ubuntu karmic geç açılma sorunu

Başlatan Tuxie, 25 Şubat 2010 - 21:28:57

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

Tuxie

25 Şubat 2010 - 21:28:57
arkadaşlar ubuntu karmic kullanıyorum son zamanlarda çekirdek güncellemelerinide yaptım fakat çok geç açılıyor yavaşlama yok açıldıktan sonra gayet hızlı ve stabil çalışıyor fakat açılması çok zaman alıyor acaba bu soruna çözüm önerisi olan  arkadaşlar yazsınlar lütfen. :o

ırmak

#1
25 Şubat 2010 - 21:33:05
Aynı sorun bende de var..

Alquimista

#2
25 Şubat 2010 - 22:00:35
E-Dergimiz Sudo'nun 16. Sayısında yer alan Basic Kit bölümümüzde bulunan önerilere bakabilirsiniz :D (Şimdi Reklamlar=)

Şaka bir yana çok fazla olmasa da giriş ekranından sonra bana da yavaşlama var gibi geliyor bir süredir. Tabi bu yavaşlamalara benim sürekli olarak yaptığım yüklemeler kaldırmaların da bir miktar payı olabilir.
If you should go skating on the thin ice of modern life, dragging behind you the silent reproach of a million tear-stained eyes, don't be surprised when a c rack in the ice appears under your feet. You slip out of your depth and out of your mind with your fear flowing out behind you as you claw the thin ice.

bytan

#3
25 Şubat 2010 - 22:09:28
Dmesg çıktılarını buraya aktarabilirseniz nerelerde duraksamalar var görebiliriz. Veya forumda anlatılan, boot sürecini grafiksel olarak görmemizi sağlayan yazılımı kullanabilirsiniz:

http://forum.ubuntu-tr.net/index.php/topic,9104.0.html
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

Tuxie

#4
25 Şubat 2010 - 22:35:54 Son düzenlenme: 25 Şubat 2010 - 23:49:34 DevilTUX
Kod Seç
[    0.483283] pci 0000:00:1c.2: setting latency timer to 64
[    0.483292]   alloc irq_desc for 19 on node -1
[    0.483294]   alloc kstat_irqs on node -1
[    0.483297] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.483302] pci 0000:00:1c.3: setting latency timer to 64
[    0.483311] pci 0000:00:1e.0: setting latency timer to 64
[    0.483316] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.483319] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.483322] pci_bus 0000:02: resource 0 io:  [0x4000-0x4fff]
[    0.483324] pci_bus 0000:02: resource 1 mem: [0x57300000-0x582fffff]
[    0.483327] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x50ffffff]
[    0.483329] pci_bus 0000:04: resource 0 io:  [0x3000-0x3fff]
[    0.483332] pci_bus 0000:04: resource 1 mem: [0x56300000-0x572fffff]
[    0.483334] pci_bus 0000:04: resource 2 pref mem [0x51000000-0x51ffffff]
[    0.483337] pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
[    0.483340] pci_bus 0000:05: resource 1 mem: [0x55200000-0x562fffff]
[    0.483342] pci_bus 0000:05: resource 2 pref mem [0x52000000-0x52ffffff]
[    0.483345] pci_bus 0000:06: resource 0 io:  [0x1000-0x1fff]
[    0.483347] pci_bus 0000:06: resource 1 mem: [0x54100000-0x551fffff]
[    0.483350] pci_bus 0000:06: resource 2 pref mem [0x53000000-0x53ffffff]
[    0.483352] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.483355] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[    0.483392] NET: Registered protocol family 2
[    0.483484] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.483787] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.484378] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.484751] TCP: Hash tables configured (established 131072 bind 65536)
[    0.484754] TCP reno registered
[    0.484890] NET: Registered protocol family 1
[    0.484973] Trying to unpack rootfs image as initramfs...
[    0.504000] Switched to high resolution mode on CPU 0
[    0.702336] Freeing initrd memory: 7951k freed
[    0.708175] cpufreq-nforce2: No nForce2 chipset.
[    0.708206] Scanning for low memory corruption every 60 seconds
[    0.708337] audit: initializing netlink socket (disabled)
[    0.708361] type=2000 audit(1267134446.708:1): initialized
[    0.717606] highmem bounce pool size: 64 pages
[    0.717611] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.718911] VFS: Disk quotas dquot_6.5.2
[    0.718964] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.719474] fuse init (API version 7.12)
[    0.719552] msgmni has been set to 1732
[    0.719737] alg: No test for stdrng (krng)
[    0.719749] io scheduler noop registered
[    0.719751] io scheduler anticipatory registered
[    0.719753] io scheduler deadline registered
[    0.719795] io scheduler cfq registered (default)
[    0.719808] pci 0000:00:02.0: Boot video device
[    0.720298]   alloc irq_desc for 24 on node -1
[    0.720301]   alloc kstat_irqs on node -1
[    0.720314] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.720326] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.720495]   alloc irq_desc for 25 on node -1
[    0.720497]   alloc kstat_irqs on node -1
[    0.720506] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.720518] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.720679]   alloc irq_desc for 26 on node -1
[    0.720681]   alloc kstat_irqs on node -1
[    0.720691] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.720703] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.720876]   alloc irq_desc for 27 on node -1
[    0.720878]   alloc kstat_irqs on node -1
[    0.720887] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.720899] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.721008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.721025] Firmware did not grant requested _OSC control
[    0.721046] Firmware did not grant requested _OSC control
[    0.721060] Firmware did not grant requested _OSC control
[    0.721074] Firmware did not grant requested _OSC control
[    0.721101] Firmware did not grant requested _OSC control
[    0.721115] Firmware did not grant requested _OSC control
[    0.721128] Firmware did not grant requested _OSC control
[    0.721142] Firmware did not grant requested _OSC control
[    0.721157] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.726916] ACPI: AC Adapter [AC] (on-line)
[    0.726986] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.726990] ACPI: Power Button [PWRF]
[    0.727042] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0C:00/input/input1
[    0.727045] ACPI: Power Button [PWRB]
[    0.727085] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0D:00/input/input2
[    0.727133] ACPI: Lid Switch [LID0]
[    0.727178] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0E:00/input/input3
[    0.727181] ACPI: Sleep Button [SLPB]
[    0.728232] Monitor-Mwait will be used to enter C-1 state
[    0.728275] Monitor-Mwait will be used to enter C-2 state
[    0.728294] Monitor-Mwait will be used to enter C-3 state
[    0.728302] Marking TSC unstable due to TSC halts in idle
[    0.728324] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.728350] processor LNXCPU:00: registered as cooling_device0
[    0.728353] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.845694] thermal LNXTHERM:01: registered as thermal_zone0
[    0.845704] ACPI: Thermal Zone [TZ01] (45 C)
[    0.845751] isapnp: Scanning for PnP cards...
[    1.200181] isapnp: No Plug & Play device found
[    2.336102] ACPI: Battery Slot [BAT0] (battery present)
[    2.336244] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.337453] brd: module loaded
[    2.337868] loop: module loaded
[    2.337940] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    2.338013] ahci 0000:00:1f.2: version 3.0
[    2.338029] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.338067]   alloc irq_desc for 28 on node -1
[    2.338069]   alloc kstat_irqs on node -1
[    2.338083] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    2.338167] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    2.338171] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
[    2.338177] ahci 0000:00:1f.2: setting latency timer to 64
[    2.352082] scsi0 : ahci
[    2.352187] scsi1 : ahci
[    2.352237] scsi2 : ahci
[    2.352363] ata1: SATA max UDMA/133 abar m2048@0x58304000 port 0x58304100 irq 28
[    2.352368] ata2: SATA max UDMA/133 abar m2048@0x58304000 port 0x58304180 irq 28
[    2.352371] ata3: SATA max UDMA/133 abar m2048@0x58304000 port 0x58304200 irq 28
[    2.352424] ata_piix 0000:00:1f.1: version 2.13
[    2.352437] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.352483] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.352579] scsi3 : ata_piix
[    2.352656] scsi4 : ata_piix
[    2.353260] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
[    2.353263] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
[    2.354011] Fixed MDIO Bus: probed
[    2.354049] PPP generic driver version 2.4.2
[    2.354153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.354173] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.354191] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.354195] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.354247] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.358168] ehci_hcd 0000:00:1a.7: debug port 1
[    2.358175] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.358403] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x58304c00
[    2.372018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.372091] usb usb1: configuration #1 chosen from 1 choice
[    2.372120] hub 1-0:1.0: USB hub found
[    2.372128] hub 1-0:1.0: 4 ports detected
[    2.372182]   alloc irq_desc for 23 on node -1
[    2.372185]   alloc kstat_irqs on node -1
[    2.372191] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.372203] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.372207] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.372237] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.376146] ehci_hcd 0000:00:1d.7: debug port 1
[    2.376153] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.376166] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x58304800
[    2.392018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.392088] usb usb2: configuration #1 chosen from 1 choice
[    2.392113] hub 2-0:1.0: USB hub found
[    2.392120] hub 2-0:1.0: 6 ports detected
[    2.392175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.392189] uhci_hcd: USB Universal Host Controller Interface driver
[    2.392229] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.392238] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.392242] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.392272] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.392310] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
[    2.392390] usb usb3: configuration #1 chosen from 1 choice
[    2.392415] hub 3-0:1.0: USB hub found
[    2.392424] hub 3-0:1.0: 2 ports detected
[    2.392467]   alloc irq_desc for 21 on node -1
[    2.392469]   alloc kstat_irqs on node -1
[    2.392474] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.392481] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.392485] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.392522] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.392560] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
[    2.392631] usb usb4: configuration #1 chosen from 1 choice
[    2.392655] hub 4-0:1.0: USB hub found
[    2.392662] hub 4-0:1.0: 2 ports detected
[    2.392705] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.392714] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.392718] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.392747] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.392775] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[    2.392846] usb usb5: configuration #1 chosen from 1 choice
[    2.392870] hub 5-0:1.0: USB hub found
[    2.392877] hub 5-0:1.0: 2 ports detected
[    2.392921] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.392928] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.392932] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.392959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.392999] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[    2.393075] usb usb6: configuration #1 chosen from 1 choice
[    2.393099] hub 6-0:1.0: USB hub found
[    2.393106] hub 6-0:1.0: 2 ports detected
[    2.393151] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.393158] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.393161] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.393188] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.393217] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    2.393290] usb usb7: configuration #1 chosen from 1 choice
[    2.393315] hub 7-0:1.0: USB hub found
[    2.393322] hub 7-0:1.0: 2 ports detected
[    2.393422] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    2.429833] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.429839] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.429894] mice: PS/2 mouse device common for all mice
[    2.430019] rtc_cmos 00:03: RTC can wake from S4
[    2.430051] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.430084] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.430181] device-mapper: uevent: version 1.0.3
[    2.430270] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.431962] device-mapper: multipath: version 1.1.0 loaded
[    2.431965] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.432086] EISA: Probing bus 0 at eisa.0
[    2.432093] Cannot allocate resource for EISA slot 1
[    2.432095] Cannot allocate resource for EISA slot 2
[    2.432097] Cannot allocate resource for EISA slot 3
[    2.432099] Cannot allocate resource for EISA slot 4
[    2.432101] Cannot allocate resource for EISA slot 5
[    2.432116] EISA: Detected 0 cards.
[    2.432193] cpuidle: using governor ladder
[    2.432249] cpuidle: using governor menu
[    2.432689] TCP cubic registered
[    2.432831] NET: Registered protocol family 10
[    2.433212] lo: Disabled Privacy Extensions
[    2.433477] NET: Registered protocol family 17
[    2.433495] Bluetooth: L2CAP ver 2.13
[    2.433497] Bluetooth: L2CAP socket layer initialized
[    2.433500] Bluetooth: SCO (Voice Link) ver 0.6
[    2.433501] Bluetooth: SCO socket layer initialized
[    2.433531] Bluetooth: RFCOMM TTY layer initialized
[    2.433534] Bluetooth: RFCOMM socket layer initialized
[    2.433536] Bluetooth: RFCOMM ver 1.11
[    2.433567] Using IPI No-Shortcut mode
[    2.433633] PM: Resume from disk failed.
[    2.433644] registered taskstats version 1
[    2.433750]   Magic number: 14:318:804
[    2.433846] rtc_cmos 00:03: setting system clock to 2010-02-25 21:47:29 UTC (1267134449)
[    2.433850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.433852] EDD information not available.
[    2.458355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    2.527596] ata4.00: ATAPI: PIONEER DVD-RW DVRKD08RS, 1.02, max UDMA/33
[    2.540320] ata4.00: configured for UDMA/33
[    2.540424] ata4.00: TEST_UNIT_READY failed (err_mask=0x2)
[    2.672042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.672066] ata2: SATA link down (SStatus 0 SControl 300)
[    2.672700] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    2.676037] ata3: SATA link down (SStatus 0 SControl 300)
[    2.719631] ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
[    2.719635] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.720527] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    2.720673] ata1.00: configured for UDMA/133
[    2.736146] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
[    2.736265] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.736303] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.736347] sd 0:0:0:0: [sda] Write Protect is off
[    2.736350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.736373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.736494]  sda: sda1 sda2 sda3 < sda5 > sda4
[    2.770620] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.364027] usb 7-1: new low speed USB device using uhci_hcd and address 2
[    3.531319] usb 7-1: configuration #1 chosen from 1 choice
[    7.692295] ata4.00: configured for UDMA/33
[    7.692398] ata4.00: TEST_UNIT_READY failed (err_mask=0x2)
[    7.692402] ata4.00: limiting speed to UDMA/33:PIO3
[   12.848301] ata4.00: configured for UDMA/33
[   12.861017] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW DVRKD08RS 1.02 PQ: 0 ANSI: 5
[   12.884498] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   12.884502] Uniform CD-ROM driver Revision: 3.20
[   12.884577] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   12.884627] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   12.884652] Freeing unused kernel memory: 540k freed
[   12.884938] Write protecting the kernel text: 4568k
[   12.884966] Write protecting the kernel read-only data: 1836k
[   13.675624] Linux agpgart interface v0.103
[   13.678594] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[   13.678828] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[   13.685934] tg3.c:v3.99 (April 20, 2009)
[   13.685955] tg3 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.685965] tg3 0000:05:00.0: setting latency timer to 64
[   13.692825] tg3 0000:05:00.0: PME# disabled
[   13.715889] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[   13.813996] [drm] Initialized drm 1.1.0 20060810
[   13.828831] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.828837] i915 0000:00:02.0: setting latency timer to 64
[   13.830952]   alloc irq_desc for 29 on node -1
[   13.830956]   alloc kstat_irqs on node -1
[   13.830966] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[   13.937939] usbcore: registered new interface driver hiddev
[   14.053726] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input6
[   14.053811] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.2-1/input0
[   14.053828] usbcore: registered new interface driver usbhid
[   14.053831] usbhid: v2.6:USB HID core driver
[   14.348270] [drm] TV-14: set mode NTSC 480i 0
[   14.476029] [drm] fb0: inteldrmfb frame buffer device
[   14.693270] acpi device:3d: registered as cooling_device1
[   14.693534] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/input/input7
[   14.693575] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   14.693596] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.766265] [drm] LVDS-8: set mode 1280x800 17
[   14.790512] Console: switching to colour frame buffer device 160x50
[   14.949829] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:79:6f:23
[   14.949833] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[   14.949836] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   14.949838] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   15.286056] EXT4-fs (sda5): barriers enabled
[   15.305320] kjournald2 starting: pid 368, dev sda5:8, commit interval 5 seconds
[   15.305333] EXT4-fs (sda5): delayed allocation enabled
[   15.305337] EXT4-fs: file extents enabled
[   15.307260] EXT4-fs: mballoc enabled
[   15.307275] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   15.928093] type=1505 audit(1267134462.994:2): operation="profile_load" pid=391 name=/usr/share/gdm/guest-session/Xsession
[   15.930933] type=1505 audit(1267134462.994:3): operation="profile_load" pid=392 name=/sbin/dhclient3
[   15.931720] type=1505 audit(1267134462.994:4): operation="profile_load" pid=392 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   15.932173] type=1505 audit(1267134462.998:5): operation="profile_load" pid=392 name=/usr/lib/connman/scripts/dhclient-script
[   15.981340] type=1505 audit(1267134463.046:6): operation="profile_load" pid=393 name=/usr/bin/evince
[   15.993707] type=1505 audit(1267134463.058:7): operation="profile_load" pid=393 name=/usr/bin/evince-previewer
[   16.001031] type=1505 audit(1267134463.066:8): operation="profile_load" pid=393 name=/usr/bin/evince-thumbnailer
[   16.027338] type=1505 audit(1267134463.090:9): operation="profile_load" pid=395 name=/usr/bin/virt-aa-helper
[   16.045310] type=1505 audit(1267134463.110:10): operation="profile_load" pid=396 name=/usr/lib/cups/backend/cups-pdf
[   16.046227] type=1505 audit(1267134463.110:11): operation="profile_load" pid=396 name=/usr/sbin/cupsd
[   18.670443] EXT4-fs (sda5): internal journal on sda5:8
[   19.055453] udev: starting version 147
[   21.465681] acer-wmi: Acer Laptop ACPI-WMI Extras
[   21.477189] acer-wmi: Brightness must be controlled by generic video driver
[   21.682709] cfg80211: Calling CRDA to update world regulatory domain
[   21.695015] lp: driver loaded but no devices found
[   22.068968] __ratelimit: 12 callbacks suppressed
[   22.068972] type=1505 audit(1267127269.134:16): operation="profile_replace" pid=736 name=/usr/share/gdm/guest-session/Xsession
[   22.070936] type=1505 audit(1267127269.134:17): operation="profile_replace" pid=737 name=/sbin/dhclient3
[   22.071738] type=1505 audit(1267127269.134:18): operation="profile_replace" pid=737 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   22.072198] type=1505 audit(1267127269.138:19): operation="profile_replace" pid=737 name=/usr/lib/connman/scripts/dhclient-script
[   22.077034] type=1505 audit(1267127269.142:20): operation="profile_replace" pid=738 name=/usr/bin/evince
[   22.090137] type=1505 audit(1267127269.154:21): operation="profile_replace" pid=738 name=/usr/bin/evince-previewer
[   22.097658] type=1505 audit(1267127269.162:22): operation="profile_replace" pid=738 name=/usr/bin/evince-thumbnailer
[   22.107810] type=1505 audit(1267127269.170:23): operation="profile_replace" pid=740 name=/usr/bin/virt-aa-helper
[   22.109924] type=1505 audit(1267127269.174:24): operation="profile_replace" pid=741 name=/usr/lib/cups/backend/cups-pdf
[   22.110842] type=1505 audit(1267127269.174:25): operation="profile_replace" pid=741 name=/usr/sbin/cupsd
[   22.264559] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.630931] cfg80211: World regulatory domain updated:
[   22.630937] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.630940] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.630943] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.630945] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.630948] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.630950] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.763150] ath5k 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   22.763168] ath5k 0000:06:00.0: setting latency timer to 64
[   22.763231] ath5k 0000:06:00.0: registered as 'phy0'
[   22.863636] ath: EEPROM regdomain: 0x65
[   22.863640] ath: EEPROM indicates we should expect a direct regpair map
[   22.863644] ath: Country alpha2 being used: 00
[   22.863645] ath: Regpair used: 0x65
[   22.886282] nf_conntrack version 0.5.0 (16231 buckets, 64924 max)
[   22.886482] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   22.886484] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   22.886487] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   22.938558] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[   22.981424] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[   23.330158] phy0: Selected rate control algorithm 'minstrel'
[   23.330850] Registered led device: ath5k-phy0::rx
[   23.330865] Registered led device: ath5k-phy0::tx
[   23.330869] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   23.479489] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.110601]   alloc irq_desc for 22 on node -1
[   24.110605]   alloc kstat_irqs on node -1
[   24.110613] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   24.110658] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   24.330095] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   28.734384] __ratelimit: 12 callbacks suppressed
[   28.734387] type=1503 audit(1267127275.800:30): operation="open" pid=1274 parent=1273 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   29.828213] type=1503 audit(1267127276.894:31): operation="open" pid=1338 parent=1337 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   30.455315] type=1503 audit(1267127277.518:32): operation="open" pid=1483 parent=1351 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   31.090637] type=1503 audit(1267127278.154:33): operation="open" pid=1496 parent=1495 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   32.106992] type=1503 audit(1267127279.170:34): operation="open" pid=1510 parent=1509 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   33.123526] type=1503 audit(1267127280.186:35): operation="open" pid=1521 parent=1520 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   34.140851] type=1503 audit(1267127281.206:36): operation="open" pid=1531 parent=1530 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.157179] type=1503 audit(1267127282.222:37): operation="open" pid=1545 parent=1544 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.824624] [drm] TV-14: set mode NTSC 480i 0
[   35.972248] [drm] TV-14: set mode NTSC 480i 0
[   36.352218] [drm] TV-14: set mode NTSC 480i 0
[   36.495191] [drm] TV-14: set mode NTSC 480i 0
[   37.846668] type=1503 audit(1267127284.910:38): operation="open" pid=1562 parent=1561 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   37.890487] type=1503 audit(1267127284.954:39): operation="open" pid=1573 parent=1572 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   51.280437] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   53.341813] [drm] TV-14: set mode NTSC 480i 0
[   53.485397] [drm] TV-14: set mode NTSC 480i 0
[   53.863555] [drm] TV-14: set mode NTSC 480i 0
[   54.013523] [drm] TV-14: set mode NTSC 480i 0
[   54.128256] ppdev: user-space parallel port driver
[   54.282729] [drm] TV-14: set mode NTSC 480i 0
[   54.441596] [drm] TV-14: set mode NTSC 480i 0
[   54.924296] Bridge firewalling registered
[   55.253598] virbr0: starting userspace STP failed, starting kernel STP
[   57.318626] tg3 0000:05:00.0: PME# disabled
[   57.318751]   alloc irq_desc for 30 on node -1
[   57.318753]   alloc kstat_irqs on node -1
[   57.318772] tg3 0000:05:00.0: irq 30 for MSI/MSI-X
[   57.398268] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   57.717673] lo: Disabled Privacy Extensions
[   58.339009] [drm] TV-14: set mode NTSC 480i 0
[   58.482587] [drm] TV-14: set mode NTSC 480i 0
[   61.109404] tg3 0000:05:00.0: PME# disabled
[   61.124347] tg3 0000:05:00.0: irq 30 for MSI/MSI-X
[   61.177313] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   62.984332] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.616096] wlan0: authenticate with AP 00:1e:40:65:9a:4b
[   66.628011] wlan0: authenticated
[   66.628014] wlan0: associate with AP 00:1e:40:65:9a:4b
[   66.632198] wlan0: RX AssocResp from 00:1e:40:65:9a:4b (capab=0x411 status=0 aid=1)
[   66.632201] wlan0: associated
[   66.632861] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   77.276024] wlan0: no IPv6 routers present
[ 1855.116038] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 1855.298154] usb 6-1: configuration #1 chosen from 1 choice
[ 1855.352614] Initializing USB Mass Storage driver...
[ 1855.353617] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1855.353787] usbcore: registered new interface driver usb-storage
[ 1855.353791] USB Mass Storage support registered.
[ 1855.354410] usb-storage: device found at 2
[ 1855.354413] usb-storage: waiting for device to settle before scanning
[ 1860.353999] usb-storage: device scan complete
[ 1860.356990] scsi 5:0:0:0: Direct-Access     General  Flash Disk Drive 2.05 PQ: 0 ANSI: 2 CCS
[ 1860.357379] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1860.362993] sd 5:0:0:0: [sdb] 1989632 512-byte logical blocks: (1.01 GB/971 MiB)
[ 1860.365972] sd 5:0:0:0: [sdb] Write Protect is off
[ 1860.365975] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1860.365978] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1860.377960] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1860.377966]  sdb:
[ 1860.397963] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1860.397970] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 2297.059521] VFS: busy inodes on changed media or resized disk sdb
[ 2297.060268] usb 6-1: USB disconnect, address 2
[ 2297.063857] FAT: bread failed in fat_clusters_flush
[ 2297.063933] FAT: bread failed in fat_clusters_flush
[ 2297.063942] FAT: bread failed in fat_clusters_flush
[ 2297.091790] FAT: bread failed in fat_clusters_flush
[ 2297.110941] FAT: bread failed in fat_clusters_flush
[ 2297.110985] FAT: bread failed in fat_clusters_flush
çıktı bu şekilde oldu.

NOT: Çıktı ve belgeleri için lütfen kod etiketi kullanınız. Bakınız.

ırmak

#5
25 Şubat 2010 - 23:46:22
Kod Seç
[    0.228315] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.228318] system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved
[    0.228321] system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.228324] system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.228326] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.228330] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.228332] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.228335] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.262980] AppArmor: AppArmor Filesystem Enabled
[    0.263047] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.263050] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
[    0.263054] pci 0000:00:01.0:   MEM window: 0xcfe00000-0xcfefffff
[    0.263058] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.263063] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.263066] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    0.263073] pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
[    0.263078] pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[    0.263086] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.263089] pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
[    0.263095] pci 0000:00:1c.2:   MEM window: 0xf8000000-0xf9ffffff
[    0.263101] pci 0000:00:1c.2:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[    0.263110] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[    0.263113] pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
[    0.263119] pci 0000:00:1c.3:   MEM window: 0xfa000000-0xfbffffff
[    0.263124] pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[    0.263132] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[    0.263134] pci 0000:00:1e.0:   IO window: disabled
[    0.263140] pci 0000:00:1e.0:   MEM window: disabled
[    0.263145] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.263155]   alloc irq_desc for 16 on node -1
[    0.263157]   alloc kstat_irqs on node -1
[    0.263161] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.263165] pci 0000:00:01.0: setting latency timer to 64
[    0.263173]   alloc irq_desc for 17 on node -1
[    0.263174]   alloc kstat_irqs on node -1
[    0.263178] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.263183] pci 0000:00:1c.0: setting latency timer to 64
[    0.263191]   alloc irq_desc for 18 on node -1
[    0.263192]   alloc kstat_irqs on node -1
[    0.263196] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.263201] pci 0000:00:1c.2: setting latency timer to 64
[    0.263209]   alloc irq_desc for 19 on node -1
[    0.263211]   alloc kstat_irqs on node -1
[    0.263214] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.263219] pci 0000:00:1c.3: setting latency timer to 64
[    0.263227] pci 0000:00:1e.0: setting latency timer to 64
[    0.263231] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.263233] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.263236] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.263238] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
[    0.263241] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.263244] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.263246] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[    0.263249] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[    0.263251] pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
[    0.263254] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[    0.263256] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[    0.263259] pci_bus 0000:06: resource 0 io:  [0x5000-0x5fff]
[    0.263261] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
[    0.263264] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
[    0.263266] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    0.263269] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[    0.263300] NET: Registered protocol family 2
[    0.263384] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.263657] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.264012] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.264193] TCP: Hash tables configured (established 131072 bind 65536)
[    0.264196] TCP reno registered
[    0.264258] NET: Registered protocol family 1
[    0.264308] Trying to unpack rootfs image as initramfs...
[    0.456618] Freeing initrd memory: 7708k freed
[    0.459628] Simple Boot Flag at 0x37 set to 0x1
[    0.459800] cpufreq-nforce2: No nForce2 chipset.
[    0.459828] Scanning for low memory corruption every 60 seconds
[    0.459932] audit: initializing netlink socket (disabled)
[    0.459949] type=2000 audit(1267132214.456:1): initialized
[    0.468652] highmem bounce pool size: 64 pages
[    0.468657] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.470077] VFS: Disk quotas dquot_6.5.2
[    0.470135] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.470666] fuse init (API version 7.12)
[    0.470747] msgmni has been set to 1680
[    0.470939] alg: No test for stdrng (krng)
[    0.470953] io scheduler noop registered
[    0.470955] io scheduler anticipatory registered
[    0.470957] io scheduler deadline registered
[    0.470998] io scheduler cfq registered (default)
[    0.471147] pci 0000:01:00.0: Boot video device
[    0.471262]   alloc irq_desc for 24 on node -1
[    0.471264]   alloc kstat_irqs on node -1
[    0.471272] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.471279] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.471405]   alloc irq_desc for 25 on node -1
[    0.471407]   alloc kstat_irqs on node -1
[    0.471415] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.471426] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.471582]   alloc irq_desc for 26 on node -1
[    0.471584]   alloc kstat_irqs on node -1
[    0.471593] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.471603] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.471755]   alloc irq_desc for 27 on node -1
[    0.471757]   alloc kstat_irqs on node -1
[    0.471766] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.471777] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.471879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.472035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.472421] ACPI: AC Adapter [ADP1] (on-line)
[    0.472482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.472486] ACPI: Power Button [PWRF]
[    0.472545] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.472585] ACPI: Lid Switch [LID0]
[    0.472629] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.472636] ACPI: Power Button [PWRB]
[    0.472676] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.472679] ACPI: Sleep Button [SLPB]
[    0.472792] fan PNP0C0B:00: registered as cooling_device0
[    0.472798] ACPI: Fan [FAN0] (off)
[    0.472882] fan PNP0C0B:01: registered as cooling_device1
[    0.472888] ACPI: Fan [FAN1] (off)
[    0.473664] ACPI: SSDT bdf1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.474379] ACPI: SSDT bdf19020 00C78 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.476599] Monitor-Mwait will be used to enter C-1 state
[    0.476621] Monitor-Mwait will be used to enter C-2 state
[    0.476629] Marking TSC unstable due to TSC halts in idle
[    0.476653] Switched to high resolution mode on CPU 0
[    0.476662] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    0.476684] processor LNXCPU:00: registered as cooling_device2
[    0.476688] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.477130] ACPI: SSDT bdf1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.477521] ACPI: SSDT bdf1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.477639] Switched to high resolution mode on CPU 1
[    0.478528] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    0.478546] processor LNXCPU:01: registered as cooling_device3
[    0.478549] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.481666] thermal LNXTHERM:01: registered as thermal_zone0
[    0.481674] ACPI: Thermal Zone [TZ00] (32 C)
[    0.482571] thermal LNXTHERM:02: registered as thermal_zone1
[    0.482579] ACPI: Thermal Zone [TZ01] (32 C)
[    0.482635] isapnp: Scanning for PnP cards...
[    0.492306] ACPI: Battery Slot [BAT1] (battery absent)
[    0.836479] isapnp: No Plug & Play device found
[    0.837627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.838890] brd: module loaded
[    0.839314] loop: module loaded
[    0.839383] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.839454] ahci 0000:00:1f.2: version 3.0
[    0.839467] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.839499]   alloc irq_desc for 28 on node -1
[    0.839501]   alloc kstat_irqs on node -1
[    0.839511] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    0.839562] ahci: SSS flag set, parallel bus scan disabled
[    0.839599] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.839603] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[    0.839608] ahci 0000:00:1f.2: setting latency timer to 64
[    0.861057] scsi0 : ahci
[    0.861134] scsi1 : ahci
[    0.861187] scsi2 : ahci
[    0.861237] scsi3 : ahci
[    0.861288] scsi4 : ahci
[    0.861341] scsi5 : ahci
[    0.861383] ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 28
[    0.861387] ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 28
[    0.861389] ata3: DUMMY
[    0.861391] ata4: DUMMY
[    0.861393] ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 28
[    0.861397] ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 28
[    0.862271] Fixed MDIO Bus: probed
[    0.862305] PPP generic driver version 2.4.2
[    0.862383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.862401] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.862411] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.862415] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.862461] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.866359] ehci_hcd 0000:00:1a.7: debug port 1
[    0.866366] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.866379] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800
[    0.881013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.881088] usb usb1: configuration #1 chosen from 1 choice
[    0.881115] hub 1-0:1.0: USB hub found
[    0.881122] hub 1-0:1.0: 6 ports detected
[    0.881185]   alloc irq_desc for 23 on node -1
[    0.881186]   alloc kstat_irqs on node -1
[    0.881191] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.881200] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.881203] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.881232] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.885128] ehci_hcd 0000:00:1d.7: debug port 1
[    0.885135] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.885147] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00
[    0.900017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.900074] usb usb2: configuration #1 chosen from 1 choice
[    0.900101] hub 2-0:1.0: USB hub found
[    0.900107] hub 2-0:1.0: 6 ports detected
[    0.900164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.900179] uhci_hcd: USB Universal Host Controller Interface driver
[    0.900198] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.900204] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.900207] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.900235] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.900272] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.900347] usb usb3: configuration #1 chosen from 1 choice
[    0.900372] hub 3-0:1.0: USB hub found
[    0.900378] hub 3-0:1.0: 2 ports detected
[    0.900422]   alloc irq_desc for 21 on node -1
[    0.900424]   alloc kstat_irqs on node -1
[    0.900428] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.900434] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.900437] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.900465] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.900498] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.900572] usb usb4: configuration #1 chosen from 1 choice
[    0.900597] hub 4-0:1.0: USB hub found
[    0.900603] hub 4-0:1.0: 2 ports detected
[    0.900648] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.900655] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.900658] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.900690] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.900716] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    0.900791] usb usb5: configuration #1 chosen from 1 choice
[    0.900816] hub 5-0:1.0: USB hub found
[    0.900822] hub 5-0:1.0: 2 ports detected
[    0.900868] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.900875] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.900878] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.900906] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.900931] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.901015] usb usb6: configuration #1 chosen from 1 choice
[    0.901040] hub 6-0:1.0: USB hub found
[    0.901046] hub 6-0:1.0: 2 ports detected
[    0.901093] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.901099] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.901102] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.901133] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.901160] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.901232] usb usb7: configuration #1 chosen from 1 choice
[    0.901257] hub 7-0:1.0: USB hub found
[    0.901263] hub 7-0:1.0: 2 ports detected
[    0.901309] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.901316] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.901320] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.901347] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.901381] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.901457] usb usb8: configuration #1 chosen from 1 choice
[    0.901481] hub 8-0:1.0: USB hub found
[    0.901487] hub 8-0:1.0: 2 ports detected
[    0.901581] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.904101] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.905057] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.905063] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.905065] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.905068] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.905071] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.905121] mice: PS/2 mouse device common for all mice
[    0.905277] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.905307] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.905397] device-mapper: uevent: version 1.0.3
[    0.905506] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.905591] device-mapper: multipath: version 1.1.0 loaded
[    0.905594] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.905706] EISA: Probing bus 0 at eisa.0
[    0.905712] Cannot allocate resource for EISA slot 1
[    0.905714] Cannot allocate resource for EISA slot 2
[    0.905716] Cannot allocate resource for EISA slot 3
[    0.905718] Cannot allocate resource for EISA slot 4
[    0.905720] Cannot allocate resource for EISA slot 5
[    0.905733] EISA: Detected 0 cards.
[    0.905881] cpuidle: using governor ladder
[    0.905969] cpuidle: using governor menu
[    0.906432] TCP cubic registered
[    0.906579] NET: Registered protocol family 10
[    0.907008] lo: Disabled Privacy Extensions
[    0.907332] NET: Registered protocol family 17
[    0.907347] Bluetooth: L2CAP ver 2.13
[    0.907349] Bluetooth: L2CAP socket layer initialized
[    0.907352] Bluetooth: SCO (Voice Link) ver 0.6
[    0.907353] Bluetooth: SCO socket layer initialized
[    0.907387] Bluetooth: RFCOMM TTY layer initialized
[    0.907390] Bluetooth: RFCOMM socket layer initialized
[    0.907392] Bluetooth: RFCOMM ver 1.11
[    0.907970] Using IPI No-Shortcut mode
[    0.908043] PM: Resume from disk failed.
[    0.908054] registered taskstats version 1
[    0.908151]   Magic number: 14:697:197
[    0.908179] acpi PNP0100:00: hash matches
[    0.908220] rtc_cmos 00:07: setting system clock to 2010-02-25 21:10:15 UTC (1267132215)
[    0.908223] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.908224] EDD information not available.
[    0.928752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.188883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.189729] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC66G, max UDMA/133
[    1.189733] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.190778] ata1.00: configured for UDMA/133
[    1.204158] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[    1.204267] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.204303] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.204347] sd 0:0:0:0: [sda] Write Protect is off
[    1.204350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.204373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.204488]  sda: sda1 sda2 sda3 sda4 <
[    1.248042] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    1.259168]  sda5 sda6 >
[    1.270844] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.401115] usb 1-3: configuration #1 chosen from 1 choice
[    1.640044] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.813371] usb 3-1: configuration #1 chosen from 1 choice
[    1.928048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.929937] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633B, SC01, max UDMA/100, ATAPI AN
[    1.929956] ata2.00: applying bridge limits
[    1.932447] ata2.00: configured for UDMA/100
[    1.949934] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633B  SC01 PQ: 0 ANSI: 5
[    1.956304] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.956307] Uniform CD-ROM driver Revision: 3.20
[    1.956389] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.956434] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.276063] ata5: SATA link down (SStatus 0 SControl 300)
[    2.612046] ata6: SATA link down (SStatus 0 SControl 300)
[    2.628054] Freeing unused kernel memory: 540k freed
[    2.628346] Write protecting the kernel text: 4568k
[    2.628392] Write protecting the kernel read-only data: 1836k
[    2.736953] Linux agpgart interface v0.103
[    2.762619] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    2.763563] acpi device:04: registered as cooling_device4
[    2.763695] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[    2.763732] ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
[    2.786498] sky2 driver version 1.23
[    2.786603] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.786653] sky2 0000:06:00.0: setting latency timer to 64
[    2.786737] sky2 0000:06:00.0: Yukon-2 (chip 0xba) chip revision 0
[    2.787254]   alloc irq_desc for 29 on node -1
[    2.787256]   alloc kstat_irqs on node -1
[    2.787329] sky2 0000:06:00.0: irq 29 for MSI/MSI-X
[    2.788239] sky2 eth0: addr 00:24:54:0a:06:6c
[    2.823410] usbcore: registered new interface driver hiddev
[    2.823459] usbcore: registered new interface driver usbhid
[    2.823462] usbhid: v2.6:USB HID core driver
[    2.842526] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input7
[    2.842604] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.0-1/input0
[    3.731610] xor: automatically using best checksumming function: pIII_sse
[    3.749007]    pIII_sse  :  7416.000 MB/sec
[    3.749009] xor: using function: pIII_sse (7416.000 MB/sec)
[    3.751275] device-mapper: dm-raid45: initialized v0.2594b
[    4.102138] PM: Starting manual resume from disk
[    4.102142] PM: Resume from partition 8:6
[    4.102144] PM: Checking hibernation image.
[    4.102247] PM: Resume from disk failed.
[    4.114440] EXT4-fs (sda5): barriers enabled
[    4.132471] kjournald2 starting: pid 431, dev sda5:8, commit interval 5 seconds
[    4.132487] EXT4-fs (sda5): delayed allocation enabled
[    4.132491] EXT4-fs: file extents enabled
[    4.133058] EXT4-fs: mballoc enabled
[    4.133070] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    4.743056] type=1505 audit(1267132219.334:2): operation="profile_load" pid=454 name=/usr/share/gdm/guest-session/Xsession
[    4.745180] type=1505 audit(1267132219.335:3): operation="profile_load" pid=455 name=/sbin/dhclient3
[    4.745932] type=1505 audit(1267132219.335:4): operation="profile_load" pid=455 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.746323] type=1505 audit(1267132219.335:5): operation="profile_load" pid=455 name=/usr/lib/connman/scripts/dhclient-script
[    4.800198] type=1505 audit(1267132219.391:6): operation="profile_load" pid=456 name=/usr/bin/evince
[    4.811769] type=1505 audit(1267132219.399:7): operation="profile_load" pid=456 name=/usr/bin/evince-previewer
[    4.818648] type=1505 audit(1267132219.407:8): operation="profile_load" pid=456 name=/usr/bin/evince-thumbnailer
[    4.853423] type=1505 audit(1267132219.443:9): operation="profile_load" pid=458 name=/usr/lib/cups/backend/cups-pdf
[   13.375999] udev: starting version 147
[   13.398657] Adding 1951856k swap on /dev/sda6.  Priority:-1 extents:1 across:1951856k
[   13.404270] lp: driver loaded but no devices found
[   13.445328] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   13.445332] Disabling lock debugging due to kernel taint
[   13.487896] EXT4-fs (sda5): internal journal on sda5:8
[   13.545691] [fglrx] Maximum main memory to use for locked dma buffers: 2844 MBytes.
[   13.546037] [fglrx]   vendor: 1002 device: 9480 count: 1
[   13.546508] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[   13.546525] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.546531] pci 0000:01:00.0: setting latency timer to 64
[   13.546691] [fglrx] Kernel PAT support is enabled
[   13.546714] [fglrx] module loaded - fglrx 8.69.4 [Dec 11 2009] with 1 minors
[   13.584631] Linux video capture interface: v2.00
[   13.587497] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c335)
[   13.621207]   alloc irq_desc for 22 on node -1
[   13.621210]   alloc kstat_irqs on node -1
[   13.621216] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.621247] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.628580] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.628780] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
[   13.628831] usbcore: registered new interface driver uvcvideo
[   13.628834] USB Video Class driver (v0.1.0)
[   13.637853] cfg80211: Calling CRDA to update world regulatory domain
[   13.656506] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.656519] ath5k 0000:02:00.0: setting latency timer to 64
[   13.656549] ath5k 0000:02:00.0: registered as 'phy0'
[   13.754433] ath: EEPROM regdomain: 0x68
[   13.754436] ath: EEPROM indicates we should expect a direct regpair map
[   13.754439] ath: Country alpha2 being used: 00
[   13.754441] ath: Regpair used: 0x68
[   13.766670] phy0: Selected rate control algorithm 'minstrel'
[   13.767347] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   13.774183] cfg80211: World regulatory domain updated:
[   13.774186] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.774189] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.774192] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.774194] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.774196] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.774199] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.820948] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[   13.821794] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   13.824158] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.824189] HDA Intel 0000:01:00.1: setting latency timer to 64
[   14.100026] __ratelimit: 6 callbacks suppressed
[   14.100029] type=1505 audit(1267125028.691:12): operation="profile_replace" pid=1013 name=/usr/share/gdm/guest-session/Xsession
[   14.101692] type=1505 audit(1267125028.691:13): operation="profile_replace" pid=1014 name=/sbin/dhclient3
[   14.102414] type=1505 audit(1267125028.691:14): operation="profile_replace" pid=1014 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   14.102824] type=1505 audit(1267125028.691:15): operation="profile_replace" pid=1014 name=/usr/lib/connman/scripts/dhclient-script
[   14.106409] type=1505 audit(1267125028.695:16): operation="profile_replace" pid=1015 name=/usr/bin/evince
[   14.118279] type=1505 audit(1267125028.707:17): operation="profile_replace" pid=1015 name=/usr/bin/evince-previewer
[   14.125180] type=1505 audit(1267125028.715:18): operation="profile_replace" pid=1015 name=/usr/bin/evince-thumbnailer
[   14.134489] type=1505 audit(1267125028.723:19): operation="profile_replace" pid=1017 name=/usr/lib/cups/backend/cups-pdf
[   14.135332] type=1505 audit(1267125028.723:20): operation="profile_replace" pid=1017 name=/usr/sbin/cupsd
[   14.137702] type=1505 audit(1267125028.727:21): operation="profile_replace" pid=1018 name=/usr/sbin/tcpdump
[   14.282357] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
[   14.316619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[   14.473340] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.492750] sky2 eth0: enabling interface
[   14.492971] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.372228] ppdev: user-space parallel port driver
[   17.045703]   alloc irq_desc for 30 on node -1
[   17.045706]   alloc kstat_irqs on node -1
[   17.045721] fglrx_pci 0000:01:00.0: irq 30 for MSI/MSI-X
[   17.047495] [fglrx] Firegl kernel thread PID: 1679
[   17.254841] [fglrx] Gart USWC size:933 M.
[   17.254845] [fglrx] Gart cacheable size:369 M.
[   17.254851] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   17.254853] [fglrx] Reserved FB block: Unshared offset:fd13000, size:2ed000
[   17.254856] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[   21.144016] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   41.664240] wlan0: authenticate with AP 00:22:93:ca:6e:b8
[   41.665593] wlan0: authenticated
[   41.665597] wlan0: associate with AP 00:22:93:ca:6e:b8
[   41.667718] wlan0: RX AssocResp from 00:22:93:ca:6e:b8 (capab=0x411 status=0 aid=2)
[   41.667722] wlan0: associated
[   41.669032] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.645014] wlan0: no IPv6 routers present

erginemr

#6
26 Şubat 2010 - 00:22:54
Geç açılmasından kastınız Grub yazısından sonra işletim sistemi seçenek menüsünün çok geç gelmesi mi, yoksa daha sonraki Ubuntu simgesinin göründüğü yükleme ekranındaki beklemenin uzun sürmesi mi?

ırmak

#7
26 Şubat 2010 - 09:38:42
Alıntı yapılan: erginemr - 26 Şubat 2010 - 00:22:54
Geç açılmasından kastınız Grub yazısından sonra işletim sistemi seçenek menüsünün çok geç gelmesi mi, yoksa daha sonraki Ubuntu simgesinin göründüğü yükleme ekranındaki beklemenin uzun sürmesi mi?

Benim için 2.si geçerli. Bir de çok geç açılıyor demiyorum. Yine 1 dakikanın altında olmalı süre ama bundan biraz daha hızlıydı önceden, eminim.

sema

#8
26 Şubat 2010 - 09:41:25
Aynısının tıpkısı bende de var, Ubuntu simgesi göründükten sonra eskisinden daha uzun sürede açılıyor yalnız bu sürenin 1 dakikadan fazla olduğunu söyleyebilirim.
susema

ırmak

#9
26 Şubat 2010 - 09:43:38
Alıntı yapılan: semagkyz - 26 Şubat 2010 - 09:41:25
Aynısının tıpkısı bende de var, Ubuntu simgesi göründükten sonra eskisinden daha uzun sürede açılıyor yalnız bu sürenin 1 dakikadan fazla olduğunu söyleyebilirim.

Sizin çıktınız ne durumda??

sema

#10
26 Şubat 2010 - 10:05:57
Alıntı yapılan: ırmak - 26 Şubat 2010 - 09:43:38
Sizin çıktınız ne durumda??

Yahu bende çok ilginç bir çıktı var, hiç sizinkilere benzemiyor :P Neyse kaçtım ben, konu çözülmezse veririm sonra. Muhtemelen herkeste aynı sorun mevcuttur, bu da bizden kaynaklanmıyordur.
susema

ırmak

#11
26 Şubat 2010 - 10:10:25
Alıntı yapılan: semagkyz - 26 Şubat 2010 - 10:05:57
Alıntı yapılan: ırmak - 26 Şubat 2010 - 09:43:38
Sizin çıktınız ne durumda??

Yahu bende çok ilginç bir çıktı var, hiç sizinkilere benzemiyor :P Neyse kaçtım ben, konu çözülmezse veririm sonra. Muhtemelen herkeste aynı sorun mevcuttur, bu da bizden kaynaklanmıyordur.

Nöbetçiler!! Windows kullanan biri var aramızda, yakalayın :D :D :D

heartsmagic

#12
26 Şubat 2010 - 10:20:29
Kernel satırlarından splash kısmını çıkartıp nerede beklediğini görebiliyor musunuz?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

Tuxie

#13
26 Şubat 2010 - 10:30:46
arkadaşlar geç açılma sorunu grubta değil ubuntu simgesi gelirken oluyor ve çok bekliyor 1 dakikanın üzerinde bir yerde okumuştum kernel derleyerek gereksiz modülleri kaldırarak sistemi hızlandırabileceğimiz söyleniyordu.

ırmak

#14
26 Şubat 2010 - 10:34:13
Alıntı yapılan: heartsmagic - 26 Şubat 2010 - 10:20:29
Kernel satırlarından splash kısmını çıkartıp nerede beklediğini görebiliyor musunuz?

Hayır çünkü dediğinizi nasıl yapacağım hakkında bir fikrim yok.
Biraz açar mısınız rica etsem..

garafatma

#15
26 Şubat 2010 - 10:45:15
Alıntı yapılan: ırmak - 26 Şubat 2010 - 10:34:13
Alıntı yapılan: heartsmagic - 26 Şubat 2010 - 10:20:29
Kernel satırlarından splash kısmını çıkartıp nerede beklediğini görebiliyor musunuz?

Hayır çünkü dediğinizi nasıl yapacağım hakkında bir fikrim yok.
Biraz açar mısınız rica etsem..

GRUB ekranında ubuntuyu açtığınız seçenğin üzerine gelip "e" tuşuna bastıktan sonra düzenleme ekranı gelecek. Orada satır sonundaki splash'i sildikten sonra "b" ile başlatmanız gerekiyor.
Bira, Tanrı'nın bizi sevdiğinin ve eğlenmemizi istediğinin kanıtıdır.

>-- Askıdaki Çeviri --< Ubuntu Türkçe Çevirilerine Sizde Destek Olun
Elveda metal müziğin tanrısı... \m/ Ronnie James DIO: 1942 - 2010

ırmak

#16
26 Şubat 2010 - 11:01:44
Alıntı yapılan: keiser_soze - 26 Şubat 2010 - 10:45:15
Alıntı yapılan: ırmak - 26 Şubat 2010 - 10:34:13
Alıntı yapılan: heartsmagic - 26 Şubat 2010 - 10:20:29
Kernel satırlarından splash kısmını çıkartıp nerede beklediğini görebiliyor musunuz?

Hayır çünkü dediğinizi nasıl yapacağım hakkında bir fikrim yok.
Biraz açar mısınız rica etsem..

GRUB ekranında ubuntuyu açtığınız seçenğin üzerine gelip "e" tuşuna bastıktan sonra düzenleme ekranı gelecek. Orada satır sonundaki splash'i sildikten sonra "b" ile başlatmanız gerekiyor.


Teşekkür ederim yardımınız için, grub ekranına girdim. "e" tuşuna bastım, düzenleme ekranı geldi. Satır sonundaki splash'ı sildim. "b" tuşuna bastım ve ekrana b yazıldı. Başlamadı. Boot için ctrl+x yazıyordu altta, yaptım, açıldı. İyi ki yazıyordu yoksa muhtemelen orada kalmıştım ben.

Bu da yeni çıktı..
Kod Seç
[    0.228302] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[    0.228309] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.228312] system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved
[    0.228315] system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.228318] system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.228321] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.228324] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.228327] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.228330] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.262981] AppArmor: AppArmor Filesystem Enabled
[    0.263048] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.263051] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
[    0.263055] pci 0000:00:01.0:   MEM window: 0xcfe00000-0xcfefffff
[    0.263059] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.263064] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.263067] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    0.263073] pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
[    0.263078] pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[    0.263086] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.263090] pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
[    0.263096] pci 0000:00:1c.2:   MEM window: 0xf8000000-0xf9ffffff
[    0.263101] pci 0000:00:1c.2:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[    0.263110] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[    0.263113] pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
[    0.263120] pci 0000:00:1c.3:   MEM window: 0xfa000000-0xfbffffff
[    0.263125] pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[    0.263133] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[    0.263135] pci 0000:00:1e.0:   IO window: disabled
[    0.263141] pci 0000:00:1e.0:   MEM window: disabled
[    0.263146] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.263156]   alloc irq_desc for 16 on node -1
[    0.263158]   alloc kstat_irqs on node -1
[    0.263162] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.263166] pci 0000:00:01.0: setting latency timer to 64
[    0.263174]   alloc irq_desc for 17 on node -1
[    0.263176]   alloc kstat_irqs on node -1
[    0.263179] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.263184] pci 0000:00:1c.0: setting latency timer to 64
[    0.263192]   alloc irq_desc for 18 on node -1
[    0.263194]   alloc kstat_irqs on node -1
[    0.263197] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.263202] pci 0000:00:1c.2: setting latency timer to 64
[    0.263210]   alloc irq_desc for 19 on node -1
[    0.263212]   alloc kstat_irqs on node -1
[    0.263215] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.263220] pci 0000:00:1c.3: setting latency timer to 64
[    0.263228] pci 0000:00:1e.0: setting latency timer to 64
[    0.263232] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.263235] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.263237] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.263240] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
[    0.263242] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.263245] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.263248] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[    0.263250] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[    0.263253] pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
[    0.263255] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[    0.263258] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[    0.263260] pci_bus 0000:06: resource 0 io:  [0x5000-0x5fff]
[    0.263263] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
[    0.263265] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
[    0.263268] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    0.263270] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[    0.263301] NET: Registered protocol family 2
[    0.263385] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.263658] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.264007] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.264185] TCP: Hash tables configured (established 131072 bind 65536)
[    0.264187] TCP reno registered
[    0.264250] NET: Registered protocol family 1
[    0.264304] Trying to unpack rootfs image as initramfs...
[    0.456484] Freeing initrd memory: 7708k freed
[    0.459508] Simple Boot Flag at 0x37 set to 0x1
[    0.459683] cpufreq-nforce2: No nForce2 chipset.
[    0.459709] Scanning for low memory corruption every 60 seconds
[    0.459811] audit: initializing netlink socket (disabled)
[    0.459827] type=2000 audit(1267182133.456:1): initialized
[    0.468530] highmem bounce pool size: 64 pages
[    0.468535] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.469953] VFS: Disk quotas dquot_6.5.2
[    0.470010] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.470534] fuse init (API version 7.12)
[    0.470613] msgmni has been set to 1680
[    0.470808] alg: No test for stdrng (krng)
[    0.470817] io scheduler noop registered
[    0.470819] io scheduler anticipatory registered
[    0.470821] io scheduler deadline registered
[    0.470860] io scheduler cfq registered (default)
[    0.471010] pci 0000:01:00.0: Boot video device
[    0.471122]   alloc irq_desc for 24 on node -1
[    0.471124]   alloc kstat_irqs on node -1
[    0.471132] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.471139] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.471272]   alloc irq_desc for 25 on node -1
[    0.471274]   alloc kstat_irqs on node -1
[    0.471283] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.471293] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.471443]   alloc irq_desc for 26 on node -1
[    0.471445]   alloc kstat_irqs on node -1
[    0.471453] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.471464] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.471615]   alloc irq_desc for 27 on node -1
[    0.471617]   alloc kstat_irqs on node -1
[    0.471626] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.471637] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.471739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.471890] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.472280] ACPI: AC Adapter [ADP1] (on-line)
[    0.472337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.472340] ACPI: Power Button [PWRF]
[    0.472403] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.472444] ACPI: Lid Switch [LID0]
[    0.472485] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.472492] ACPI: Power Button [PWRB]
[    0.472532] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.472535] ACPI: Sleep Button [SLPB]
[    0.472651] fan PNP0C0B:00: registered as cooling_device0
[    0.472656] ACPI: Fan [FAN0] (off)
[    0.472743] fan PNP0C0B:01: registered as cooling_device1
[    0.472748] ACPI: Fan [FAN1] (off)
[    0.473516] ACPI: SSDT bdf1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.474229] ACPI: SSDT bdf19020 00C78 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.476462] Monitor-Mwait will be used to enter C-1 state
[    0.476486] Monitor-Mwait will be used to enter C-2 state
[    0.476494] Marking TSC unstable due to TSC halts in idle
[    0.476516] Switched to high resolution mode on CPU 0
[    0.476527] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    0.476545] processor LNXCPU:00: registered as cooling_device2
[    0.476548] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.476992] ACPI: SSDT bdf1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.477379] ACPI: SSDT bdf1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.477747] Switched to high resolution mode on CPU 1
[    0.478391] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    0.478409] processor LNXCPU:01: registered as cooling_device3
[    0.478413] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.481577] thermal LNXTHERM:01: registered as thermal_zone0
[    0.481585] ACPI: Thermal Zone [TZ00] (51 C)
[    0.482478] thermal LNXTHERM:02: registered as thermal_zone1
[    0.482486] ACPI: Thermal Zone [TZ01] (51 C)
[    0.482539] isapnp: Scanning for PnP cards...
[    0.531892] ACPI: Battery Slot [BAT1] (battery absent)
[    0.836335] isapnp: No Plug & Play device found
[    0.837474] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.838730] brd: module loaded
[    0.839162] loop: module loaded
[    0.839225] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.839294] ahci 0000:00:1f.2: version 3.0
[    0.839307] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.839336]   alloc irq_desc for 28 on node -1
[    0.839338]   alloc kstat_irqs on node -1
[    0.839348] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    0.839400] ahci: SSS flag set, parallel bus scan disabled
[    0.839437] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.839441] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[    0.839446] ahci 0000:00:1f.2: setting latency timer to 64
[    0.860061] scsi0 : ahci
[    0.860142] scsi1 : ahci
[    0.860197] scsi2 : ahci
[    0.860253] scsi3 : ahci
[    0.860309] scsi4 : ahci
[    0.860363] scsi5 : ahci
[    0.860408] ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 28
[    0.860411] ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 28
[    0.860413] ata3: DUMMY
[    0.860415] ata4: DUMMY
[    0.860417] ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 28
[    0.860421] ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 28
[    0.861292] Fixed MDIO Bus: probed
[    0.861324] PPP generic driver version 2.4.2
[    0.861401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.861418] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.861429] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.861432] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.861474] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.865374] ehci_hcd 0000:00:1a.7: debug port 1
[    0.865381] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.865394] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800
[    0.880019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.880096] usb usb1: configuration #1 chosen from 1 choice
[    0.880124] hub 1-0:1.0: USB hub found
[    0.880130] hub 1-0:1.0: 6 ports detected
[    0.880192]   alloc irq_desc for 23 on node -1
[    0.880194]   alloc kstat_irqs on node -1
[    0.880199] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.880208] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.880211] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.880242] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.884143] ehci_hcd 0000:00:1d.7: debug port 1
[    0.884149] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.884162] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00
[    0.900018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.900074] usb usb2: configuration #1 chosen from 1 choice
[    0.900099] hub 2-0:1.0: USB hub found
[    0.900105] hub 2-0:1.0: 6 ports detected
[    0.900164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.900179] uhci_hcd: USB Universal Host Controller Interface driver
[    0.900198] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.900204] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.900207] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.900237] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.900272] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.900345] usb usb3: configuration #1 chosen from 1 choice
[    0.900370] hub 3-0:1.0: USB hub found
[    0.900376] hub 3-0:1.0: 2 ports detected
[    0.900421]   alloc irq_desc for 21 on node -1
[    0.900423]   alloc kstat_irqs on node -1
[    0.900427] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.900435] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.900438] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.900471] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.900504] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.900575] usb usb4: configuration #1 chosen from 1 choice
[    0.900602] hub 4-0:1.0: USB hub found
[    0.900608] hub 4-0:1.0: 2 ports detected
[    0.900654] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.900661] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.900664] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.900691] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.900717] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    0.900788] usb usb5: configuration #1 chosen from 1 choice
[    0.900815] hub 5-0:1.0: USB hub found
[    0.900821] hub 5-0:1.0: 2 ports detected
[    0.900867] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.900873] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.900877] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.900910] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.900936] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.901012] usb usb6: configuration #1 chosen from 1 choice
[    0.901037] hub 6-0:1.0: USB hub found
[    0.901042] hub 6-0:1.0: 2 ports detected
[    0.901088] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.901094] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.901098] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.901126] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.901152] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.901227] usb usb7: configuration #1 chosen from 1 choice
[    0.901253] hub 7-0:1.0: USB hub found
[    0.901258] hub 7-0:1.0: 2 ports detected
[    0.901303] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.901309] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.901312] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.901340] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.901373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.901456] usb usb8: configuration #1 chosen from 1 choice
[    0.901480] hub 8-0:1.0: USB hub found
[    0.901486] hub 8-0:1.0: 2 ports detected
[    0.901579] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.904198] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.905271] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.905276] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.905279] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.905282] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.905285] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.905338] mice: PS/2 mouse device common for all mice
[    0.905503] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.905533] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.905624] device-mapper: uevent: version 1.0.3
[    0.905703] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.905785] device-mapper: multipath: version 1.1.0 loaded
[    0.905788] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.905900] EISA: Probing bus 0 at eisa.0
[    0.905906] Cannot allocate resource for EISA slot 1
[    0.905908] Cannot allocate resource for EISA slot 2
[    0.905910] Cannot allocate resource for EISA slot 3
[    0.905912] Cannot allocate resource for EISA slot 4
[    0.905914] Cannot allocate resource for EISA slot 5
[    0.905928] EISA: Detected 0 cards.
[    0.906074] cpuidle: using governor ladder
[    0.906163] cpuidle: using governor menu
[    0.906628] TCP cubic registered
[    0.906778] NET: Registered protocol family 10
[    0.907205] lo: Disabled Privacy Extensions
[    0.907530] NET: Registered protocol family 17
[    0.907545] Bluetooth: L2CAP ver 2.13
[    0.907547] Bluetooth: L2CAP socket layer initialized
[    0.907549] Bluetooth: SCO (Voice Link) ver 0.6
[    0.907551] Bluetooth: SCO socket layer initialized
[    0.907583] Bluetooth: RFCOMM TTY layer initialized
[    0.907586] Bluetooth: RFCOMM socket layer initialized
[    0.907588] Bluetooth: RFCOMM ver 1.11
[    0.908158] Using IPI No-Shortcut mode
[    0.908213] PM: Resume from disk failed.
[    0.908224] registered taskstats version 1
[    0.908323]   Magic number: 14:56:25
[    0.908393] rtc_cmos 00:07: setting system clock to 2010-02-26 11:02:14 UTC (1267182134)
[    0.908396] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.908398] EDD information not available.
[    0.928782] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.180050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.180891] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC66G, max UDMA/133
[    1.180896] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.181943] ata1.00: configured for UDMA/133
[    1.196151] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[    1.196256] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.196295] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.196339] sd 0:0:0:0: [sda] Write Protect is off
[    1.196342] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.196365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.196483]  sda: sda1 sda2 sda3 sda4 <
[    1.248041] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    1.250337]  sda5 sda6 >
[    1.262015] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.401127] usb 1-3: configuration #1 chosen from 1 choice
[    1.640093] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.813370] usb 3-1: configuration #1 chosen from 1 choice
[    1.920045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.923388] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633B, SC01, max UDMA/100, ATAPI AN
[    1.923406] ata2.00: applying bridge limits
[    1.925895] ata2.00: configured for UDMA/100
[    1.945158] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633B  SC01 PQ: 0 ANSI: 5
[    1.951404] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.951408] Uniform CD-ROM driver Revision: 3.20
[    1.951494] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.951539] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.268064] ata5: SATA link down (SStatus 0 SControl 300)
[    2.604039] ata6: SATA link down (SStatus 0 SControl 300)
[    2.620058] Freeing unused kernel memory: 540k freed
[    2.620349] Write protecting the kernel text: 4568k
[    2.620396] Write protecting the kernel read-only data: 1836k
[    2.744627] Linux agpgart interface v0.103
[    2.750237] sky2 driver version 1.23
[    2.750313] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.750362] sky2 0000:06:00.0: setting latency timer to 64
[    2.750446] sky2 0000:06:00.0: Yukon-2 (chip 0xba) chip revision 0
[    2.750947]   alloc irq_desc for 29 on node -1
[    2.750949]   alloc kstat_irqs on node -1
[    2.751027] sky2 0000:06:00.0: irq 29 for MSI/MSI-X
[    2.751950] sky2 eth0: addr 00:24:54:0a:06:6c
[    2.760065] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    2.761026] acpi device:04: registered as cooling_device4
[    2.761161] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[    2.761197] ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
[    2.823044] usbcore: registered new interface driver hiddev
[    2.823095] usbcore: registered new interface driver usbhid
[    2.823098] usbhid: v2.6:USB HID core driver
[    2.840527] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input7
[    2.840606] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.0-1/input0
[    3.440110] xor: automatically using best checksumming function: pIII_sse
[    3.457010]    pIII_sse  :  7419.000 MB/sec
[    3.457012] xor: using function: pIII_sse (7419.000 MB/sec)
[    3.459278] device-mapper: dm-raid45: initialized v0.2594b
[    3.815467] PM: Starting manual resume from disk
[    3.815471] PM: Resume from partition 8:6
[    3.815473] PM: Checking hibernation image.
[    3.815574] PM: Resume from disk failed.
[    3.827813] EXT4-fs (sda5): barriers enabled
[    3.845855] kjournald2 starting: pid 439, dev sda5:8, commit interval 5 seconds
[    3.845868] EXT4-fs (sda5): delayed allocation enabled
[    3.845872] EXT4-fs: file extents enabled
[    3.846428] EXT4-fs: mballoc enabled
[    3.846442] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    4.467545] type=1505 audit(1267182138.055:2): operation="profile_load" pid=462 name=/usr/share/gdm/guest-session/Xsession
[    4.469682] type=1505 audit(1267182138.059:3): operation="profile_load" pid=463 name=/sbin/dhclient3
[    4.470434] type=1505 audit(1267182138.059:4): operation="profile_load" pid=463 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.470826] type=1505 audit(1267182138.059:5): operation="profile_load" pid=463 name=/usr/lib/connman/scripts/dhclient-script
[    4.513559] type=1505 audit(1267182138.103:6): operation="profile_load" pid=464 name=/usr/bin/evince
[    4.525134] type=1505 audit(1267182138.116:7): operation="profile_load" pid=464 name=/usr/bin/evince-previewer
[    4.531970] type=1505 audit(1267182138.120:8): operation="profile_load" pid=464 name=/usr/bin/evince-thumbnailer
[    4.566806] type=1505 audit(1267182138.156:9): operation="profile_load" pid=466 name=/usr/lib/cups/backend/cups-pdf
[   13.113258] udev: starting version 147
[   13.122236] Adding 1951856k swap on /dev/sda6.  Priority:-1 extents:1 across:1951856k
[   13.228354] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   13.228359] Disabling lock debugging due to kernel taint
[   13.298648] [fglrx] Maximum main memory to use for locked dma buffers: 2844 MBytes.
[   13.298989] [fglrx]   vendor: 1002 device: 9480 count: 1
[   13.299457] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[   13.299474] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.299480] pci 0000:01:00.0: setting latency timer to 64
[   13.299641] [fglrx] Kernel PAT support is enabled
[   13.299661] [fglrx] module loaded - fglrx 8.69.4 [Dec 11 2009] with 1 minors
[   13.322668] Linux video capture interface: v2.00
[   13.325610] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c335)
[   13.337651] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
[   13.337700] usbcore: registered new interface driver uvcvideo
[   13.337703] USB Video Class driver (v0.1.0)
[   13.344384] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.345780] lp: driver loaded but no devices found
[   13.370005] EXT4-fs (sda5): internal journal on sda5:8
[   13.376103] cfg80211: Calling CRDA to update world regulatory domain
[   13.394684] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.394698] ath5k 0000:02:00.0: setting latency timer to 64
[   13.394731] ath5k 0000:02:00.0: registered as 'phy0'
[   13.480194]   alloc irq_desc for 22 on node -1
[   13.480197]   alloc kstat_irqs on node -1
[   13.480204] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.480236] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.486004] ath: EEPROM regdomain: 0x68
[   13.486007] ath: EEPROM indicates we should expect a direct regpair map
[   13.486010] ath: Country alpha2 being used: 00
[   13.486012] ath: Regpair used: 0x68
[   13.498659] cfg80211: World regulatory domain updated:
[   13.498662] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.498665] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.498668] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.498670] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.498673] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.498675] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.503630] phy0: Selected rate control algorithm 'minstrel'
[   13.504371] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   13.560707] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[   13.561540] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   13.563892] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.563923] HDA Intel 0000:01:00.1: setting latency timer to 64
[   14.085844] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
[   14.123906] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[   14.389297] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.393413] sky2 eth0: enabling interface
[   14.393634] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.614936] __ratelimit: 6 callbacks suppressed
[   14.614939] type=1505 audit(1267174948.204:12): operation="profile_replace" pid=1147 name=/usr/share/gdm/guest-session/Xsession
[   14.616592] type=1505 audit(1267174948.204:13): operation="profile_replace" pid=1148 name=/sbin/dhclient3
[   14.617317] type=1505 audit(1267174948.208:14): operation="profile_replace" pid=1148 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   14.617709] type=1505 audit(1267174948.208:15): operation="profile_replace" pid=1148 name=/usr/lib/connman/scripts/dhclient-script
[   14.621337] type=1505 audit(1267174948.212:16): operation="profile_replace" pid=1149 name=/usr/bin/evince
[   14.658777] type=1505 audit(1267174948.248:17): operation="profile_replace" pid=1149 name=/usr/bin/evince-previewer
[   14.665885] type=1505 audit(1267174948.256:18): operation="profile_replace" pid=1149 name=/usr/bin/evince-thumbnailer
[   14.675132] type=1505 audit(1267174948.264:19): operation="profile_replace" pid=1151 name=/usr/lib/cups/backend/cups-pdf
[   14.675976] type=1505 audit(1267174948.264:20): operation="profile_replace" pid=1151 name=/usr/sbin/cupsd
[   14.678376] type=1505 audit(1267174948.268:21): operation="profile_replace" pid=1152 name=/usr/sbin/tcpdump
[   15.806114] ppdev: user-space parallel port driver
[   16.616313]   alloc irq_desc for 30 on node -1
[   16.616316]   alloc kstat_irqs on node -1
[   16.616329] fglrx_pci 0000:01:00.0: irq 30 for MSI/MSI-X
[   16.618779] [fglrx] Firegl kernel thread PID: 1624
[   16.829043] [fglrx] Gart USWC size:933 M.
[   16.829047] [fglrx] Gart cacheable size:369 M.
[   16.829052] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   16.829055] [fglrx] Reserved FB block: Unshared offset:fd13000, size:2ed000
[   16.829057] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[   20.594547] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   41.581508] wlan0: authenticate with AP 00:22:93:ca:6e:b8
[   41.583204] wlan0: authenticated
[   41.583207] wlan0: associate with AP 00:22:93:ca:6e:b8
[   41.586055] wlan0: RX AssocResp from 00:22:93:ca:6e:b8 (capab=0x411 status=0 aid=1)
[   41.586058] wlan0: associated
[   41.586656] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   51.633025] wlan0: no IPv6 routers present

garafatma

#17
26 Şubat 2010 - 11:08:51
@ırmak önemli değil, yanlış kalmış aklımda sanırım.


Açılırken bekleyen bir yer dikkatini çektimi?
Bira, Tanrı'nın bizi sevdiğinin ve eğlenmemizi istediğinin kanıtıdır.

>-- Askıdaki Çeviri --< Ubuntu Türkçe Çevirilerine Sizde Destek Olun
Elveda metal müziğin tanrısı... \m/ Ronnie James DIO: 1942 - 2010

ırmak

#18
26 Şubat 2010 - 11:14:30
Alıntı yapılan: keiser_soze - 26 Şubat 2010 - 11:08:51
@ırmak önemli değil, yanlış kalmış aklımda sanırım.


Açılırken bekleyen bir yer dikkatini çektimi?

Yaptığım bir iki değişikliği geriye almaya karar verdim.
20-41 ile 41-51 arasında her ne oluyorsa sanırım sorun bunlardan kaynaklanıyor.
Çözebilirsem yazacağım.
Teşekkürler.

bytan

#19
27 Şubat 2010 - 11:53:35
@Tuxie, yaşadığın gecikmelerden en büyüğü mysqld ile ilgili.
Güncellemelere düşmediyse düşer:

https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/444479
https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/448656
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

Tuxie

#20
27 Şubat 2010 - 12:14:05
ya ubuntu açılırken en fazla duraklamayı yanıp sönen - işaretinde yaşıyor.güncellemeleri alarak sorun düzelecekmi yani?
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri