0582000-0xd05820ff]
[    0.173267] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.173417] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[    0.173446] pci 0000:00:1e.3: reg 0x10: [io  0x2400-0x24ff]
[    0.173459] pci 0000:00:1e.3: reg 0x14: [io  0x2500-0x257f]
[    0.173531] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.173690] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.173804] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.173816] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.173823] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.173829] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0500-057f
[    0.173971] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[    0.173992] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.174005] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.174018] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.174031] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.174044] pci 0000:00:1f.1: reg 0x20: [io  0x2580-0x258f]
[    0.174071] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.174074] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.174078] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.174081] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.174365] pci 0000:02:04.0: [8086:4220] type 00 class 0x028000
[    0.174401] pci 0000:02:04.0: reg 0x10: [mem 0xd0000000-0xd0000fff]
[    0.174506] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[    0.174630] pci 0000:02:06.0: [104c:8031] type 02 class 0x060700
[    0.174666] pci 0000:02:06.0: reg 0x10: [mem 0xd0001000-0xd0001fff]
[    0.174698] pci 0000:02:06.0: supports D1 D2
[    0.174702] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.174827] pci 0000:02:06.2: [104c:8032] type 00 class 0x0c0010
[    0.174862] pci 0000:02:06.2: reg 0x10: [mem 0xd0002000-0xd00027ff]
[    0.174878] pci 0000:02:06.2: reg 0x14: [mem 0xd0004000-0xd0007fff]
[    0.174973] pci 0000:02:06.2: supports D1 D2
[    0.174977] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[    0.175111] pci 0000:02:0e.0: [14e4:170c] type 00 class 0x020000
[    0.175140] pci 0000:02:0e.0: reg 0x10: [mem 0xd000e000-0xd000ffff]
[    0.175226] pci 0000:02:0e.0: supports D1 D2
[    0.175229] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.175370] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.175379] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd03fffff]
[    0.175389] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.175393] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.175470] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.175478] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.175483] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.175490] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[    0.175495] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[    0.175506] pci_bus 0000:00: on NUMA node 0
[    0.177145] ACPI: PCI Interrupt Link [C0D7] (IRQs 10 *11)
[    0.177322] ACPI: PCI Interrupt Link [C0D8] (IRQs *10 11)
[    0.177496] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
[    0.177670] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[    0.177843] ACPI: PCI Interrupt Link [C0ED] (IRQs *10 11)
[    0.178016] ACPI: PCI Interrupt Link [C0EE] (IRQs 10 *11)
[    0.178189] ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11)
[    0.178350] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
[    0.179357] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.179415] ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.179605] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.179609] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.179615] vgaarb: loaded
[    0.179618] vgaarb: bridge control possible 0000:00:02.0
[    0.180164] SCSI subsystem initialized
[    0.180229] libata version 3.00 loaded.
[    0.180286] ACPI: bus type USB registered
[    0.180330] usbcore: registered new interface driver usbfs
[    0.180351] usbcore: registered new interface driver hub
[    0.180375] usbcore: registered new device driver usb
[    0.180654] PCI: Using ACPI for IRQ routing
[    0.190576] PCI: pci_cache_line_size set to 64 bytes
[    0.190636] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.190640] e820: reserve RAM buffer [mem 0x4f7d0000-0x4fffffff]
[    0.190871] NetLabel: Initializing
[    0.190874] NetLabel:  domain hash size = 128
[    0.190876] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.190896] NetLabel:  unlabeled traffic allowed by default
[    0.191230] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.191239] hpet clockevent registered
[    0.191248] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.191255] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.191261] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.193069] clocksource: Switched to clocksource hpet
[    0.208302] AppArmor: AppArmor Filesystem Enabled
[    0.208480] pnp: PnP ACPI init
[    0.208801] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.208808] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.208813] system 00:00: [mem 0x00100000-0x4f7fffff] could not be reserved
[    0.208821] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.209372] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.209430] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.209495] pnp 00:03: Plug and Play ACPI device, IDs SYN0112 SYN0100 SYN0002 PNP0f13 (active)
[    0.209739] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.209745] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.209750] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.209756] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.210703] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.210709] system 00:05: [io  0x1000-0x107f] could not be reserved
[    0.210713] system 00:05: [io  0x1100-0x113f] has been reserved
[    0.210717] system 00:05: [io  0x1200-0x121f] has been reserved
[    0.210722] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.210727] system 00:05: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.210731] system 00:05: [mem 0xfed20000-0xff41ffff] could not be reserved
[    0.210736] system 00:05: [mem 0xfed90000-0xfed9afff] has been reserved
[    0.210741] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.211115] system 00:06: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.211120] system 00:06: [mem 0xfec01000-0xfec01fff] has been reserved
[    0.211126] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.211145] pnp: PnP ACPI: found 7 devices
[    0.211155] PnPBIOS: Disabled by ACPI PNP
[    0.249371] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.249415] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.249419] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.249426] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.249439] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.249444] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.249449] pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.249461] pci 0000:00:1e.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.249470] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.249475] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.249479] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.249484] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.249488] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.249492] pci 0000:02:06.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.249496] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.249501] pci 0000:02:06.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.249510] pci 0000:02:06.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref]
[    0.249517] pci 0000:02:06.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[    0.249521] pci 0000:02:06.0: BAR 13: assigned [io  0x3000-0x30ff]
[    0.249525] pci 0000:02:06.0: BAR 14: assigned [io  0x3400-0x34ff]
[    0.249529] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.249533] pci 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[    0.249540] pci 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[    0.249547] pci 0000:02:06.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[    0.249554] pci 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff]
[    0.249561] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.249566] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.249574] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd03fffff]
[    0.249587] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.249591] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.249595] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.249598] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd03fffff]
[    0.249602] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.249606] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.249610] pci_bus 0000:03: resource 0 [io  0x3000-0x30ff]
[    0.249613] pci_bus 0000:03: resource 1 [io  0x3400-0x34ff]
[    0.249617] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[    0.249621] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff]
[    0.249695] NET: Registered protocol family 2
[    0.250054] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.250090] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.250152] TCP: Hash tables configured (established 8192 bind 8192)
[    0.250228] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.250246] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.250327] NET: Registered protocol family 1
[    0.250362] pci 0000:00:02.0: Video device with shadowed ROM
[    0.252175] PCI: CLS 64 bytes, default 64
[    0.252285] Trying to unpack rootfs image as initramfs...
[    1.345577] Freeing initrd memory: 33192K (f3f1c000 - f5f86000)
[    1.346007] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    1.346141] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.346340] Scanning for low memory corruption every 60 seconds
[    1.346927] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.346961] Initialise system trusted keyring
[    1.347011] audit: initializing netlink subsys (disabled)
[    1.347059] audit: type=2000 audit(1450848349.344:1): initialized
[    1.347594] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.351638] zpool: loaded
[    1.351642] zbud: loaded
[    1.351772] VFS: Disk quotas dquot_6.6.0
[    1.351862] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.352914] fuse init (API version 7.23)
[    1.353229] Key type big_key registered
[    1.353623] Key type asymmetric registered
[    1.353628] Asymmetric key parser 'x509' registered
[    1.353660] bounce: pool size: 64 pages
[    1.353739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.353790] io scheduler noop registered
[    1.353795] io scheduler deadline registered (default)
[    1.353870] io scheduler cfq registered
[    1.354107] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.354122] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.354200] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.354202] vesafb: scrolling: redraw
[    1.354206] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.354236] vesafb: framebuffer at 0xc0000000, mapped to 0xf8600000, using 3072k, total 3072k
[    1.354433] Console: switching to colour frame buffer device 128x48
[    1.354481] fb0: VESA VGA frame buffer device
[    1.354519] intel_idle: does not run on family 6 model 13
[    1.356184] ACPI: AC Adapter [C16B] (on-line)
[    1.356324] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.356332] ACPI: Sleep Button [C1E0]
[    1.356425] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.356477] ACPI: Lid Switch [C1E1]
[    1.356573] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.356578] ACPI: Power Button [PWRF]
[    1.358422] tsc: Marking TSC unstable due to TSC halts in idle
[    1.358436] ACPI: acpi_idle registered with cpuidle
[    1.379663] thermal LNXTHERM:00: registered as thermal_zone0
[    1.379667] ACPI: Thermal Zone [TZ1] (49 C)
[    1.397759] thermal LNXTHERM:01: registered as thermal_zone1
[    1.397762] ACPI: Thermal Zone [TZ2] (24 C)
[    1.411559] thermal LNXTHERM:02: registered as thermal_zone2
[    1.411563] ACPI: Thermal Zone [TZ3] (25 C)
[    1.411956] GHES: HEST is not enabled!
[    1.412236] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.414287] isapnp: Scanning for PnP cards...
[    1.465121] Linux agpgart interface v0.103
[    1.465225] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    1.465250] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.466191] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.466418] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.471730] brd: module loaded
[    1.473848] loop: module loaded
[    1.474156] ata_piix 0000:00:1f.1: version 2.13
[    1.475616] scsi host0: ata_piix
[    1.475806] scsi host1: ata_piix
[    1.475900] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2580 irq 14
[    1.475903] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2588 irq 15
[    1.476109] libphy: Fixed MDIO Bus: probed
[    1.476114] tun: Universal TUN/TAP device driver, 1.6
[    1.476116] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.476230] PPP generic driver version 2.4.2
[    1.476374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.476382] ehci-pci: EHCI PCI platform driver
[    1.476606] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.476618] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.476636] ehci-pci 0000:00:1d.7: debug port 1
[    1.480549] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.480595] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0580000
[    1.480788] ata2: port disabled--ignoring
[    1.524380] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.524491] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.524495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.524499] usb usb1: Product: EHCI Host Controller
[    1.524502] usb usb1: Manufacturer: Linux 4.2.0-19-generic ehci_hcd
[    1.524506] usb usb1: SerialNumber: 0000:00:1d.7
[    1.524758] hub 1-0:1.0: USB hub found
[    1.524773] hub 1-0:1.0: 8 ports detected
[    1.525341] ehci-platform: EHCI generic platform driver
[    1.525362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.525369] ohci-pci: OHCI PCI platform driver
[    1.525392] ohci-platform: OHCI generic platform driver
[    1.525410] uhci_hcd: USB Universal Host Controller Interface driver
[    1.525617] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.525626] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.525636] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.525662] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
[    1.525737] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.525741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.525745] usb usb2: Product: UHCI Host Controller
[    1.525748] usb usb2: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.525752] usb usb2: SerialNumber: 0000:00:1d.0
[    1.527478] hub 2-0:1.0: USB hub found
[    1.527490] hub 2-0:1.0: 2 ports detected
[    1.527883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.527892] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.527902] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.527935] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002020
[    1.528039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.528043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.528047] usb usb3: Product: UHCI Host Controller
[    1.528050] usb usb3: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.528054] usb usb3: SerialNumber: 0000:00:1d.1
[    1.528270] hub 3-0:1.0: USB hub found
[    1.528281] hub 3-0:1.0: 2 ports detected
[    1.528652] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.528662] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.528671] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.528729] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    1.528814] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.528818] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.528821] usb usb4: Product: UHCI Host Controller
[    1.528825] usb usb4: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.528828] usb usb4: SerialNumber: 0000:00:1d.2
[    1.529037] hub 4-0:1.0: USB hub found
[    1.529049] hub 4-0:1.0: 2 ports detected
[    1.529423] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.529432] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.529443] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.529475] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00002060
[    1.529548] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.529552] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.529556] usb usb5: Product: UHCI Host Controller
[    1.529559] usb usb5: Manufacturer: Linux 4.2.0-19-generic uhci_hcd
[    1.529562] usb usb5: SerialNumber: 0000:00:1d.3
[    1.529789] hub 5-0:1.0: USB hub found
[    1.529800] hub 5-0:1.0: 2 ports detected
[    1.530091] i8042: PNP: PS/2 Controller [PNP0303:C1BA,PNP0f13:C1BB] at 0x60,0x64 irq 1,12
[    1.531753] i8042: Detected active multiplexing controller, rev 1.1
[    1.532468] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.532476] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.532551] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.532664] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.532764] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.533052] mousedev: PS/2 mouse device common for all mice
[    1.533348] rtc_cmos 00:01: RTC can wake from S4
[    1.533566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.533602] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.533621] i2c /dev entries driver
[    1.533767] device-mapper: uevent: version 1.0.3
[    1.533915] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.533962] platform eisa.0: Probing EISA bus 0
[    1.533971] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.533975] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.533980] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.533998] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.534006] platform eisa.0: EISA: Detected 0 cards
[    1.534034] cpufreq-nforce2: No nForce2 chipset.
[    1.534048] ledtrig-cpu: registered to indicate activity on CPUs
[    1.534068] PCCT header not found.
[    1.534535] NET: Registered protocol family 10
[    1.535011] NET: Registered protocol family 17
[    1.535036] Key type dns_resolver registered
[    1.535338] Using IPI No-Shortcut mode
[    1.535586] Loading compiled-in X.509 certificates
[    1.542091] Loaded X.509 cert 'Build time autogenerated kernel key: da99c1365ea7a9eee106ce16700ccbcac73f098e'
[    1.542121] registered taskstats version 1
[    1.542153] zswap: loading zswap
[    1.542157] zswap: using zbud pool
[    1.542165] zswap: using lzo compressor
[    1.546363] Key type trusted registered
[    1.547303] ACPI: Battery Slot [C16D] (battery present)
[    1.547460] ACPI: Battery Slot [C16C] (battery absent)
[    1.597291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.597514] Key type encrypted registered
[    1.597526] AppArmor: AppArmor sha1 policy hashing enabled
[    1.597532] ima: No TPM chip found, activating TPM-bypass!
[    1.597573] evm: HMAC attrs: 0x1
[    1.597933]   Magic number: 11:667:416
[    1.598119] rtc_cmos 00:01: setting system clock to 2015-12-23 05:25:50 UTC (1450848350)
[    1.601317] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.601320] EDD information not available.
[    1.601452] PM: Hibernation image not present or could not be loaded.
[    1.777531] isapnp: No Plug & Play device found
[    1.777545] ata1.00: ATA-6: TOSHIBA MK4026GAX, PA103G, max UDMA/100
[    1.777549] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.777558] ata1.01: ATAPI: DV-28E-C, A.4L, max MWDMA2
[    1.784396] ata1.00: configured for UDMA/100
[    1.800322] ata1.01: configured for MWDMA2
[    1.801611] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4026GA 3G   PQ: 0 ANSI: 5
[    1.801962] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.807305] scsi 0:0:1:0: CD-ROM            TEAC     DV-28E-C         A.4L PQ: 0 ANSI: 5
[    1.807393] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.829321] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[    1.829325] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.829494] sd 0:0:0:0: [sda] Write Protect is off
[    1.829499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.829538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.829894] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.830146] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.907447]  sda: sda1 sda2 < sda5 >
[    1.907941] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.908467] Freeing unused kernel memory: 928K (c1b16000 - c1bfe000)
[    1.908558] Write protecting the kernel text: 7580k
[    1.908600] Write protecting the kernel read-only data: 3024k
[    1.908602] NX-protecting the kernel data: 4708k
[    1.927686] random: udevadm urandom read with 12 bits of entropy available
[    2.016060] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    2.056943] wmi: Mapper loaded
[    2.061207] ACPI: Video Device [C054] (multi-head: yes  rom: no  post: no)
[    2.061551] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.212397] usb 2-1: New USB device found, idVendor=045e, idProduct=009d
[    2.212405] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.212409] usb 2-1: Product: Microsoft Wireless Optical Desktop® 2.10
[    2.212412] usb 2-1: Manufacturer: Microsft
[    2.286886] [drm] Initialized drm 1.1.0 20060810
[    2.294633] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[    2.294643] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    2.294650] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    2.294657] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    2.332478] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[    2.332536] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    2.344034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17015522a29, max_idle_ns: 440795246269 ns
[    2.352675] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:12:79:c6:8e:5e
[    2.417357] firewire_ohci 0000:02:06.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.465117] hidraw: raw HID events driver (C) Jiri Kosina
[    2.510228] [drm] Memory usable by graphics device = 256M
[    2.510237] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    2.510240] fb: switching to inteldrmfb from VESA VGA
[    2.510298] Console: switching to colour dummy device 80x25
[    2.510922] [drm] Replacing VGA console driver
[    2.513995] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.514001] [drm] Driver supports precise vblank timestamp query.
[    2.514124] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.589454] usbcore: registered new interface driver usbhid
[    2.589460] usbhid: USB HID core driver
[    2.606262] input: Microsft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:045E:009D.0001/input/input13
[    2.660478] microsoft 0003:045E:009D.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1/input0
[    2.678364] input: Microsft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:045E:009D.0002/input/input14
[    2.732682] microsoft 0003:045E:009D.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.0-1/input1
[    2.920518] firewire_core 0000:02:06.2: created device fw0: GUID 718b500029c115a6, S400
[    2.937506] [drm] initialized overlay support
[    2.937685] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[    3.040097] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0/0x0, board id: 0, fw id: 35334
[    3.040111] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    3.080500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[    3.156619] fbcon: inteldrmfb (fb0) is primary device
[    3.157007] Console: switching to colour frame buffer device 128x48
[    3.157059] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.157062] i915 0000:00:02.0: registered panic notifier
[    3.644792] random: nonblocking pool is initialized
[    3.693637] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.904501] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    5.085575] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    5.085767] systemd[1]: Detected architecture x86.
[    5.100954] systemd[1]: Set hostname to <kevin-HP-Compaq-nx6110-PY401ES-AB8>.
[    5.725993] systemd[1]: NetworkManager.service: Cannot add dependency job, ignoring: Unit NetworkManager.service failed to load: No such file or directory.
[    5.727312] systemd[1]: Reached target Encrypted Volumes.
[    5.727656] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.727733] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.727774] systemd[1]: Reached target Remote File Systems (Pre).
[    5.727801] systemd[1]: Reached target User and Group Name Lookups.
[    5.727868] systemd[1]: Created slice Root Slice.
[    5.727939] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.728116] systemd[1]: Created slice User and Session Slice.
[    5.728181] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.728233] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.728369] systemd[1]: Listening on Journal Audit Socket.
[    5.728418] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.728463] systemd[1]: Listening on udev Kernel Socket.
[    5.728526] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.728664] systemd[1]: Created slice System Slice.
[    5.728829] systemd[1]: Created slice system-getty.slice.
[    5.728973] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.729007] systemd[1]: Reached target Slices.
[    5.729978] systemd[1]: Starting Increase datagram queue length...
[    5.730075] systemd[1]: Listening on udev Control Socket.
[    5.730163] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.730256] systemd[1]: Listening on Journal Socket.
[    5.731222] systemd[1]: Started Read required files in advance.
[    5.734691] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.735634] systemd[1]: Starting udev Coldplug all Devices...
[    5.941557] systemd[1]: Started Braille Device Support.
[    5.942585] systemd[1]: Mounting POSIX Message Queue File System...
[    5.943554] systemd[1]: Starting Uncomplicated firewall...
[    6.171143] systemd[1]: Starting Load Kernel Modules...
[    6.172204] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.173137] systemd[1]: Starting Setup Virtual Console...
[    6.174103] systemd[1]: Mounting Debug File System...
[    6.175125] systemd[1]: Mounting Huge Pages File System...
[    6.377152] systemd[1]: Started Setup Virtual Console.
[    6.540750] systemd[1]: Started Uncomplicated firewall.
[    6.573370] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.574593] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.759572] systemd[1]: Started udev Coldplug all Devices.
[    6.809746] systemd[1]: Mounted Huge Pages File System.
[    6.809816] systemd[1]: Mounted Debug File System.
[    6.809854] systemd[1]: Mounted POSIX Message Queue File System.
[    6.810222] systemd[1]: Started Increase datagram queue length.
[    6.810808] systemd[1]: Listening on Syslog Socket.
[    6.811813] systemd[1]: Starting Journal Service...
[    7.400470] lp: driver loaded but no devices found
[    7.503397] ppdev: user-space parallel port driver
[    8.291010] systemd[1]: Started Journal Service.
[    8.541990] lib80211: common routines for IEEE802.11 drivers
[    8.541997] lib80211_crypt: registered algorithm 'NULL'
[    8.622698] libipw: 802.11 data/management/control stack, git-1.1.13
[    8.622702] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[    8.679048] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[    8.679053] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[    8.679339] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[    9.046910] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[   10.895043] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   11.473781] systemd-journald[233]: Received request to flush runtime journal from PID 1
[   12.408718] NET: Registered protocol family 23
[   12.537080] intel_rng: FWH not detected
[   12.694633] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:099c]
[   12.694659] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   12.694666] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[   12.694670] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   12.694677] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[   12.800936] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000103B (\_SB_.C002.C003.C085) (20150619/utaddress-254)
[   12.800950] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.800956] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C096) (20150619/utaddress-254)
[   12.800963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.800966] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C096) (20150619/utaddress-254)
[   12.800973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.800975] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.924827] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[   12.924837] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   12.924843] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   12.924855] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[   12.924860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[   12.926152]  excluding 0x3000-0x30ff 0x3400-0x34ff
[   12.931789] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd03fffff]
[   12.931795] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd03fffff:
[   12.931800]  excluding 0xd0000000-0xd003ffff
[   14.046807] ipw2200 0000:02:04.0 wlp2s4: renamed from eth1
[   14.473066] input: HP WMI hotkeys as /devices/virtual/input/input16
[   14.519481] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   14.520796]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   14.521532] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   14.521916]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   14.522272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   14.522845]  clean
[   14.522868] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   14.523498]  clean
[   14.523524] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   14.523530]  excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[   14.523566] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   14.523584]  clean
[   14.523606] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   14.523624]  clean
[   14.523646] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   14.525832]  clean
[   15.396048] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55389 usecs (2669 samples)
[   15.396056] snd_intel8x0 0000:00:1e.2: clocking to 48000
[   16.247133] cfg80211: World regulatory domain updated:
[   16.247143] cfg80211:  DFS Master region: unset
[   16.247146] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   16.247150] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.247154] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.247157] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   16.247161] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   16.247165] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   16.247169] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   16.247172] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   16.247175] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   18.036409] Adding 1298428k swap on /dev/mapper/ubuntu--mate--vg-swap_1.  Priority:-1 extents:1 across:1298428k FS
[   20.821975] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   21.083290] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   24.560380] audit: type=1400 audit(1450848373.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=504 comm="apparmor_parser"
[   24.560398] audit: type=1400 audit(1450848373.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=504 comm="apparmor_parser"
[   24.687246] audit: type=1400 audit(1450848373.584:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=504 comm="apparmor_parser"
[   24.687261] audit: type=1400 audit(1450848373.584:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=504 comm="apparmor_parser"
[   24.687271] audit: type=1400 audit(1450848373.584:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=504 comm="apparmor_parser"
[   24.687281] audit: type=1400 audit(1450848373.584:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=504 comm="apparmor_parser"
[   24.835209] audit: type=1400 audit(1450848373.732:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=504 comm="apparmor_parser"
[   25.100938] audit: type=1400 audit(1450848374.000:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=504 comm="apparmor_parser"
[   25.100954] audit: type=1400 audit(1450848374.000:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=504 comm="apparmor_parser"
[   25.100964] audit: type=1400 audit(1450848374.000:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=504 comm="apparmor_parser"
[   42.211346] Non-volatile memory driver v1.3
[   46.076650] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.534086] b44 ssb0:0 eth0: powering down PHY
[   49.552960] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   52.816216] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   52.816225] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   52.816332] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   60.343078] ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
[   91.169389] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[   91.305172] b44 ssb0:0 eth0: powering down PHY
[   91.316579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   91.365494] b44 ssb0:0 eth0: powering down PHY
[   91.455669] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   93.387648] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[   93.401703] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[   93.541100] b44 ssb0:0 eth0: powering down PHY
[   93.551389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   96.816252] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[   96.816265] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   96.816388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  128.816130] b44 ssb0:0 eth0: Link is down
[  130.170723] b44 ssb0:0 eth0: powering down PHY
[  130.183713] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  130.645920] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  130.826443] b44 ssb0:0 eth0: powering down PHY
[  130.835858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  131.015060] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  132.024601] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  132.170119] b44 ssb0:0 eth0: powering down PHY
[  132.179364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  133.651881] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s4: link becomes ready
[  140.816214] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  140.816225] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  140.817439] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  141.089297] ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
[  141.816125] b44 ssb0:0 eth0: Link is down
[  144.816233] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  144.816241] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  172.177508] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  172.324567] b44 ssb0:0 eth0: powering down PHY
[  172.336086] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  172.384842] b44 ssb0:0 eth0: powering down PHY
[  172.469436] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  173.989325] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  174.003001] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  174.146042] b44 ssb0:0 eth0: powering down PHY
[  174.155228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  177.816250] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  177.816264] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  177.816610] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  472.000155] b44 ssb0:0 eth0: Link is down
[  475.258153] b44 ssb0:0 eth0: powering down PHY
[  475.283894] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  475.890804] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  476.120022] b44 ssb0:0 eth0: powering down PHY
[  476.139492] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  476.340092] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  477.413195] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  477.628564] b44 ssb0:0 eth0: powering down PHY
[  477.640034] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  479.012142] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s4: link becomes ready
[  481.000227] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  481.000237] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  481.000359] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  486.600008] ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
[  518.270926] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  518.517265] b44 ssb0:0 eth0: powering down PHY
[  518.539100] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  518.628015] b44 ssb0:0 eth0: powering down PHY
[  518.754814] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  520.274152] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  520.300782] IPv6: ADDRCONF(NETDEV_UP): wlp2s4: link is not ready
[  520.532251] b44 ssb0:0 eth0: powering down PHY
[  520.549539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  524.000226] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[  524.000234] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[  524.000338] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Kod Seç

gedit /var/log/wicd

Kod Seç

kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$ gedit /var/log/wicd
'gedit' programı şu anda kurulu değil. Kurulumunu şunu yazarak yapabilirsiniz:
sudo apt-get install gedit
kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$

mhmtkrktr · 23 Aralık 2015 - 08:41:05

gedit = metin editörü.
Farklı dağıtım ve ortamlarda farklı editörler kurulmuş olabilir. Bu komutu kendinize göre uyarlayarak verebilirsiniz. Örn: leafpad /var/log/wicd
Alternatif olarak, ucbirim editörü nano kullanabilirsin. (son kullanıcı olarak bakarsak, biraz daha ilkel görünebilir ancak tüm sistemlerde dahili olarak bulunur.)

Kod Seç

nano /var/log/wicd
çıkış için F2
herhangi bir düzenlemeyi kaydedeceksen F3 tuşlarını kullanabilirsin.

zenmate · 23 Aralık 2015 - 11:27:31

Kod Seç

nano /var/log/wicd

bu kodu verdiğimde

Kod Seç

Parçalama arızası (çekirdek döküldü)
kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$

bunu verdi

heartsmagic · 24 Aralık 2015 - 15:22:12

Kod Seç

ls -l /var/log/wicd
ne diyor?

nano'un da çöktüğünü ilk defa gördüm. Mate üzerindeki metin düzenleyici sanırım Pluma, ona göre açtırırız dosyayı. Fakat peşin olarak söyleyeyim pek ümidim yok bu konuda. Bu kart bazı sorunlar yaşatıyor kullanıcılara, benim yaptığım gibi firmware dosyaları ile deneniyor bir şeyler ancak sendeki gibi parola sorunu yaşandığını hiç görmedim.

zenmate · 24 Aralık 2015 - 23:37:11

Kod Seç

ls -l /var/log/wicd

Kod Seç

kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$ ls -l /var/log/wicd
toplam 1768
-rw-r----- 1 root adm 371392 Ara 24 23:35 wicd.log
-rw-r----- 1 root adm 646103 Ara 24 00:26 wicd.log.1
-rw-r----- 1 root adm 367984 Ara 23 07:26 wicd.log.2
-rw-r----- 1 root adm 409205 Ara 23 00:02 wicd.log.3
kevin@kevin-HP-Compaq-nx6110-PY401ES-AB8:~$

mhmtkrktr · 25 Aralık 2015 - 01:21:24

Öncelikle belirteyim, Ubuntu üzerinde donanım konusun da yardımcı olabileceğim çok bir şey yok. Fakat nano 'nun çökmesi ilginç olmuş. Kullandığın sürümle ilgili bir sorun olabilir mi bilmiyorum. Sistem güncellemelerini almışmıydın? Birde nano ile farklı dosyaları açmak istediğinde nasıl bir sonuç çıkıyor. Örn: nano /usr/bin/firefox gibi, adını ve yolunu bildiğin başka bir metin içerikli dosya da olabilir.
Wifi için tekrar telefona bağlamayı deneyebilir misin? Eğer sorunsuz bağlantı kurabilirsen, kullanmakta olduğun dağıtıcının, yazılımını güncelleyerek dene derim. Diğer ağlarda yaşayacağın sorunu gidermez belki ama kendi ağının sorununu çözebilir.

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 25 Aralık 2015 - 01:30:35

Yukarda paylaştığın görseli şimdi farkettim. Orada gördüğün Channel = auto seçeneğini otomatikten çıkartıp 4 ile 7 arasında bir değere sabitleyerek deneyebilir misin? SSID (görünen isim) bölümünü de sembol kullanmadan, tamamen küçük harflerden oluşan bir isimle değiştirerek denemeni öneririm.

zenmate · 25 Aralık 2015 - 20:12:41

arkadaşlar olayı çözdüm şuan wifiden bağlanabiliyorum

router ı değişince bağlandım

asus rtn-11 kaldırdım airtes taktım düzeldi

Nano konusunda da valla pc çok güzel çalışıyor sorun yok

yardımda bulunan tüm arkadaşlara teşekkür ederim

İşiniz gücünüz rast gelsin

heartsmagic · 25 Aralık 2015 - 20:28:22

Eski modemdeki sorunu merak etsem de sorunun bir şekilde çözülmesine sevindim.

Ubuntu Türkiye

Haberler:

ubuntu PRO/Wireless 2200BG [Calexico2] Network parola hata

zenmate

heartsmagic

zenmate

heartsmagic

zenmate

heartsmagic

zenmate

mhmtkrktr

zenmate

heartsmagic

zenmate

mhmtkrktr

zenmate

heartsmagic