açılışta ve kapanışta siyah ekranda hata raporları

[gokhanyildiz]

3-4 gündür ubuntu 8.04 sürümünü kullanıyorum.Bilgisayarımın tam performansını ubuntu sayesinde aldım diyebilirim.hertürlü windows sürümünün orjinal yazılımına sahibim fakat artık windows kullanmayı düşünmüyorum.Şuana kadar 2 tane sorunum oldu.1 i eski 1 i yeni.1. sorunum ses kartı ile ilgili konum. ses kartı kategorisinde asus f3sr ses sorunu başlığı altında belirttim ama hala sorunu çöebilmiş değilim.Hiçbir denemede başarılı olamadım.Şimdi yeni bir hata ile karşılaştım.Galiba güncellemelerden sonra oldu.Açılışta ve kapanışta bir çok hata raporu veriyor.Örneğin açılırken config ile ilgili hatalar veriyor daha sonra boot u tekrar okuyor ve pc açılıyor.Sorun nereden kaynaklanıyor anlamıyorum.Bu sorunu nasıl çözebiliriz.

[erginemr]

Bilgisayar açılırken hata verdiği anda ekranın fotoğrafını çekip buraya aktarır mısınız?

Masaüstü geldikten sonra da, konsolda;

Kod Seç Genişlet

dmesg > liste
gedit liste
yazarak "dmesg" komutunun çıktı listesini buraya aktarın.

[gokhanyildiz]

çıktı listesi:

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-23-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Jan 26 00:13:11 UTC 2009 (Ubuntu 2.6.24-23.48-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 262048) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262048
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262048
[    0.000000] On node 0 totalpages: 262048
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32417 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F8240 checksum 0
[    0.000000] ACPI: RSDP 000F8240, 0024 (r2 ACPIAM)
[    0.000000] ACPI: XSDT 3FFA0100, 007C (r1 _ASUS_ Notebook  4000801 MSFT       97)
[    0.000000] ACPI: FACP 3FFA0290, 00F4 (r3 A_M_I_ OEMFACP   4000801 MSFT       97)
[    0.000000] ACPI: DSDT 3FFA0680, AF82 (r1  F3Sr1 F3Sr1102      102 INTL 20051117)
[    0.000000] ACPI: FACS 3FFAE000, 0040
[    0.000000] ACPI: APIC 3FFA0390, 005C (r1 A_M_I_ OEMAPIC   4000801 MSFT       97)
[    0.000000] ACPI: MCFG 3FFA0430, 003C (r1 A_M_I_ OEMMCFG   4000801 MSFT       97)
[    0.000000] ACPI: SLIC 3FFA0470, 0176 (r1 _ASUS_ Notebook  4000801 MSFT       97)
[    0.000000] ACPI: DBGP 3FFA03F0, 0034 (r1 A_M_I_ OEMDBGP   4000801 MSFT       97)
[    0.000000] ACPI: BOOT 3FFA05F0, 0028 (r1 A_M_I_ OEMBOOT   4000801 MSFT       97)
[    0.000000] ACPI: ECDT 3FFA0620, 0054 (r1 A_M_I_ OEMECDT   4000801 MSFT       97)
[    0.000000] ACPI: OEMB 3FFAE040, 0060 (r1 A_M_I_ AMI_OEM   4000801 MSFT       97)
[    0.000000] ACPI: HPET 3FFAB610, 0038 (r1 A_M_I_ OEMHPET   4000801 MSFT       97)
[    0.000000] ACPI: ATKG 3FFAE2A0, 8024 (r1 A_M_I_  OEMATKG  5000702 MSFT       97)
[    0.000000] ACPI: SSDT 3FFB6DE0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260001
[    0.000000] Kernel command line: root=UUID=d2ae107a-8661-4bde-8db0-c0a9c4394199 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1995.062 MHz processor.
[   11.575806] Console: colour VGA+ 80x25
[   11.575809] console [tty0] enabled
[   11.576150] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   11.576452] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   11.595666] Memory: 1025252k/1048192k available (2179k kernel code, 22232k reserved, 1008k data, 368k init, 130688k highmem)
[   11.595672] virtual kernel memory layout:
[   11.595673]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   11.595674]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   11.595675]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   11.595676]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   11.595677]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
[   11.595678]       .data : 0xc0320c08 - 0xc041cdc4   (1008 kB)
[   11.595679]       .text : 0xc0100000 - 0xc0320c08   (2179 kB)
[   11.595681] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   11.595708] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   11.595827] hpet clockevent registered
[   11.675787] Calibrating delay using timer specific routine.. 3993.19 BogoMIPS (lpj=7986389)
[   11.675803] Security Framework initialized
[   11.675807] SELinux:  Disabled at boot.
[   11.675816] AppArmor: AppArmor initialized
[   11.675819] Failure registering capabilities with primary security module.
[   11.675825] Mount-cache hash table entries: 512
[   11.675913] Initializing cgroup subsys ns
[   11.675916] Initializing cgroup subsys cpuacct
[   11.675925] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
[   11.675931] monitor/mwait feature present.
[   11.675933] using mwait in idle threads.
[   11.675936] CPU: L1 I cache: 32K, L1 D cache: 32K
[   11.675938] CPU: L2 cache: 2048K
[   11.675940] CPU: Physical Processor ID: 0
[   11.675941] CPU: Processor Core ID: 0
[   11.675943] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000001
[   11.675950] Compat vDSO mapped to ffffe000.
[   11.675959] Checking 'hlt' instruction... OK.
[   11.692111] SMP alternatives: switching to UP code
[   11.693508] Early unpacking initramfs... done
[   12.023010] ACPI: Core revision 20070126
[   12.023062] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   12.082613] CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[   12.082628] SMP alternatives: switching to SMP code
[   12.083240] Booting processor 1/1 eip 3000
[   12.093408] Initializing CPU#1
[   12.171505] Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=7980032)
[   12.171511] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
[   12.171516] monitor/mwait feature present.
[   12.171518] CPU: L1 I cache: 32K, L1 D cache: 32K
[   12.171520] CPU: L2 cache: 2048K
[   12.171521] CPU: Physical Processor ID: 0
[   12.171523] CPU: Processor Core ID: 1
[   12.171524] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000001
[   12.172027] CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[   12.172046] Total of 2 processors activated (7983.21 BogoMIPS).
[   12.172193] ENABLING IO-APIC IRQs
[   12.172359] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   12.335416] APIC calibration not consistent with PM Timer: 115ms instead of 100ms
[   12.335418] APIC delta adjusted to PM-Timer: 1246872 (1446363)
[   12.335515] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   12.355516] Brought up 2 CPUs
[   12.355537] CPU0 attaching sched-domain:
[   12.355539]  domain 0: span 03
[   12.355541]   groups: 01 02
[   12.355544] CPU1 attaching sched-domain:
[   12.355545]  domain 0: span 03
[   12.355546]   groups: 02 01
[   12.355727] net_namespace: 64 bytes
[   12.355738] Booting paravirtualized kernel on bare hardware
[   12.356119] Time: 11:21:25  Date: 02/26/09
[   12.356142] NET: Registered protocol family 16
[   12.356297] EISA bus registered
[   12.356301] ACPI: bus type pci registered
[   12.356497] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
[   12.356498] PCI: Using configuration type 1
[   12.356521] Setting up standard PCI resources
[   12.360180] ACPI: EC: EC description table is found, configuring boot EC
[   12.380720] ACPI: Interpreter enabled
[   12.380723] ACPI: (supports S0 S1 S3 S4 S5)
[   12.380739] ACPI: Using IOAPIC for interrupt routing
[   12.382299] Error attaching device data
[   12.382333] Error attaching device data
[   12.389948] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[   12.389950] ACPI: EC: driver started in poll mode
[   12.390262] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   12.391017] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   12.391021] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[   12.392265] PCI: Transparent bridge - 0000:00:1e.0
[   12.392313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   12.392511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   12.392621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[   12.392728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   12.392836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   12.392948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[   12.393060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   12.393189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   12.393301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   12.413358] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[   12.413518] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
[   12.413675] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[   12.413831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
[   12.413987] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[   12.414141] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
[   12.414296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
[   12.414452] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
[   12.414609] ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] -  EB, should be 59 [20070126]
[   12.414615] Linux Plug and Play Support v0.97 (c) Adam Belay
[   12.414640] pnp: PnP ACPI init
[   12.414646] ACPI: bus type pnp registered
[   12.416961] pnp: PnP ACPI: found 13 devices
[   12.416964] ACPI: ACPI bus type pnp unregistered
[   12.416966] PnPBIOS: Disabled by ACPI PNP
[   12.417137] PCI: Using ACPI for IRQ routing
[   12.417139] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   12.455369] NET: Registered protocol family 8
[   12.455371] NET: Registered protocol family 20
[   12.455395] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   12.455399] hpet0: 3 64-bit timers, 14318180 Hz
[   12.456428] AppArmor: AppArmor Filesystem Enabled
[   12.459353] Time: tsc clocksource has been installed.
[   12.459360] Switched to high resolution mode on CPU 0
[   12.459453] Switched to high resolution mode on CPU 1
[   12.471336] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[   12.471345] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   12.471347] system 00:08: ioport range 0x800-0x87f has been reserved
[   12.471349] system 00:08: ioport range 0x400-0x41f has been reserved
[   12.471352] system 00:08: ioport range 0x500-0x53f has been reserved
[   12.471354] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   12.471356] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[   12.471359] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[   12.471361] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[   12.471364] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[   12.471369] system 00:0a: ioport range 0x250-0x253 has been reserved
[   12.471371] system 00:0a: ioport range 0x256-0x25f has been reserved
[   12.471374] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[   12.471376] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[   12.471381] system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved
[   12.471386] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   12.471388] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[   12.471391] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   12.471393] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
[   12.471395] system 00:0c: iomem range 0x0-0x0 could not be reserved
[   12.501721] PCI: Bridge: 0000:00:01.0
[   12.501724]   IO window: 8000-afff
[   12.501727]   MEM window: fde00000-fdefffff
[   12.501730]   PREFETCH window: dbd00000-fbcfffff
[   12.501733] PCI: Bridge: 0000:00:1c.0
[   12.501734]   IO window: disabled.
[   12.501738]   MEM window: fdf00000-fdffffff
[   12.501742]   PREFETCH window: disabled.
[   12.501746] PCI: Bridge: 0000:00:1c.1
[   12.501747]   IO window: disabled.
[   12.501751]   MEM window: fe000000-fe0fffff
[   12.501754]   PREFETCH window: disabled.
[   12.501758] PCI: Bridge: 0000:00:1c.2
[   12.501760]   IO window: b000-bfff
[   12.501765]   MEM window: fe100000-fe1fffff
[   12.501768]   PREFETCH window: disabled.
[   12.501772] PCI: Bridge: 0000:00:1c.3
[   12.501773]   IO window: disabled.
[   12.501777]   MEM window: disabled.
[   12.501780]   PREFETCH window: disabled.
[   12.501784] PCI: Bridge: 0000:00:1c.4
[   12.501786]   IO window: c000-cfff
[   12.501790]   MEM window: fe200000-fe9fffff
[   12.501794]   PREFETCH window: fbd00000-fdcfffff
[   12.501798] PCI: Bridge: 0000:00:1c.5
[   12.501799]   IO window: disabled.
[   12.501803]   MEM window: disabled.
[   12.501806]   PREFETCH window: disabled.
[   12.501810] PCI: Bridge: 0000:00:1e.0
[   12.501811]   IO window: disabled.
[   12.501816]   MEM window: fea00000-feafffff
[   12.501819]   PREFETCH window: disabled.
[   12.501834] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   12.501838] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   12.501854] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   12.501859] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   12.501876] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   12.501880] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   12.501897] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   12.501902] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   12.501918] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[   12.501923] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   12.501939] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   12.501943] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   12.501960] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[   12.501964] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   12.501974] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   12.501982] NET: Registered protocol family 2
[   12.539320] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   12.539511] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   12.539893] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   12.540099] TCP: Hash tables configured (established 131072 bind 65536)
[   12.540101] TCP reno registered
[   12.551377] checking if image is initramfs... it is
[   13.204119] Freeing initrd memory: 9053k freed
[   13.204257] Simple Boot Flag at 0x52 set to 0x1
[   13.204782] audit: initializing netlink socket (disabled)
[   13.204795] audit(1235647285.404:1): initialized
[   13.204948] highmem bounce pool size: 64 pages
[   13.206556] VFS: Disk quotas dquot_6.5.1
[   13.206622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   13.206730] io scheduler noop registered
[   13.206732] io scheduler anticipatory registered
[   13.206734] io scheduler deadline registered
[   13.206743] io scheduler cfq registered (default)
[   21.198294] 0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[   21.198467] Boot video device is 0000:01:00.0
[   21.198564] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   21.198598] assign_interrupt_mode Found MSI capability
[   21.198627] Allocate Port Service[0000:00:01.0:pcie00]
[   21.198654] Allocate Port Service[0000:00:01.0:pcie02]
[   21.198721] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   21.198759] assign_interrupt_mode Found MSI capability
[   21.198791] Allocate Port Service[0000:00:1c.0:pcie00]
[   21.198866] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   21.198905] assign_interrupt_mode Found MSI capability
[   21.198936] Allocate Port Service[0000:00:1c.1:pcie00]
[   21.199010] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   21.199048] assign_interrupt_mode Found MSI capability
[   21.199079] Allocate Port Service[0000:00:1c.2:pcie00]
[   21.199150] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   21.199188] assign_interrupt_mode Found MSI capability
[   21.199220] Allocate Port Service[0000:00:1c.3:pcie00]
[   21.199292] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   21.199331] assign_interrupt_mode Found MSI capability
[   21.199363] Allocate Port Service[0000:00:1c.4:pcie00]
[   21.199389] Allocate Port Service[0000:00:1c.4:pcie02]
[   21.199460] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   21.199500] assign_interrupt_mode Found MSI capability
[   21.199531] Allocate Port Service[0000:00:1c.5:pcie00]
[   21.199556] Allocate Port Service[0000:00:1c.5:pcie02]
[   21.199755] isapnp: Scanning for PnP cards...
[   21.552849] isapnp: No Plug & Play device found
[   21.572948] Real Time Clock Driver v1.12ac
[   21.573122] hpet_resources: 0xfed00000 is busy
[   21.573168] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   21.574175] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   21.574229] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   21.574310] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   21.577579] i8042.c: Detected active multiplexing controller, rev 1.1.
[   21.578211] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.578214] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   21.578216] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   21.578218] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   21.578220] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   21.598121] mice: PS/2 mouse device common for all mice
[   21.598214] EISA: Probing bus 0 at eisa.0
[   21.598238] Cannot allocate resource for EISA slot 8
[   21.598240] EISA: Detected 0 cards.
[   21.598243] cpuidle: using governor ladder
[   21.598244] cpuidle: using governor menu
[   21.598318] NET: Registered protocol family 1
[   21.598342] Using IPI No-Shortcut mode
[   21.598367] registered taskstats version 1
[   21.598479]   Magic number: 13:915:378
[   21.598547] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   21.598549] EDD information not available.
[   21.598729] Freeing unused kernel memory: 368k freed
[   21.598750] Write protecting the kernel read-only data: 806k
[   21.631874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   22.771536] fuse init (API version 7.9)
[   22.787443] ACPI: SSDT 3FFB63A0, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[   22.787706] ACPI: SSDT 3FFB66C0, 0712 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[   22.788613] Monitor-Mwait will be used to enter C-1 state
[   22.788616] Monitor-Mwait will be used to enter C-2 state
[   22.788707] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   22.788711] ACPI: Processor [P001] (supports 8 throttling states)
[   22.788922] ACPI: SSDT 3FFB62D0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
[   22.789171] ACPI: SSDT 3FFB6630, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
[   22.790295] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   22.790299] ACPI: Processor [P002] (supports 8 throttling states)
[   22.791383] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   22.793466] ACPI: Thermal Zone [THRM] (57 C)
[   23.023422] usbcore: registered new interface driver usbfs
[   23.023442] usbcore: registered new interface driver hub
[   23.023465] usbcore: registered new device driver usb
[   23.024740] USB Universal Host Controller Interface driver v3.0
[   23.024784] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   23.024794] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   23.024797] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   23.025013] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   23.025040] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
[   23.025153] usb usb1: configuration #1 chosen from 1 choice
[   23.025173] hub 1-0:1.0: USB hub found
[   23.025177] hub 1-0:1.0: 2 ports detected
[   23.085495] SCSI subsystem initialized
[   23.098131] libata version 3.00 loaded.
[   23.125320] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[   23.125332] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   23.125335] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   23.125356] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   23.125382] uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000e000
[   23.125484] usb usb2: configuration #1 chosen from 1 choice
[   23.125505] hub 2-0:1.0: USB hub found
[   23.125509] hub 2-0:1.0: 2 ports detected
[   23.229230] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[   23.229241] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   23.229245] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   23.229266] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   23.229292] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc00
[   23.229391] usb usb3: configuration #1 chosen from 1 choice
[   23.229410] hub 3-0:1.0: USB hub found
[   23.229414] hub 3-0:1.0: 2 ports detected
[   23.333161] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   23.333172] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   23.333176] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   23.333197] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   23.333223] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[   23.333320] usb usb4: configuration #1 chosen from 1 choice
[   23.333345] hub 4-0:1.0: USB hub found
[   23.333349] hub 4-0:1.0: 2 ports detected
[   23.366059] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   23.438086] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   23.438096] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   23.438099] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   23.438120] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[   23.438146] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[   23.438250] usb usb5: configuration #1 chosen from 1 choice
[   23.438270] hub 5-0:1.0: USB hub found
[   23.438274] hub 5-0:1.0: 2 ports detected
[   23.505143] usb 1-2: configuration #1 chosen from 1 choice
[   23.541184] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   23.541195] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   23.541198] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   23.541220] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[   23.545110] ehci_hcd 0000:00:1a.7: debug port 1
[   23.545116] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   23.545122] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
[   23.560935] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   23.561040] usb usb6: configuration #1 chosen from 1 choice
[   23.561062] hub 6-0:1.0: USB hub found
[   23.561067] hub 6-0:1.0: 4 ports detected
[   23.661003] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[   23.661017] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   23.661020] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   23.661043] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[   23.664958] ehci_hcd 0000:00:1d.7: debug port 1
[   23.664963] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   23.664968] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebff000
[   23.748830] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   23.760820] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   23.760952] usb usb7: configuration #1 chosen from 1 choice
[   23.760985] hub 7-0:1.0: USB hub found
[   23.760992] hub 7-0:1.0: 6 ports detected
[   23.792796] Clocksource tsc unstable (delta = -14073538447 ns)
[   23.796847] Time: hpet clocksource has been installed.
[   23.798836] ahci 0000:00:1f.2: version 3.0
[   23.798873] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 22
[   23.813134] usb 1-2: USB disconnect, address 2
[   23.823703] usb 6-2: new high speed USB device using ehci_hcd and address 2
[   23.956513] usb 6-2: configuration #1 chosen from 1 choice
[   24.108420] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[   24.108427] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part
[   24.108434] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   24.108669] scsi0 : ahci
[   24.108841] scsi1 : ahci
[   24.108965] scsi2 : ahci
[   24.109073] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 216
[   24.109076] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 216
[   24.109079] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 216
[   24.114171] usb 3-2: new low speed USB device using uhci_hcd and address 3
[   24.118566] usb 3-2: configuration #1 chosen from 1 choice
[   24.150963] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   24.152390] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[   24.153297] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[   24.153613] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[   24.154265] ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133
[   24.154267] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   24.155495] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[   24.156994] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[   24.157290] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[   24.157949] ata1.00: configured for UDMA/133
[   24.159283] usb 5-1: new full speed USB device using uhci_hcd and address 2
[   24.164150] usb 5-1: configuration #1 chosen from 1 choice
[   24.165579] usbcore: registered new interface driver hiddev
[   24.178480] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input2
[   24.180312] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2
[   24.180339] usbcore: registered new interface driver usbhid
[   24.180344] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   24.188393] ata2: SATA link down (SStatus 0 SControl 300)
[   24.194052] ata3: SATA link down (SStatus 0 SControl 300)
[   24.194238] scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.AL PQ: 0 ANSI: 5
[   24.194325] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   24.209399] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[   24.209405] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[   24.209413] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   24.209539] scsi3 : ahci
[   24.209577] ata4: SATA max UDMA/133 abar m8192@0xfe1fe000 port 0xfe1fe100 irq 18
[   24.215055] ata4: SATA link down (SStatus 0 SControl 300)
[   24.215139] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   24.215186] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   24.215196] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   24.216517] ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   24.269220] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   24.277709] ata_piix 0000:00:1f.1: version 2.12
[   24.277724] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   24.277755] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   24.277955] scsi4 : ata_piix
[   24.278018] scsi5 : ata_piix
[   24.278547] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   24.278550] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   24.279451] Driver 'sd' needs updating - please use bus_type methods
[   24.279520] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   24.279530] sd 0:0:0:0: [sda] Write Protect is off
[   24.279532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.279547] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.279586] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   24.279595] sd 0:0:0:0: [sda] Write Protect is off
[   24.279597] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.279611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.279614]  sda: sda1 sda2 < sda5 >
[   24.359356] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.362653] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.596010] ata5.00: ATAPI: MATSHITADVD-RAM UJ-860S, 1.00, max UDMA/33
[   24.602511] ata5.00: configured for UDMA/33
[   24.602577] ata6: port disabled. ignoring.
[   24.603882] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-860S  1.00 PQ: 0 ANSI: 5
[   24.603949] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   24.609413] Driver 'sr' needs updating - please use bus_type methods
[   24.613370] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   24.613372] Uniform CD-ROM driver Revision: 3.20
[   24.613409] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   24.783991] Attempting manual resume
[   24.783995] swsusp: Resume From Partition 8:5
[   24.783996] PM: Checking swsusp image.
[   24.784132] PM: Resume from disk failed.
[   24.828868] kjournald starting.  Commit interval 5 seconds
[   24.828889] EXT3-fs: mounted filesystem with ordered data mode.
[   25.328262] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003b73a1e]
[   31.331837] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   31.348335] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.366200] Linux agpgart interface v0.102
[   31.413654] input: Power Button (FF) as /devices/virtual/input/input3
[   31.442174] ACPI: Power Button (FF) [PWRF]
[   31.442280] input: Sleep Button (CM) as /devices/virtual/input/input4
[   31.474143] ACPI: Sleep Button (CM) [SLPB]
[   31.474207] input: Lid Switch as /devices/virtual/input/input5
[   31.475769] ACPI: Lid Switch [LID]
[   31.489225] asus-laptop: Asus Laptop Support version 0.42
[   31.489468] asus-laptop:   F3Sr model detected
[   31.492492] Registered led device: asus:mail
[   31.745571] ACPI: Battery Slot [BAT0] (battery present)
[   31.752931] ACPI: AC Adapter [AC0] (on-line)
[   31.850081] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/LNXVIDEO:00/input/input6
[   31.880930] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   31.943098] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   31.972737] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[   31.972780] [fglrx] ASYNCIO init succeed!
[   31.973641] [fglrx] PAT is enabled successfully!
[   31.973661] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   32.069017] Linux video capture interface: v2.00
[   32.118725] iTCO_vendor_support: vendor-support=0
[   32.129699] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   32.129787] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[   32.129822] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   32.157754] ricoh-mmc: Ricoh MMC Controller disabling driver
[   32.157758] ricoh-mmc: Copyright(c) Philip Langdale
[   32.157806] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
[   32.157816] ricoh-mmc: Controller is now disabled.
[   32.229560] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   32.229572] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   32.229587] atl1 0000:02:00.0: version 2.0.7
[   32.339436] sdhci: Secure Digital Host Controller Interface driver
[   32.339440] sdhci: Copyright(c) Pierre Ossman
[   32.339480] sdhci: SDHCI controller found at 0000:09:01.1 [1180:0822] (rev 22)
[   32.339498] ACPI: PCI Interrupt 0000:09:01.1[B] -> GSI 17 (level, low) -> IRQ 17
[   32.339516] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   32.339556] mmc0: SDHCI at 0xfeaff400 irq 17 DMA
[   32.371997] Bluetooth: Core ver 2.11
[   32.374174] NET: Registered protocol family 31
[   32.374177] Bluetooth: HCI device and connection manager initialized
[   32.374181] Bluetooth: HCI socket layer initialized
[   32.467216] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
[   32.469165] usbcore: registered new interface driver uvcvideo
[   32.469170] USB Video Class driver (v0.1.0)
[   32.509744] Bluetooth: HCI USB driver ver 2.9
[   32.517577] usbcore: registered new interface driver hci_usb
[   32.524516] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[   32.524519] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   32.524598] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   32.524606] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   32.524624] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   32.526196] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   32.754316] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[   32.754337] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   33.267322] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   33.333613] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   33.541869] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[   33.543125] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[   33.602769] lp: driver loaded but no devices found
[   33.685880] Adding 3028212k swap on /dev/sda5.  Priority:-1 extents:1 across:3028212k
[   34.165487] EXT3 FS on sda1, internal journal
[   34.300785] device-mapper: uevent: version 1.0.3
[   34.300811] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   35.092517] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.505628] No dock devices found.
[   36.336715] apm: BIOS not found.
[   36.543363] ppdev: user-space parallel port driver
[   36.664852] audit(1235647327.270:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5520 profile="/usr/sbin/cupsd" namespace="default"
[   37.899138] Bluetooth: L2CAP ver 2.9
[   37.899146] Bluetooth: L2CAP socket layer initialized
[   38.064714] Bluetooth: RFCOMM socket layer initialized
[   38.064735] Bluetooth: RFCOMM TTY layer initialized
[   38.064739] Bluetooth: RFCOMM ver 1.8
[   39.954335] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   42.082734] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   42.082746] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   42.082748] [fglrx] Reserve Block - 2 offset =  0X7f7a000 length = 0X80000
[   42.501659] [fglrx] interrupt source 10000000 successfully enabled
[   42.501671] [fglrx] enable ID = 0x00000006
[   42.501686] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   42.521948] [fglrx] interrupt source 60000001 successfully enabled
[   42.521957] [fglrx] enable ID = 0x00000007
[   42.521967] [fglrx] Receive enable interrupt message with irqEnableMask: 60000001
[   42.522057] [fglrx] interrupt source 00000040 successfully enabled
[   42.522062] [fglrx] enable ID = 0x00000008
[   42.522070] [fglrx] Receive enable interrupt message with irqEnableMask: 00000040
[   42.526455] [fglrx] interrupt source ff00002c successfully enabled
[   42.526464] [fglrx] enable ID = 0x00000009
[   42.526472] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002c
[   42.526551] [fglrx] interrupt source ff00002d successfully enabled
[   42.526556] [fglrx] enable ID = 0x0000000A
[   42.526564] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002d
[   42.526637] [fglrx] interrupt source 20000400 successfully enabled
[   42.526642] [fglrx] enable ID = 0x0000000B
[   42.526650] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400
[   56.255949] NET: Registered protocol family 10
[   56.256915] lo: Disabled Privacy Extensions
[   56.258078] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   56.259355] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   70.183289] CPU0 attaching NULL sched-domain.
[   70.183300] CPU1 attaching NULL sched-domain.
[   70.201020] CPU0 attaching sched-domain:
[   70.201028]  domain 0: span 03
[   70.201032]   groups: 01 02
[   70.201039] CPU1 attaching sched-domain:
[   70.201043]  domain 0: span 03
[   70.201048]   groups: 02 01
[   72.092877] NET: Registered protocol family 17
[   74.413039] wlan0: Initial auth_alg=0
[   74.413045] wlan0: authenticate with AP 00:1e:40:65:2a:4d
[   74.415010] wlan0: RX authentication from 00:1e:40:65:2a:4d (alg=0 transaction=2 status=0)
[   74.415013] wlan0: authenticated
[   74.415015] wlan0: associate with AP 00:1e:40:65:2a:4d
[   74.417462] wlan0: RX AssocResp from 00:1e:40:65:2a:4d (capab=0x411 status=0 aid=1)
[   74.417465] wlan0: associated
[   74.417468] wlan0: CTS protection enabled (BSSID=00:1e:40:65:2a:4d)
[   74.419260] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   78.059376] wlan0: no IPv6 routers present

[gokhanyildiz]

ekran görüntüleri:
http://www.gokhan-yildiz.com/hata1.jpg
http://www.gokhan-yildiz.com/hata2.jpg
http://www.gokhan-yildiz.com/hata3.jpg

kusura bakmayın biraz yansımam çıkmış

[heartsmagic]

Pek kafaya takmaya gerek yok diye düşünüyorum. Sistemde herhangi bir sorun mevcut mu şu anda bununla ilgili?

[bytan]

Ekran görüntüsünü aldığınız ile buraya aktardığınız dmesg sanki farklı. Yani resimler ve çıktılar aynı açlıışa ait değil gibi görünüyor.

İlk resimdeki hata mesajın, dmesg çıktında şu an sorunsuz görünüyor:

Kod Seç Genişlet

[   23.366059] usb 1-2: new full speed USB device using uhci_hcd and address 2

Üçüncü resmin ilk satırından sonrası  her hangi bir sorun göstermiyor. Her şey normal.

İkinci resimde ise tek bir hata var. O da usplash temanı bulamamış. Çok önemli değil. usplash diye aratırsan kendine yeni bir tema seçerek bu hatayı düzeltirsin. Biraz altındaki no resume image ise sorun değil, normal bir çıktı.

Ses sorununa dönersek, o başlığa geri git ve sana dediklerimi tekrar gözden geçir. Zira henüz derlemeyi yapamadığın için ses alamıyorsun.

Düzenleme: Ben yazarken mesajımı uzun uzun; tek cümleyle açıklamış @heartsmagic. 

[gokhanyildiz]

sadece yazıların zaman almasından başka bir sıkıntı yok.açılırken ve kapanırken 10 snlik bir gecikme oluyor okadar.

[heartsmagic]

Ben geçiştirmişim sen doğrusunu yapmışsın @bytan