[Çözüldü] DVD Yazma Sorunu (K3B,Brasero)

[Sherlock Holmes]

Birçok kere yazmış olduğum DVD Cd'lerine uzun uğraşlarıma rağmen yazma işleminde Hata alıyorum.
K3B - Brasero - Nautilus.Her uygulamada aynı Hata mesajını alıyorum ''Error While Burning''
Fakat DVD harici diğer tüm Cd'lerde hiçbir Hata ile karşılaşmadım ve yazma işlemi tamamlandı.

dmesg çıktıları ise:

Kod Seç Genişlet

[    6.700000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    6.700000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    6.704000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    6.704000] sd 0:0:0:0: [sda] Write Protect is off
[    6.704000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.704000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.704000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    6.704000] sd 0:0:0:0: [sda] Write Protect is off
[    6.704000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.704000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.704000]  sda: sda1 sda2 < sda5 >
[    6.748000] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.752000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.760000] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:93:e0:15
[    6.820000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    6.820000] ata_piix 0000:00:1f.1: version 2.11
[    6.820000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    6.820000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    6.820000] scsi4 : ata_piix
[    6.820000] scsi5 : ata_piix
[    6.820000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[    6.820000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[    7.000000] Attempting manual resume
[    7.000000] swsusp: Resume From Partition 8:5
[    7.000000] PM: Checking swsusp image.
[    7.000000] PM: Resume from disk failed.
[    7.048000] kjournald starting.  Commit interval 5 seconds
[    7.048000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.140000] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
[    7.312000] ata5.00: configured for MWDMA2
[    7.312000] ata6: port disabled. ignoring.
[    7.316000] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
[    7.316000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[    7.316000] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[    7.316000] PCI: Setting latency timer of device 0000:07:05.0 to 64
[    7.368000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    8.644000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc000eb6dbd00]
[   14.132000] iTCO_vendor_support: vendor-support=0
[   14.132000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   14.132000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   14.132000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.156000] intel_rng: FWH not detected
[   14.404000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.408000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.512000] Linux agpgart interface v0.102 (c) Dave Jones
[   14.616000] sdhci: Secure Digital Host Controller Interface driver
[   14.616000] sdhci: Copyright(c) Pierre Ossman
[   14.616000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[   14.616000] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[   14.616000] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[   14.616000] PCI: Setting latency timer of device 0000:07:05.1 to 64
[   14.616000] mmc0: SDHCI at 0xde000800 irq 17 DMA
[   14.732000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   14.732000] Uniform CD-ROM driver Revision: 3.20
[   14.732000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   14.796000] Linux video capture interface: v2.00
[   14.848000] ieee80211_crypt: registered algorithm 'NULL'
[   14.852000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   14.852000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   14.916000] nvidia: module license 'NVIDIA' taints kernel.
[   15.168000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.168000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   15.168000] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   15.172000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[   15.172000] usbcore: registered new interface driver uvcvideo
[   15.172000] USB Video Class driver (v0.1.0)
[   15.184000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp
[   15.184000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   15.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.184000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   15.188000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   15.416000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   15.464000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   15.464000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   15.480000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[   16.000000] lp: driver loaded but no devices found
[   16.068000] Adding 4546352k swap on /dev/sda5.  Priority:-1 extents:1 across:4546352k
[   16.444000] EXT3 FS on sda1, internal journal
[   17.040000] ipw3945: Radio Frequency Kill Switch is On:
[   17.040000] Kill switch must be turned off for wireless networking to work.
[   17.564000] No dock devices found.
[   17.580000] ACPI: Battery Slot [BAT0] (battery absent)
[   17.648000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   17.648000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   17.708000] ACPI: AC Adapter [ACAD] (on-line)
[   17.760000] input: Power Button (FF) as /class/input/input3
[   17.760000] ACPI: Power Button (FF) [PWRF]
[   17.760000] input: Power Button (CM) as /class/input/input4
[   17.760000] ACPI: Power Button (CM) [PWRB]
[   17.760000] input: Sleep Button (CM) as /class/input/input5
[   17.760000] ACPI: Sleep Button (CM) [SLPB]
[   17.760000] input: Lid Switch as /class/input/input6
[   17.760000] ACPI: Lid Switch [liD]
[   18.936000] Failure registering capabilities with primary security module.
[   19.140000] ppdev: user-space parallel port driver
[   19.244000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   19.244000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[   19.428000] audit(1213522931.467:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5065 profile="/usr/sbin/cupsd"
[   19.492000] apm: BIOS not found.
[   19.808000] Bluetooth: Core ver 2.11
[   19.808000] NET: Registered protocol family 31
[   19.808000] Bluetooth: HCI device and connection manager initialized
[   19.808000] Bluetooth: HCI socket layer initialized
[   19.820000] Bluetooth: L2CAP ver 2.8
[   19.820000] Bluetooth: L2CAP socket layer initialized
[   19.976000] Bluetooth: RFCOMM socket layer initialized
[   19.976000] Bluetooth: RFCOMM TTY layer initialized
[   19.976000] Bluetooth: RFCOMM ver 1.8
[   25.384000] NET: Registered protocol family 17
[  964.424000] ata5.00: 16 bytes trailing data
[ 1802.172000] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1802.172000] ata5.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 1802.172000]          res 00/01:01:01:14:eb/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[ 1802.172000] ata5: soft resetting port
[ 1802.664000] ata5.00: configured for MWDMA2
[ 1802.664000] ata5: EH complete
[ 1886.016000] cdrom: This disc doesn't have any tracks I recognize!
[ 1886.236000] attempt to access beyond end of device
[ 1886.236000] sr0: rw=0, want=68, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4607396, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4606372, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4606148, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4607388, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4606364, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4606140, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4606796, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4605772, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4605548, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4606788, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4605764, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=4605540, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3780444, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3779420, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3779196, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3780436, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3779412, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3779188, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3779844, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3778820, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3778596, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3779836, limit=4
[ 1886.256000] attempt to access beyond end of device
[ 1886.256000] sr0: rw=0, want=3778812, limit=4
[ 1886.260000] attempt to access beyond end of device
[ 1886.260000] sr0: rw=0, want=3778588, limit=4
[ 1886.260000] attempt to access beyond end of device
[ 1886.260000] sr0: rw=0, want=1252, limit=4
[ 1886.260000] attempt to access beyond end of device
[ 1886.260000] sr0: rw=0, want=1028, limit=4
[ 1886.260000] UDF-fs: No partition found (1)
[ 1886.272000] attempt to access beyond end of device
[ 1886.272000] sr0: rw=0, want=68, limit=4
[ 1886.272000] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
[ 1905.204000] ata5.00: 16 bytes trailing data
[ 1905.504000] ata5.00: 16 bytes trailing data
[ 2052.368000] ata5.00: 16 bytes trailing data
[ 2071.856000] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[ 2071.856000] sr: Sense Key : Medium Error [deferred]
[ 2071.856000] sr: Add. Sense: Write error
[ 2480.528000] cdrom: This disc doesn't have any tracks I recognize!
[ 2667.200000] cdrom: This disc doesn't have any tracks I recognize!
[ 2675.396000] ata5.00: 16 bytes trailing data
[ 2675.560000] ata5.00: 16 bytes trailing data
[ 2733.808000] ata5.00: 16 bytes trailing data
[ 2733.920000] ata5.00: 16 bytes trailing data
[ 2909.136000] cdrom: This disc doesn't have any tracks I recognize!
[ 2918.572000] ata5.00: 16 bytes trailing data
[ 2918.756000] ata5.00: 16 bytes trailing data
[ 3047.984000] ata5.00: 16 bytes trailing data
[ 3067.000000] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[ 3067.000000] sr: Sense Key : Medium Error [deferred]
[ 3067.000000] sr: Add. Sense: Write error
[ 3071.524000] ata5.00: 16 bytes trailing data
[ 3159.324000] cdrom: This disc doesn't have any tracks I recognize!
[ 3324.160000] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[ 3324.160000] sr: Sense Key : Medium Error [deferred]
[ 3324.160000] sr: Add. Sense: Write error
[ 3362.748000] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 3362.748000] ata5.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
[ 3362.748000]          res 00/01:01:01:14:eb/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[ 3362.748000] ata5: soft resetting port
[ 3363.240000] ata5.00: configured for MWDMA2
[ 3363.240000] ata5: EH complete
[ 3391.888000] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 3391.888000] ata5.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
[ 3391.888000]          res 00/01:01:01:14:eb/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[ 3391.888000] ata5: soft resetting port
[ 3392.380000] ata5.00: configured for MWDMA2
[ 3392.380000] ata5: EH complete
[ 3407.316000] cdrom: This disc doesn't have any tracks I recognize!
[ 3934.624000] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 3934.624000] ata5.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
[ 3934.624000]          res 00/01:01:01:14:eb/00:00:00:00:00/00 Emask 0x2 (HSM violation)
[ 3934.624000] ata5: soft resetting port
[ 3935.120000] ata5.00: configured for MWDMA2
[ 3935.120000] ata5: EH complete
[ 3959.460000] UDF-fs: No VRS found
[ 3959.476000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3959.524000] ISO 9660 Extensions: RRIP_1991A
[ 4565.836000] cdrom: This disc doesn't have any tracks I recognize!
[ 5053.752000] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 5053.752000] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 5053.752000] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 5053.752000] end_request: I/O error, dev sr0, sector 64
[ 5053.752000] Buffer I/O error on device sr0, logical block 16
[ 5053.752000] Buffer I/O error on device sr0, logical block 17
[ 5055.012000] UDF-fs: No VRS found
[ 5055.032000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5055.036000] ISO 9660 Extensions: RRIP_1991A
[ 5056.716000] VFS: busy inodes on changed media.
[ 5056.836000] sr 4:0:0:0: [sr0] Device not ready: <6>: Sense Key : Not Ready [current]
[ 5056.836000] : Add. Sense: Medium not present
[ 5056.836000] end_request: I/O error, dev sr0, sector 112
[ 5056.852000] VFS: busy inodes on changed media.
[ 5056.856000] sr 4:0:0:0: [sr0] Device not ready: <6>: Sense Key : Not Ready [current]
[ 5056.856000] : Add. Sense: Medium not present
[ 5056.856000] end_request: I/O error, dev sr0, sector 112
[ 5056.888000] VFS: busy inodes on changed media.
[ 5056.912000] VFS: busy inodes on changed media.
[ 5056.940000] VFS: busy inodes on changed media.
[ 5058.000000] sr 4:0:0:0: [sr0] Device not ready: <6>: Sense Key : Not Ready [current]
[ 5058.000000] : Add. Sense: Medium not present
[ 5058.000000] end_request: I/O error, dev sr0, sector 112
[ 5058.068000] sr 4:0:0:0: [sr0] Device not ready: <6>: Sense Key : Not Ready [current]
[ 5058.068000] : Add. Sense: Medium not present
[ 5058.068000] end_request: I/O error, dev sr0, sector 112
[ 5058.700000] VFS: busy inodes on changed media.
[ 5058.724000] VFS: busy inodes on changed media.
[ 5060.700000] VFS: busy inodes on changed media.
[ 5060.724000] VFS: busy inodes on changed media.
[ 5062.700000] VFS: busy inodes on changed media.
[ 5062.728000] VFS: busy inodes on changed media.
[ 5064.700000] VFS: busy inodes on changed media.
[ 5064.728000] VFS: busy inodes on changed media.
[ 5066.700000] VFS: busy inodes on changed media.
[ 5066.724000] VFS: busy inodes on changed media.
[ 5068.700000] VFS: busy inodes on changed media.
[ 5068.724000] VFS: busy inodes on changed media.
[ 5070.696000] VFS: busy inodes on changed media.
[ 5070.724000] VFS: busy inodes on changed media.
[ 5093.960000] VFS: busy inodes on changed media.
[ 5649.504000] cdrom: This disc doesn't have any tracks I recognize!
[ 5660.804000] ata5.00: 16 bytes trailing data
[ 5660.944000] ata5.00: 16 bytes trailing data
[ 5731.760000] ata5.00: 16 bytes trailing data
[ 5750.308000] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[ 5750.308000] sr: Sense Key : Medium Error [deferred]
[ 5750.308000] sr: Add. Sense: Write error
[ 5806.576000] ata5.00: 16 bytes trailing data
[ 5806.628000] cdrom: This disc doesn't have any tracks I recognize!
[ 5836.716000] ata5.00: 16 bytes trailing data
[ 5836.824000] ata5.00: 16 bytes trailing data
[ 5899.824000] ata5.00: 16 bytes trailing data
[ 5917.564000] sr0: CDROM (ioctl) error, command: Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40
[ 5917.564000] sr: Sense Key : Medium Error [deferred]
[ 5917.564000] sr: Add. Sense: Write error
[ 5918.704000] ata5.00: 16 bytes trailing data
[ 5992.280000] cdrom: This disc doesn't have any tracks I recognize!
[ 5997.344000] attempt to access beyond end of device
[ 5997.344000] sr0: rw=0, want=68, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4607396, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4606372, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4606148, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4607388, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4606364, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4606140, limit=4
[ 5997.352000] attempt to access beyond end of device
[ 5997.352000] sr0: rw=0, want=4606796, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=4605772, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=4605548, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=4606788, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=4605764, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=4605540, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3780444, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3779420, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3779196, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3780436, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3779412, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3779188, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3779844, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3778820, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3778596, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3779836, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3778812, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=3778588, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=1252, limit=4
[ 5997.356000] attempt to access beyond end of device
[ 5997.356000] sr0: rw=0, want=1028, limit=4
[ 5997.356000] UDF-fs: No partition found (1)
[ 5997.372000] attempt to access beyond end of device
[ 5997.372000] sr0: rw=0, want=68, limit=4
[ 5997.372000] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
[ 6037.708000] attempt to access beyond end of device
[ 6037.708000] sr0: rw=0, want=68, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4607396, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4606372, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4606148, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4607388, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4606364, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4606140, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4606796, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4605772, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4605548, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4606788, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4605764, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=4605540, limit=4
[ 6037.720000] attempt to access beyond end of device
[ 6037.720000] sr0: rw=0, want=3780444, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3779420, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3779196, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3780436, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3779412, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3779188, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3779844, limit=4
[ 6037.724000] attempt to access beyond end of device
[ 6037.724000] sr0: rw=0, want=3778820, limit=4
[ 6037.728000] attempt to access beyond end of device
[ 6037.728000] sr0: rw=0, want=3778596, limit=4
[ 6037.728000] attempt to access beyond end of device
[ 6037.728000] sr0: rw=0, want=3779836, limit=4
[ 6037.728000] attempt to access beyond end of device
[ 6037.728000] sr0: rw=0, want=3778812, limit=4
[ 6037.728000] attempt to access beyond end of device
[ 6037.728000] sr0: rw=0, want=3778588, limit=4
[ 6037.728000] attempt to access beyond end of device
[ 6037.728000] sr0: rw=0, want=1252, limit=4
[ 6037.728000] attempt to access beyond end of device
[ 6037.728000] sr0: rw=0, want=1028, limit=4
[ 6037.728000] UDF-fs: No partition found (1)
[ 6037.740000] attempt to access beyond end of device
[ 6037.740000] sr0: rw=0, want=68, limit=4
[ 6037.740000] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
[ 6539.868000] ata5.00: 16 bytes trailing data
[ 6540.032000] ata5.00: 16 bytes trailing data
[ 6644.212000] attempt to access beyond end of device
[ 6644.212000] sr0: rw=0, want=68, limit=4
[ 6644.220000] attempt to access beyond end of device
[ 6644.220000] sr0: rw=0, want=4607396, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4606372, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4606148, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4607388, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4606364, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4606140, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4606796, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4605772, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4605548, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4606788, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4605764, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=4605540, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3780444, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3779420, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3779196, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3780436, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3779412, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3779188, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3779844, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3778820, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3778596, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3779836, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3778812, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=3778588, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=1252, limit=4
[ 6644.224000] attempt to access beyond end of device
[ 6644.224000] sr0: rw=0, want=1028, limit=4
[ 6644.224000] UDF-fs: No partition found (1)
[ 6644.240000] attempt to access beyond end of device
[ 6644.240000] sr0: rw=0, want=68, limit=4
[ 6644.240000] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
[ 6700.500000] cdrom: This disc doesn't have any tracks I recognize!
Bu şekilde.

Belirtmiş olduğum gibi sadece DVD'lere yazmıyor ama öncede yazıyordu.Sizce ne yapmalıyım??

Teşekürler

[ufuk_k]

Yazmadığı gibi okumuyor da görünüyor boş diskleri. Donanım sorunu da olabilir, fakat buna karar vermeden önce yazılım olasılıklarını denemek gerek.

Kod Seç Genişlet

sudo apt-get --purge remove libdvdread3
sudo apt-get --purge remove libdvdcss2  gibi paketleri bu komutla ya da synapticten tamamen kaldır diyerek kaldırıp, tekrar kurmayı dene.

[Sherlock Holmes]

There was an error writing to the disc:
Unhandled error, aborting

Donanımla ilgili ne gibi bir hata oluşmuş olabilirki?
Çünkü daha önceden bu şekil bir hata ile karşılaşmamıştım ve DVD'lere yazabiliyordum. Hatta CD'nin markası da aynı idi.
Yazma işlemi için önceden herhangi bir kurcalamada yapmadım.
Ubuntu'da Cd/Rom için Firmware update gibi seçeneğimiz varmıdır? belki sorunumu bu şekilde düzeltirim

[ufuk_k]

Yazdıklarımı uyguladın mı?

[Sherlock Holmes]

Evet
libdvdcss2 , libdvdread3 Dosyalarını kaldırıp tekrar yükledim + Vlc media player'ı tekrar yüklemek zorunda kaldım
değişiklik olmadı 

[heartsmagic]

Şöyle dener misin bir de:

Kod Seç Genişlet

growisofs -Z /dev/sr0 -R -J /yazılacak/dizin

[Sherlock Holmes]

Maalesef 
Farklı bir marka DVD Cd'si alıp deneyeceğim,umarım bu şekilde sorunumu halledebilirim.
Teşekkürler 

[heartsmagic]

Maalesef 
Farklı bir marka DVD Cd'si alıp deneyeceğim,umarım bu şekilde sorunumu halledebilirim.
Teşekkürler 

Hata ne döndürdü? İlk mesajında verdiğinin aynısı mı?

[Sherlock Holmes]

Terminale girdiğiğm  - mount /dev/cdrom -   komutu sonucunda
mount: block device /dev/scd0 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/scd0,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

Yazma korumalı diye bilgi alıyorum,bu korumayı nasıl kaldırabilirim? (bu arada farklı bir marka DVD Disc denedim)

K3B'de aldığım hata : [IMG]http://img27.picoodle.com/img/img27/4/6/22/t_Screenshot1m_4b66738.png[/img]

Brasero'da aldığım hata : [IMG]http://img37.picoodle.com/img/img37/4/6/22/t_Screenshotm_b4e6e57.png[/img]

Öncedende belirtmiş olduğum gibi sadece DVD'lerde bir hata oluşuyor.
Cd'lere yazabiliyorum 

missing codepage or helper program    ile bir ilgisi olabileceğine dair bakındım ama birşey bulamadım.

[ufuk_k]

Kod Seç Genişlet

sudo mkdir /media/asd
sudo mount /dev/cdrom /media/asd -t iso9660 komutlarıyla bağlamayı dener misin (/media/asd dizini altında).

Ayrıca /boot/grub/menu.lst dosyasındaki 2 kernel satırını buraya kopyalar mısın ? (en yeni olanı ve onden önce kullandıgın kernelin satırlarını).

[Sherlock Holmes]

Ubuntu 7.10, kernel 2.6.22-15-generic
Ubuntu 7.10, kernel 2.6.22-14-generic

verdiğiniz   - sudo mkdir /media/asd - komuduyla /media/asd diye bir konum oluşturdum ,ama
- sudo mount /dev/cdrom /media/asd -t iso9660 - aynı yanıtı verdi,
mount: block device /dev/scd0 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/scd0,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

[heartsmagic]

1. Yazma korumalı demesi çok normal zira DVD veya CD bağlıyorsun.
2. Verdiğin hata resimlerinden bir şey anlayamayız, altındaki hata kayıtlarını görmemiz lazım.
3. /dev/cdrom yerine /dev/scd0 dene
4. Neden benim dediğim komutun hata çıktısını göstermiyorsun?

[Sherlock Holmes]

Kod Seç Genişlet

packerd@Pavilion:~$ k3b
kbuildsycoca running...
packerd@Pavilion:~$ kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4084N to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 0, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/scd0 feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0 unknown profile: 2
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 40
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 36
(K3bDevice::Device) /dev/scd0:  Number of supported write speeds via GET PERFORMANCE: 2
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/scd0 to 11080
/dev/scd0 resolved to /dev/scd0
(K3bDevice::DeviceManager) dev /dev/scd0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST DVDRAM GSA-4084N
Devices:
------------------------------
Blockdevice:    /dev/scd0
Generic device:
Vendor:         HL-DT-ST
Description:    DVDRAM GSA-4084N
Version:        KQ09
Write speed:    11080
Profiles:       DVD-ROM, DVD-R Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+RW Dual Layer, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:      DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/scd0
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 553:42:61 (LBA 2491711) (5103024128 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 553:42:61 (LBA 2491711) (5103024128 Bytes)
(K3bDevice::ScsiCommand) failed:
                           command:    READ DVD STRUCTURE (ad)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        24
                           ascq:       0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
DiskInfo:
Mediatype:       DVD+R
Current Profile: DVD+R
Disk state:      empty
Empty:           1
Rewritable:      0
Appendable:      0
Sessions:        0
Tracks:          0
Layers:          1
Capacity:        510:01:29 (LBA 2295104) (4700372992 Bytes)
Remaining size:  510:01:29 (LBA 2295104) (4700372992 Bytes)
Used Size:       00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 40
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 36
(K3bDevice::Device) /dev/scd0:  Number of supported write speeds via GET PERFORMANCE: 2
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::DeviceManager) request for empty device!
(K3bDevice::DeviceManager) request for empty device!
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 553:42:61 (LBA 2491711) (5103024128 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 553:42:61 (LBA 2491711) (5103024128 Bytes)
(K3bDevice::ScsiCommand) failed:
                           command:    READ DVD STRUCTURE (ad)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        24
                           ascq:       0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 40
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 36
(K3bDevice::Device) /dev/scd0:  Number of supported write speeds via GET PERFORMANCE: 2
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
(K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4084N
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVDRAM_GSA_4084N
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 553:42:61 (LBA 2491711) (5103024128 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 553:42:61 (LBA 2491711) (5103024128 Bytes)
(K3bDevice::ScsiCommand) failed:
                           command:    READ DVD STRUCTURE (ad)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
(K3bDevice::ScsiCommand) failed:
                           command:    READ DVD STRUCTURE (ad)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       0
(K3bDevice::Device) /dev/scd0: READ DVD STRUCTURE length det failed
(K3bDevice::ScsiCommand) failed:
                           command:    READ TRACK INFORMATION (52)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       0
(K3bDevice::Device) /dev/scd0: READ TRACK INFORMATION length det failed.
(K3bDevice::ScsiCommand) failed:
                           command:    READ TRACK INFORMATION (52)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       0
(K3bDevice::Device) /dev/scd0: READ TRACK INFORMATION with real length 36 failed.
DiskInfo:
Mediatype:       DVD+R
Current Profile: DVD+R
Disk state:      empty
Empty:           1
Rewritable:      0
Appendable:      0
Sessions:        0
Tracks:          0
Layers:          1
Capacity:        35:03:64 (LBA 157789) (323151872 Bytes)
Remaining size:  35:03:64 (LBA 157789) (323151872 Bytes)
Used Size:       00:00:00 (LBA 0) (0 Bytes)
removing udi /org/freedesktop/Hal/devices/volume_empty_dvd_plus_r
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 72
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported length: 68
(K3bDevice::Device) /dev/scd0:  Number of supported write speeds via GET PERFORMANCE: 4
(K3bDevice::Device) /dev/scd0 : 4234 KB/s
(K3bDevice::Device) /dev/scd0 : 2822 KB/s
(K3bDevice::Device) /dev/scd0 : 1764 KB/s
(K3bDevice::Device) /dev/scd0 Invalid DVD speed: 706 KB/s


[heartsmagic]

invalid dvd speed demesi garip.
Bak ben bir iki mesaj önce bir yöntem önerdim, onunla deneyip hata kaydını gösterir misin?

[Sherlock Holmes]

root@Pavilion:/home/packerd# /dev/scd0
bash: /dev/scd0: Permission denied

[heartsmagic]

Öyle değil.

Kod Seç Genişlet

sudo mount /dev/scd0 /media/cdrom

Bak ben 3-4 mesaj önce bir komut söyledim, onu hala denemedin:

Kod Seç Genişlet

growisofs -Z -speed=6 /dev/sr0 -R -J /yazılacak/dizin

DVD'ye yazacaklarını bir dizine topla ve yukarıdaki şekilde komutu ver.

[heartsmagic]

Şimdi fark ettim de ilk mesajlarında aygıt sr0 görünüyor, son mesajların scd0?

[Sherlock Holmes]

Bu da braseronun vermiş olduğu hata
(brasero:9487): Pango-CRITICAL **: pango_layout_set_markup_with_accel: assertion `markup != NULL' failed
gnome-mount 0.6
Device /dev/scd0 is in /etc/fstab with mount point "/media/cdrom0"
Ejected /dev/scd0 (using /etc/fstab).

Şu komutta - sudo mount /dev/scd0 /media/cdrom - ise vermiş olduğu
mount: block device /dev/scd0 is write-protected, mounting read-only
mount: you must specify the filesystem type

- growisofs -Z -speed=6 /dev/sr0 -R -J /yazılacak/dizin - bu komutu girdiğimde ise hiçbirşey yapmamakta,sadece|   >   |bunu gösteriyor.

Birde libdvdcss2 , libdvdread3 kaldırıp tekrar yüklemek istediğimde -libdvdcss2- dosyası için şunu belirtiyor,
Package libdvdcss2 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package libdvdcss2 has no installation candidate
ilginç çünkü daha geçenlerde tekrar yüklemiştim,Synaptic'te aratığımda mevcut olmadığınıda fark ettim.
En iyisi ben kendim bu sorunla ilgili fazla kurcalamayıp(kurcaladıkça birşeyler eksiliyor)tamamen sizlerin beni yönlendirmenizi bekliyeceğim. 
umarım bu sorunu çözebiliriz

[ufuk_k]

Medibuntu depolarını tekrar ekle, lidvdcss2 ve diğer codecler için.

[heartsmagic]

Komutu doğru verdiğine emin misin?
Ve /yazılacak/dizin yerine DVD verilerinin olduğu dizini yazdın mı?

[Sherlock Holmes]

Örneğin:
growisofs -Z -speed=6 /dev/sr0 -R -J /home/packerd/Videos/Movies/Child's Play
şeklinde doğru olduğunu tahmin ediyorum,yoksa yanılıyormuyum ?

[Sherlock Holmes]

medibuntu depolarını eklemek için,

- sudo gedit /etc/apt/sources.list -

## PLF REPOSITORY (Unsupported.  May contain illegal packages.  Use at own risk.)
deb http://packages.medibuntu.org/ gutsy free non-free

komutları doğrumudur? yalnış birşey yapmamak için sormaktayım 

[ufuk_k]

Sana şiddetle Kurulum sonrası yapılması gereken bir kaç şey başlığına bakmanı öneriyorum.

[heartsmagic]

Eğer Child's Play şeklinde verdiysen dizini bulamamıştır. Tam yolu " işaretleri arasında belirt.

[Sherlock Holmes]

Arkadaşlar
Buradaki son mesajı okurmusunuz.
http://ubuntuforums.org/showthread.php?t=179846&page=2
Yazılanları uyguladım ve şu anda yavaşta olsa(hiç yazmamasından iyidir)DvD'ye yazmakta 
10 dakika oldu,2134mb yazdı işlem yüzdesi 44'te 
Bittikten sonra gelişmeleri bildireceğim.  Erkenden sevinmemek lazım aslında