[Çözüldü] IO Apic Hatası

[ScaryMan]

Ubuntu başlarken, 9.04'a ilk geçtiğimden beri, IO APIC resources cannot read gibisinden bir satır geldikten sonra açılmaya başlıyor. Tam okuyamadan geçtiği için yazı tam böyle olmayabilir. Bunun nedeni nedir?

[ironic]

Biraz araştırdım da hatanın doğrusu şu sanırım?

IO APIC resources could not be allocated

[ScaryMan]

Evet evet buydu.

[ironic]

Aşağıdaki adreste bir çözüm anlatılmış. Kernel değişkenlerini bilmediğim için daha bilgili bir arkadaşın çözümü anlatması daha iyi olur. 

http://ubuntu-virginia.ubuntuforums.org/showthread.php?p=7695056

[ScaryMan]

Bu linkteki gibi hatalar almıyorum ben yalnız. Sadece "starting up..." dan sonraki satırı alıyorum. Orada da çıkan o soldaki rakamlar aynı mı hatırlamıyorum. Daha doğrusu tam göremeden geçtiği için...

[localhost]

Sorun olacak bir hata oldugunu sanmiyorum. VirtualBoxta da IO APIC aktif etmezsen ayni hatayi aliyorsun Ne oldugunu ögrenmek istiyorsan, http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller buraya bakabilirsin.

[ScaryMan]

Yok, zaten görünürde bir sorun çıkardığı yok. Fakat belki bilmediğim, anlamadığım bir şekilde sisteme, performansa ne bileyim başka bir şeye etki ediyordur diye danışayım dedim.

[bytan]

Menu.lst dosyanda kernel satırına aşağıdakini ekleyerek deneme yapabilirsin:

Kod Seç Genişlet

noapic nolapic acpi=off

Soldaki rakamlar sürekli değişirler. Sadece zamanı gösteriyorlar. Söylendiği gibi öyle mühim bir durum değil.

[ScaryMan]

Kod Seç Genişlet

title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid 95083077-92c9-4dbb-bb12-0cf2ac3ec3a9
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=95083077-92c9-4dbb-bb12-0cf2ac3ec3a9 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet


Bunların altına mı? Her bir Ubuntu Kerneli için yapmam gerekiyor mu?

[bytan]

Denem amaçlı sadece bu girdi de, kernel satırının sonuna splash kelimesinden sonra ekleyin.

[ScaryMan]

Yaptım ama yine de aynı hata gözüküyor başlangıçta. BIOS'tan baktım, orada da kapalı APIC'le ilgili olan şey.

[garafatma]

Bu hatayı GRUB geçtikten sonra alıyorsun değil mi?

Kod Seç Genişlet

head -n -50 /var/log/dmesg

çıktısını buraya yapıştırır mısın?

[ScaryMan]

Evet, grub'tan Ubuntu'yu seçtikten sonra "starting" dedikten sonraki satırda geliyor, sonra hemen Ubuntu yükleme ekranı geliyor.

Çıktı biraz uzun:

Kod Seç Genişlet

[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 378ba000 - 37fefefe
[    0.000000] Allocated new RAMDISK: 0087d000 - 00fb2efe
[    0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fefefd to 0087d000 - 00fb2efd
[    0.000000] 139MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008780ac]    TEXT DATA BSS ==> [0000100000 - 00008780ac]
[    0.000000]   #4 [0000879000 - 000087d000]    INIT_PG_TABLE ==> [0000879000 - 000087d000]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [000087d000 - 0000fb2efe]      NEW RAMDISK ==> [000087d000 - 0000fb2efe]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0003fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 280 pages used for memmap
[    0.000000]   HighMem zone: 35546 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: root=UUID=95083077-92c9-4dbb-bb12-0cf2ac3ec3a9 ro quiet splash noapic nolapic acpi=off
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2806.704 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 5242240 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 1018512k/1048512k available (4115k kernel code, 29252k reserved, 2199k data, 532k init, 143304k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0733000 - 0xc07b8000   ( 532 kB)
[    0.004000]       .data : 0xc0504f5f - 0xc072ae60   (2199 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0504f5f   (4115 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.40 BogoMIPS (lpj=11226816)
[    0.004049] Security Framework initialized
[    0.004067] SELinux:  Disabled at boot.
[    0.004098] AppArmor: AppArmor initialized
[    0.004118] Mount-cache hash table entries: 512
[    0.004344] Initializing cgroup subsys ns
[    0.004351] Initializing cgroup subsys cpuacct
[    0.004355] Initializing cgroup subsys memory
[    0.004363] Initializing cgroup subsys freezer
[    0.004384] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004388] CPU: L2 cache: 512K
[    0.004393] CPU: Hyper-Threading is disabled
[    0.004417] Checking 'hlt' instruction... OK.
[    0.020874] SMP alternatives: switching to UP code
[    0.120787] Freeing SMP alternatives: 18k freed
[    0.120899] weird, boot CPU (#0) not listedby the BIOS.
[    0.120902] SMP motherboard not detected.
[    0.120906] Local APIC not detected. Using dummy APIC emulation.
[    0.120908] SMP disabled
[    0.121582] Brought up 1 CPUs
[    0.121587] Total of 1 processors activated (5613.40 BogoMIPS).
[    0.121610] CPU0 attaching NULL sched-domain.
[    0.124431] net_namespace: 776 bytes
[    0.124449] Booting paravirtualized kernel on bare hardware
[    0.124743] Time: 11:54:45  Date: 08/27/09
[    0.124751] regulator: core version 0.5
[    0.124800] NET: Registered protocol family 16
[    0.124964] EISA bus registered
[    0.157300] PCI: PCI BIOS revision 2.10 entry at 0xfb550, last bus=1
[    0.157303] PCI: Using configuration type 1 for base access
[    0.158457] ACPI: Interpreter disabled.
[    0.158649] SCSI subsystem initialized
[    0.158699] libata version 3.00 loaded.
[    0.158762] usbcore: registered new interface driver usbfs
[    0.158784] usbcore: registered new interface driver hub
[    0.158818] usbcore: registered new device driver usb
[    0.158951] PCI: Probing PCI hardware
[    0.158956] PCI: Probing PCI hardware (bus 00)
[    0.159019] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[    0.159101] pci 0000:00:01.0: supports D1
[    0.159145] pci 0000:00:09.0: reg 10 io port: [0xc000-0xc0ff]
[    0.159152] pci 0000:00:09.0: reg 14 32bit mmio: [0xe3000000-0xe30000ff]
[    0.159179] pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[    0.159189] pci 0000:00:09.0: supports D1 D2
[    0.159191] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.159196] pci 0000:00:09.0: PME# disabled
[    0.159232] pci 0000:00:0a.0: reg 10 io port: [0xc400-0xc4ff]
[    0.159272] pci 0000:00:0a.0: supports D1 D2
[    0.159331] pci 0000:00:10.0: reg 20 io port: [0xc800-0xc81f]
[    0.159350] pci 0000:00:10.0: supports D1 D2
[    0.159352] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159356] pci 0000:00:10.0: PME# disabled
[    0.159411] pci 0000:00:10.1: reg 20 io port: [0xcc00-0xcc1f]
[    0.159431] pci 0000:00:10.1: supports D1 D2
[    0.159433] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159437] pci 0000:00:10.1: PME# disabled
[    0.159489] pci 0000:00:10.2: reg 20 io port: [0xd000-0xd01f]
[    0.159508] pci 0000:00:10.2: supports D1 D2
[    0.159510] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159515] pci 0000:00:10.2: PME# disabled
[    0.159549] pci 0000:00:10.3: reg 10 32bit mmio: [0xe3001000-0xe30010ff]
[    0.159587] pci 0000:00:10.3: supports D1 D2
[    0.159589] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159593] pci 0000:00:10.3: PME# disabled
[    0.159665] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.159672] pci 0000:00:11.0: quirk: region 0400-047f claimed by vt8235 PM
[    0.159677] pci 0000:00:11.0: quirk: region 0500-050f claimed by vt8235 SMB
[    0.159739] pci 0000:00:11.1: reg 20 io port: [0xd400-0xd40f]
[    0.159798] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff]
[    0.159838] pci 0000:00:11.5: supports D1 D2
[    0.159875] pci 0000:00:12.0: reg 10 io port: [0xe000-0xe0ff]
[    0.159883] pci 0000:00:12.0: reg 14 32bit mmio: [0xe3002000-0xe30020ff]
[    0.159917] pci 0000:00:12.0: supports D1 D2
[    0.159919] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159923] pci 0000:00:12.0: PME# disabled
[    0.159981] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff]
[    0.160011] pci 0000:01:00.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff]
[    0.160032] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[    0.160082] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff]
[    0.160087] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
[    0.160917] pci 0000:00:11.0: VIA IRQ router [1106:3177]
[    0.161051] Bluetooth: Core ver 2.13
[    0.161051] NET: Registered protocol family 31
[    0.161051] Bluetooth: HCI device and connection manager initialized
[    0.161051] Bluetooth: HCI socket layer initialized
[    0.161051] NET: Registered protocol family 8
[    0.161051] NET: Registered protocol family 20
[    0.161051] NetLabel: Initializing
[    0.161051] NetLabel:  domain hash size = 128
[    0.161051] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.161051] NetLabel:  unlabeled traffic allowed by default
[    0.161051] AppArmor: AppArmor Filesystem Enabled
[    0.161051] pnp: PnP ACPI: disabled
[    0.161051] PnPBIOS: Scanning system for PnP BIOS support...
[    0.161051] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf90
[    0.161051] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfc0, dseg 0xf0000
[    0.161872] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
[    0.161891] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[    0.161894] system 00:07: iomem range 0xfffe0000-0xffffffff has been reserved
[    0.161897] system 00:07: iomem range 0xfec00000-0xfec0ffff has been reserved
[    0.161900] system 00:07: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.161903] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[    0.161910] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
[    0.161913] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
[    0.161915] system 00:08: iomem range 0xf8000-0xfffff could not be reserved
[    0.161918] system 00:08: iomem range 0xcc800-0xcffff has been reserved
[    0.162122] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.162124] pci 0000:00:01.0:   IO window: disabled
[    0.162130] pci 0000:00:01.0:   MEM window: 0xe0000000-0xe1ffffff
[    0.162135] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
[    0.162153] pci 0000:00:01.0: setting latency timer to 64
[    0.162157] bus: 00 index 0 io port: [0x00-0xffff]
[    0.162159] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.162161] bus: 01 index 0 mmio: [0x0-0x0]
[    0.162163] bus: 01 index 1 mmio: [0xe0000000-0xe1ffffff]
[    0.162166] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff]
[    0.162168] bus: 01 index 3 mmio: [0x0-0x0]
[    0.162176] NET: Registered protocol family 2
[    0.162227] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.162227] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.165160] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.165953] TCP: Hash tables configured (established 131072 bind 65536)
[    0.165959] TCP reno registered
[    0.166207] NET: Registered protocol family 1
[    0.166398] checking if image is initramfs... it is
[    0.793021] Freeing initrd memory: 7383k freed
[    0.793115] cpufreq: No nForce2 chipset.
[    0.793295] audit: initializing netlink socket (disabled)
[    0.793325] type=2000 audit(1251374085.791:1): initialized
[    0.800129] highmem bounce pool size: 64 pages
[    0.800138] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.801358] VFS: Disk quotas dquot_6.5.1
[    0.801422] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.802112] fuse init (API version 7.10)
[    0.802206] msgmni has been set to 1724
[    0.802445] alg: No test for stdrng (krng)
[    0.802461] io scheduler noop registered
[    0.802463] io scheduler anticipatory registered
[    0.802465] io scheduler deadline registered
[    0.802487] io scheduler cfq registered (default)
[    0.802503] PCI: VIA PCI bridge detected.Disabling DAC.
[    0.802598] pci 0000:01:00.0: Boot video device
[    0.802706] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.802717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.802805] isapnp: Scanning for PnP cards...
[    1.156866] isapnp: No Plug & Play device found
[    1.158024] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.158124] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.158542] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.159391] brd: module loaded
[    1.159738] loop: module loaded
[    1.159834] Fixed MDIO Bus: probed
[    1.159842] PPP generic driver version 2.4.2
[    1.159908] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.159986] Driver 'sd' needs updating - please use bus_type methods
[    1.159997] Driver 'sr' needs updating - please use bus_type methods
[    1.160547] pata_via 0000:00:11.1: version 0.3.3
[    1.160782] scsi0 : pata_via
[    1.160912] scsi1 : pata_via
[    1.160955] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd400 irq 14
[    1.160959] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd408 irq 15
[    1.324485] ata1.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
[    1.324489] ata1.00: 80293248 sectors, multi 16: LBA
[    1.340366] ata1.00: configured for UDMA/133
[    1.512277] ata2.00: ATAPI: HL-DT-ST GCE-8527B, 1.01, max UDMA/33
[    1.512313] ata2.01: ATAPI: GCR-8523B, 1.01, max MWDMA2
[    1.544169] ata2.00: configured for UDMA/33
[    1.560614] ata2.01: configured for MWDMA2
[    1.561100] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
[    1.561226] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors: (41.1 GB/38.2 GiB)
[    1.561246] sd 0:0:0:0: [sda] Write Protect is off
[    1.561249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.561277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.561360] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors: (41.1 GB/38.2 GiB)
[    1.561376] sd 0:0:0:0: [sda] Write Protect is off
[    1.561379] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.561406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.561410]  sda: sda1 sda2 sda3
[    1.601288] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.601354] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.601707] scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8527B  1.01 PQ: 0 ANSI: 5
[    1.605198] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[    1.605203] Uniform CD-ROM driver Revision: 3.20
[    1.605329] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.605387] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.608058] scsi 1:0:1:0: CD-ROM            HL-DT-ST CD-ROM GCR-8523B 1.01 PQ: 0 ANSI: 5
[    1.613401] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.613487] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    1.613530] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    1.613713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.613770] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    1.613842] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    1.613890] ehci_hcd 0000:00:10.3: irq 11, io mem 0xe3001000
[    1.623917] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    1.623999] usb usb1: configuration #1 chosen from 1 choice
[    1.624035] hub 1-0:1.0: USB hub found
[    1.624046] hub 1-0:1.0: 6 ports detected
[    1.624175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.624196] uhci_hcd: USB Universal Host Controller Interface driver
[    1.624258] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.624308] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.624330] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000c800
[    1.624427] usb usb2: configuration #1 chosen from 1 choice
[    1.624454] hub 2-0:1.0: USB hub found
[    1.624464] hub 2-0:1.0: 2 ports detected
[    1.624570] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.624617] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.624640] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000cc00
[    1.624722] usb usb3: configuration #1 chosen from 1 choice
[    1.624749] hub 3-0:1.0: USB hub found
[    1.624758] hub 3-0:1.0: 2 ports detected
[    1.624859] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.624905] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.624929] uhci_hcd 0000:00:10.2: irq 3, io base 0x0000d000
[    1.625019] usb usb4: configuration #1 chosen from 1 choice
[    1.625045] hub 4-0:1.0: USB hub found
[    1.625056] hub 4-0:1.0: 2 ports detected
[    1.625228] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[    1.625551] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.625561] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.625698] mice: PS/2 mouse device common for all mice
[    1.625807] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.625834] rtc0: alarms up to one day, 114 bytes nvram
[    1.625926] device-mapper: uevent: version 1.0.3
[    1.626071] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    1.626130] device-mapper: multipath: version 1.0.5 loaded
[    1.626134] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.626248] EISA: Probing bus 0 at eisa.0
[    1.626288] EISA: Detected 0 cards.
[    1.626322] cpuidle: using governor ladder
[    1.626325] cpuidle: using governor menu
[    1.626893] TCP cubic registered
[    1.626974] NET: Registered protocol family 10
[    1.627406] lo: Disabled Privacy Extensions
[    1.627728] NET: Registered protocol family 17
[    1.627754] Bluetooth: L2CAP ver 2.11
[    1.627756] Bluetooth: L2CAP socket layer initialized
[    1.627761] Bluetooth: SCO (Voice Link) ver 0.6
[    1.627763] Bluetooth: SCO socket layer initialized
[    1.627813] Bluetooth: RFCOMM socket layer initialized
[    1.627824] Bluetooth: RFCOMM TTY layer initialized
[    1.627826] Bluetooth: RFCOMM ver 1.10
[    1.627871] IO APIC resources could be not be allocated.
[    1.627958] Using IPI No-Shortcut mode
[    1.628073] registered taskstats version 1
[    1.628174]   Magic number: 5:99:935
[    1.628278] rtc_cmos 00:03: setting system clock to 2009-08-27 11:54:46 UTC (1251374086)
[    1.628282] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.628284] EDD information not available.
[    1.629081] Freeing unused kernel memory: 532k freed
[    1.629199] Write protecting the kernel text: 4116k
[    1.629241] Write protecting the kernel read-only data: 1528k
[    1.658620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1


[garafatma]

Kod Seç Genişlet

Local APIC not detected. Using dummy APIC emulation.

Sanırım bu yüzden o hatayı veriyor. Ancak neden verdiğini araştırıyorum

[ScaryMan]

Teşekkürler. Peki biraz önce kernel satırına eklediğim, sistemi kapatmaya etki eder mi? Çünkü sistemi kapat dedim zaman "system halted" yazısı çıkıyor, fakat işlemci fanı ve diğer birimler çalışmaya devam ediyor?

[bytan]

Evet sistemi kapatmaya da etki eder. Zaten işe yaramadıysa silebilirsiniz eklediklerinizi.

[ScaryMan]

Silmeme rağmen düzelmedi?

Ekleme: Tamam kernel satırına acpi=force ekleyince sistem kendini düzgün kapatmaya başladı. Ama açılıştaki IO Apic için çözümlere hala açığım.

[ironic]

Bu sorun kernel donanım uyumsuzluğuyla alakalı anladığım kadarıyla. Yeni gelecek kernel güncellemesiyle düzelebilir belki. Bu arada Mandriva Grub ekranında kernel parametreleri eklenebiliyormuş ve bu sorun için de hazır değer vardı. 

[ScaryMan]

Sanırım bir sonraki kernel güncellemesini beklemek en iyisi. Teşekkürler yardımlar için. Başlığı çözüldü olarak değiştiriyorum.