notebook imlecsurer cok hasas galiba bazen uzerinde gezdigim yerleri tiklamadan aciyor bu hassaslik ayarini nasil yapabilirim birde on paneldeki kisa yollar var ses azaltma cogaltma hepsi calisiyor fakat ses kesme ozeligi sonradan calismamaya basladi klavye kisa yollarindan aktif etmeme rahmen olmuyor bunu giderebilirmiyim ilk kurdugumda calisiyordu son sorunda sd kart okuyucum kartlari gormuyor kusura bakmayin bu notebook uzun zamandir kullanmiyordum ubuntuya iyice alistim artik butun isletim sistemlerini degistirdim evde ki bilgisayrlardabu sorunlarla karsilastim dell inspiron 6000 modelinde okadrda con sikici olmasada imlecsurer sorununu duzeltsemde yeter beni bu sekildede ubuntu mutlu ediyor sitenizde soruna cok uzuldum tekrar bize kazandiran arkadaslara cok tesekkurler
Imlec sürer nedir bilmiyorum ??? Eger sorunuzu dogru anladiysam Linkte isinize yarayacak bilgiler mevcut.
http://ubuntuforums.org/archive/index.php/t-604160.html
SORUN TOUCHPAD BIR LINK UZERINE GELINCE 2 SANIYE KALIR KALMAZ O LINKI ACIYOR COK HASSAS VERDIGINIZ LINKTEKI xorg.conf DUZENLEMESINI YAPMAK ICIN NE YAPMAM GEREKLI TESEKURLER
http://wiki.linux-sevenler.org/index.php/NASIL_Gentoo_synaptics_touchpad
Zamanında burada Gentoo için anlatmıştım. Sen burayı takip edebilirsin ancak kurulum aşamalarını geç. Xorg Ayarları senin istediğin bölüm. Fakat yaparken kendine göre uyarlamayı unutma. Ubuntu'da şu an xorg.conf boş gibi geliyor neredeyse, bu belgede "vardır" dediğim yerler olmayabilir. Eğer yoksa kendin ekleyebilirsin. Ancak önce yedek al:
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.yedek
Ardından dosyayı açıp kendine göre düzenle:
sudo gedit /etc/X11/xorg.conf
Oturumu kapatıp tekrar girmen gerekiyor. Eğer işe yaramaz ve masaüstü açılmazsa Ctrl+ALt+F1 ile konsola geçip, giriş yapıp şu komutla yedekten geri dönebilirsin:
sudo /etc/X11/xorg.conf.yedek /etc/X11/xorg.conf
imlec surer olayini cozdum verilen link ve bilgiler dogrultusunda ses olayinida cozdum tek sorun sd kart calismiyor buda dell loptoplarda olagan birsey galiba ama cozumleri var internette ama ben pek anlamadim cunku ubuntu daha onceki surumlerinda yasanmis 9.04 nasil cozulur bilmiyorum sd kart sorunumu nasil cozecegim anlamadim her sey icin tesekkurler
lspci
ve lsusb
ciktilarini verirseniz. Bilgilerimiz dahilinde yardimci olabiliriz. Bunun disinda Sudo 10 ve Sudo 11. Dergisini okumanizi öneririm.
lspci ve lsusb ciktilari
tubuntu@tubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
tubuntu@tubuntu:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Ciktilarda SD-Kart icin bir bilgi yok. Sanirim Ubuntu donanim olarak tanimiyor. Internette bu konuda bir arastirma yaptinizmi?
internete arastirmam sonucu dell sd card sorun var fakat bir sitede soyle bir bilgi var patch lari nasil yuklerim bilemiyorum
kaynak :http://www.martinhenze.de/2006/02/04/sd-card-reader-and-ubuntu-linux/
SD-card reader and Ubuntu Linux
I finally managed to get the built-in SD-card reader in my DELL Inspiron 6000 working and this should work for most other built-in card readers, too.
Before I start with the how-to, big thanks to the developers of the Secure Digital Host Controller Interface driver and Mark Lindeman, who's instructions were very helpful.The Kernel patch provided by the SDHCI team somehow doesn't work with the Ubuntu default Kernel (or at least I didn't managed to get it working), so we have to use the vanilla Kernel. You should be root (type sudo -s) for most of the steps.
1. Download the latest stable Kernel form kernel.org (full source) and safe it to /usr/src
2. Download all three patches from the mailinglist (the current version is 0.10) to e.g. /usr/src/patch
3. We need at least the packages build_essential, kernel_package and libncurses5-dev, so apt-get install them
4. Now cd to /usr/src and untar the Kernel source
tar -xjvf linux-2.6.15.2.tar.bz2
and cd to the new directory linux-2.6.15.2
5. It's time to apply the three patches we downloaded from the mailinglist:
patch -p1 < ../patch/sdhci-0001.bin
patch -p1 < ../patch/pci-sdhc-0001.bin
patch -p1 < ../patch/mmc-respopcode-0001.bin
6. To make it easier, we copy the current Kernel config and hope, that everything works fine:
cp /boot/config-`uname -r` .config
7. Now we have to configure our new Kernel:
make menuconfig
Go to Device Drivers -> MMC/SD Card Support and enable (press y) atleast MMC support, MMC block device driver and Secure Digital Host Controller Interface support (EXPERIMENTAL). It might be a good idea to also configure the other new features, but probably it will work without.
8. Time to build our new Kernel (with vanilla taste):
make-kpkg –initrd –revision sdcard binary
This will take some time, so drink 42 coffees or something like that.
9. We now have some .deb files in /usr/src that we can use as usual:
dpkg -i kernel-image-2.6.15.2_sdcard_i386.deb
10. Now we are ready for a reboot (select the new Kernel in GRUB).
11. I simply inserted a SD-card in a slot and had a look at the output of dmesg and mounted the device listend there using -t vfat.
Please keep in mind that building a vanilla kernel is very complex and not a good idea if you don't now, what you're exactly doing. The vanilla kernel also might miss some features that are patched in the Ubuntu default kernel, so you could get problems with some hardware.
This entry was posted on Saturday, February 4th, 2006 at 14:33 and is filed under Ubuntu Linux. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
One Response to "SD-card reader and Ubuntu Linux"
1. » [Ubuntu Dapper ] SD Card reader for Acer aspire 5102 - ubuntu.sitebolt.net Says:
October 3rd, 2006 at 19:21
[...] When I put the card in the reader, I have nothing logged in the file /var/log/messages. I saw in this site http://www.martinhenze.de/2006/02/04/sd-card-reader-and-ubuntu-linux/ that patchs will be merged in the new kernel 2.6.18. I have the same behaviour. [...]
Anlatimda, Kernele patch nasil yapilir onu anlatiyor. Kernel bilginiz yoksa bence pek bulasmayin derim. Uygulama yaptigi kernelde zaten eski bir kernel. Suanda Ubuntu Kernel 2.6.28-15 kullaniyor. Söylenen patchler bence 2.6.28 sürümünde vardir. Patchleri zaten kernel.org tan almis. Mesajda 2006 yilindan kalma.
Simdik söyle yapalim. Bilgisayarinizda Windows isletim sistemi yüklü ise? Donanim Yöneticisinden SD-Card Reader icin donanim adina bakin. Texass Instrumant SD-Card gibi birseyler yazmasi gerekiyor. Bu adi ögrenirsek birseyler cikartabiliriz sanirim. Mesela söyle bir örnek var. Ricoh donanima sahip olanlar icin, http://ubuntuforums.org/showthread.php?t=760357
Hangi Ubuntu sürümünü kullaniyorsun?
sistemde xp yuklu degil sadece ubuntu 9.04 yuklu modeli Ricoh Co Ltd SD Card reader
http://ubuntuforums.org/attachment.php?attachmentid=66496&d=1208680680 Adresteki deb paketini kurun. Sistemi yeniden baslatin.
malesef ise yaramadi