Alıntı yapılan: 1DOST - 06 Mayıs 2009 - 17:05:01
Merhaba arkadaşlar, önceki sürümlerde kullanabildiğim halde 9.04'te masaüstü efeklerini niçin etkinleştiremiyorum acaba? Bu iş saçma geliyor. Çalışmayan şeyler çalışacağına çalışanlar çalışmıyor!!
Dell inspiron 1525 laptop intel ekran kartı var
Bende de Quad Core Q8200 işlemci, 3 GB RAM ve Ati Radeon HD3450 Ekran kartı var ama ben de etkinleştiremiyorum. sadece Compiz Fusion Icon'u çalıştırdığımda masaüstü efektleri çalışmaya başlıyor.
@anonymtrk, çalışmayan nedir tam olarak? Gerçi başlığı ayırmamız gerekebilir zira senin kartın ATI.
compizi elle mi yüklediniz yoksa masaüstü efectlerinden mi aktif hale getirdiniz?
Alıntı yapılan: heartsmagic - 11 Mayıs 2009 - 02:54:27
@anonymtrk, çalışmayan nedir tam olarak? Gerçi başlığı ayırmamız gerekebilir zira senin kartın ATI.
Masaüstüne sağ tık => Masaüstü Arkaplanını Değiştir => Masaüstü Efektleri => Masaüstü efektlerini etkinleştir dediğimde (Normal veya Extra efektler) "Efektler Etkinleştirilemedi diyor.
"compizi elle mi yüklediniz yoksa masaüstü efectlerinden mi aktif hale getirdiniz?"
Mecbur elle yükledim. Tray icon ile birlikte kullanıyorum, fakat otomatik başlangıca eklediğimde compizi, "Reload Window Manager" demeden efektler etkinleştirilmiyor. Yani bilgisayarım açıldığında efektsiz olarak açılıyor ve ben kendim aktif ediyorum efektleri. Sanırım arkadaşta da aynı sorun var. (Not: orjinal 9.04 CD'sinden yükledim, başka tema veya görsellikle alakalı * bir şey yüklemedim, yüklemeye çalışmadım)
@anonymtrk, Ubuntu 9.04 sürümünün ATI ekran kartlarıyla uyumsuz çalışmadığı son 10 konudan sonra anlaşıldı. Güncellemeleri ve Bug rapoarlarını takip etmekten başka yapacak iki şeyimiz var.
1. Kırmızı bu konuya el atarsa ATI konusunda kendisine güvenim sonsuz :)
2. Envy'yi kurup, ekran kartını envy ile kurman.
Son olarak bir joker seçenek aşağıdaki başlık;
http://forum.ubuntu-tr.net/index.php/topic,8716.0.html (http://forum.ubuntu-tr.net/index.php/topic,8716.0.html)
Konu ekran kartımın kaldırmaması değil. Otomatik olarak çalışmıyor ve sebebini bilmediğim bir şekilde efektleri normal yerinden açamıyorum. Her seferinde el ile müdahale etmem gerekiyor. Ekran kartım destekleniyor fakat 8.04'te etkinleştirebildiğim efektleri sanki sistemimde bi eksiklik varmış gibi "Etkinleştirilemedi" cevabıyla etkin hale getiremiyorum. Compiz fusion ve tray icon olmasa kullanamayacağım sanırım. :)
glxinfo | grep render
ne diyor?
Geç cevap için özür dilerim,
orcun@orcun-desktop:~$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: ATI Radeon HD 3450
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_copy_depth_to_color,
orcun@orcun-desktop:~$
Kartiniz Compizle sorun cikartabilir. Dün aksam esrama`nin kartini kurmustum. Oda ayni seyden bahsetti. Sanirim Compiz ile ATI sürücüsü arasinda anlasmazlik var. Aslinda ayrintili bilgiler sunarsaniz bakabilirim. Kendim Compiz kullanmiyorum. Compiz bende aktif oluyor. Bir kere aktif ettikten sonra devamli calisiyor.
Alıntı yapılan: Kirmizi - 13 Mayıs 2009 - 12:55:36
Kartiniz Compizle sorun cikartabilir. Dün aksam esrama`nin kartini kurmustum. Oda ayni seyden bahsetti. Sanirim Compiz ile ATI sürücüsü arasinda anlasmazlik var. Aslinda ayrintili bilgiler sunarsaniz bakabilirim. Kendim Compiz kullanmiyorum. Compiz bende aktif oluyor. Bir kere aktif ettikten sonra devamli calisiyor.
İstediğin her türlü bilgiyi sunabilirim.
Makineyi yeni formatladıktan sonra Donanım Sürücüleri'nden ATI restricted Drivers'i etkinleştirdim. Sonra masaüstü efektlerini etkinleştir dedim. (Hardy Heron'da ekstra efektler de kullanılabiliyordu) fakat etkinleştirilemedi dedi. Sonra "normal" i seçtim fakat o da etkinleştirilemedi deyince ben de şu adrestekileri uygulayarak Compiz'i yükledim
https://help.ubuntu.com/community/CompositeManager/CompizFusion
sonra da compiz fusion icon'u yükledim. Fusion icon'u çalıştırınca efektler normal olarak çalışmaya başlıyor. Fakat her seferinde manuel olarak fusion icon'u elle çalıştırmak sıkıcı bir hal alıyor.
Alıntı yapılan: anonymtrk - 13 Mayıs 2009 - 21:44:52
Alıntı yapılan: Kirmizi - 13 Mayıs 2009 - 12:55:36
Kartiniz Compizle sorun cikartabilir. Dün aksam esrama`nin kartini kurmustum. Oda ayni seyden bahsetti. Sanirim Compiz ile ATI sürücüsü arasinda anlasmazlik var. Aslinda ayrintili bilgiler sunarsaniz bakabilirim. Kendim Compiz kullanmiyorum. Compiz bende aktif oluyor. Bir kere aktif ettikten sonra devamli calisiyor.
İstediğin her türlü bilgiyi sunabilirim.
Makineyi yeni formatladıktan sonra Donanım Sürücüleri'nden ATI restricted Drivers'i etkinleştirdim. Sonra masaüstü efektlerini etkinleştir dedim. (Hardy Heron'da ekstra efektler de kullanılabiliyordu) fakat etkinleştirilemedi dedi. Sonra "normal" i seçtim fakat o da etkinleştirilemedi deyince ben de şu adrestekileri uygulayarak Compiz'i yükledim
https://help.ubuntu.com/community/CompositeManager/CompizFusion
sonra da compiz fusion icon'u yükledim. Fusion icon'u çalıştırınca efektler normal olarak çalışmaya başlıyor. Fakat her seferinde manuel olarak fusion icon'u elle çalıştırmak sıkıcı bir hal alıyor.
Sizin kartiniz ATI mi INTEL mi ? Buna bir aciklik getirelim. Ubuntu 9.04 kullaniyorsaniz ATI 9600 büyük ihtimal fglrx driver ile sorun yasamaniz gerekiyordu. Eger böyle bir sorun yasamiyorsaniz o kartla cok sansli bir kullanici oldugunuzu göz önünde bulundurun derim. Diger bilgilere gelince. sürücüler dogru yüklenmismi onlarin ciktilarini buraya postalayin. xorg.conf dosyasina bakalim. Bazi yerlerde compiz disabled olarak geciyor.
Alıntı yapılan: Kirmizi - 13 Mayıs 2009 - 22:27:09
Alıntı yapılan: anonymtrk - 13 Mayıs 2009 - 21:44:52
Alıntı yapılan: Kirmizi - 13 Mayıs 2009 - 12:55:36
Kartiniz Compizle sorun cikartabilir. Dün aksam esrama`nin kartini kurmustum. Oda ayni seyden bahsetti. Sanirim Compiz ile ATI sürücüsü arasinda anlasmazlik var. Aslinda ayrintili bilgiler sunarsaniz bakabilirim. Kendim Compiz kullanmiyorum. Compiz bende aktif oluyor. Bir kere aktif ettikten sonra devamli calisiyor.
İstediğin her türlü bilgiyi sunabilirim.
Makineyi yeni formatladıktan sonra Donanım Sürücüleri'nden ATI restricted Drivers'i etkinleştirdim. Sonra masaüstü efektlerini etkinleştir dedim. (Hardy Heron'da ekstra efektler de kullanılabiliyordu) fakat etkinleştirilemedi dedi. Sonra "normal" i seçtim fakat o da etkinleştirilemedi deyince ben de şu adrestekileri uygulayarak Compiz'i yükledim
https://help.ubuntu.com/community/CompositeManager/CompizFusion
sonra da compiz fusion icon'u yükledim. Fusion icon'u çalıştırınca efektler normal olarak çalışmaya başlıyor. Fakat her seferinde manuel olarak fusion icon'u elle çalıştırmak sıkıcı bir hal alıyor.
Sizin kartiniz ATI mi INTEL mi ? Buna bir aciklik getirelim. Ubuntu 9.04 kullaniyorsaniz ATI 9600 büyük ihtimal fglrx driver ile sorun yasamaniz gerekiyordu. Eger böyle bir sorun yasamiyorsaniz o kartla cok sansli bir kullanici oldugunuzu göz önünde bulundurun derim. Diger bilgilere gelince. sürücüler dogru yüklenmismi onlarin ciktilarini buraya postalayin. xorg.conf dosyasina bakalim. Bazi yerlerde compiz disabled olarak geciyor.
Ati Radeon HD3450 kart kullanıyorum. Ve restricted drivers sorunsuz şekilde çalışıyor (En azından compiz efektlerini tam olarak rahatlıkla görebiliyorum mesela ekrana alev yazma)
xorg.conf dosyasına gelince umarım doğru olanı bulmuşumdur:
rcun@orcun-desktop:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection
Bu arada aklıma geldi, satranç'ı 3B olarak çalıştırmaya çalıştım, şu ekran geldi:
(https://forum.ubuntu-tr.net/proxy.php?request=http%3A%2F%2Fimg90.imageshack.us%2Fimg90%2F9853%2Fekrangrntsadszpencerem.png&hash=888f8a38f4516f25d54e2260e25801ba252563a5)
xorg.conf dosyasini eksikmi yapistirdiniz, Yoksa cikti o kadarmi ?
Bu kadar.
orcun@orcun-desktop:~$ locate xorg.conf
/etc/X11/xorg.conf
/usr/share/man/man5/xorg.conf.5.gz
/var/lib/x11/xorg.conf.md5sum
/var/lib/x11/xorg.conf.roster
ve sonra da
Orcun@orcun-desktop:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection
Bu kadar değil mi? Yanlış bişey mi yaptım? :)
senin dosyan anormal. Olmasi gerekenler yok.
Benim xorg.conf dosyasi bu sekilde.
cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
E ne yapacağım ben şimdi? :D
Konuyu ilgili kisiler bölsün. Sende
sudo aticonfig --initial
komutunu uygula. Sistemi yeniden baslat.
Alıntı yapılan: Kirmizi - 14 Mayıs 2009 - 00:55:47
Konuyu ilgili kisiler bölsün. Sende
sudo aticonfig --initial
komutunu uygula. Sistemi yeniden baslat.
orcun@orcun-desktop:~$ sudo aticonfig --initial
[sudo] password for orcun:
Found fglrx primary device section
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-0
Yaptım, yeniden başlattım bekliyorum.
konu tasinmasi gerekiyor. Diger bilgileri de biraz arastirirsan ögrenirsin.
Attım bile reset :D Resetten sonra editledim mesajı :P
http://forum.ubuntu-tr.net/index.php/topic,8716.0.html
@anonymtrk,
Satranç oyununu 3B oynayamaman normal çünkü bazı paketlerin kurulu olması gerekiyor.
sudo apt-get install python-gtkglext1 python-opengl
Konuyu ilgili bölüme taşıyorum.
Konuyu bölüyorum :)
1 Kod ile halloldu.
sudo apt-get install xorg-driver-fglrx
Bundan sonra da xorg.conf dosyasına işlenmiş mi kontrol ettim:
cat /etc/X11/xorg.conf
Benim çıktı bu şekilde:
orcun@orcun-desktop:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Şu an problemler bitmiş durumda. Sadece compiz ve 3D problemlerinin (oyunlar için) çözülmesine dua etmeye devam...
Şimdi de görüntü özelliklerine girince, ekranda siyah bantlar yanıp sönmeye başlıyor. Ve bilgisayar çok fazla kasılıyor. :(
ATI nın Ubuntu ile büyük sorunu var anlaşılan. Atı driverleri sorunsuz kurulsa dahi compiz bende çalışmıyor (çalışsa bile muhakka biryerlerde sorun çıkartıyor). Sizde de büyük hitimalle böyle. Şimdilik Ubuntu 9.1 versiyonuna kadar compizi kapalı tutacağım. Bence sizde öyle yapın. Benim ekran kartı da atı hd 38x serisinden.